2-channel marine amplifier — 200 watts RMS x 2 at 2 ohms
Item #: 2064KXM4K2
Your price: $349.99 Earn up to 350 Rewards points
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
Item #: 2064KXM4K2
Your price: $349.99 Earn up to 350 Rewards points
The key to building a great marine amp is building a great amp, period. When Kicker designed their KXM line, they used their popular Kicker KX car amps as a starting point. Kicker KXM amps combine first-rate technology with water-resistant, protective hardware outside, so they're ready for life on the water.
No matter how snug the installation space, a marine amp must be tough enough to stand up to the marine environment. Kicker's KXM400.2 marine amp features a conformal coated circuit board for improved water and dust resistance, plus corrosion-resistant power connections, a gasket-sealed front cover, and stainless steel mounting hardware that won't rust all over your boat's gel coat or carpeting. The all-weather protection even extends to the UV-protected heat sink finish.
The RCA inputs on this Kicker amp will accept the signal from just about any marine stereo.
The KXM400.2 delivers the power you need for the tower speakers on your boat, delivering up to 200 watts RMS per channel. This efficient, reliable amp stays cool even when it's pushed hard, thanks to its Class-D design. Space can be at a premium on some boats, but this amp's compact exterior makes it easier to mount in tight spaces.
The amp's RCA inputs accept speaker-level or line-level signals, so you can connect this amp to almost any stereo. Kicker's Fail-Safe Integration Technology (FIT™) reduces noise and rejects interference generated by your boat's electronics.
|RMS Power Output (Watts x Channels)||100 x 2|
|Frequency Response at Rated RMS Power||20-20k Hz|
|THD at Rated RMS Power||1%|
|Signal to Noise Ratio||75 dB|
|Peak Power Output (Watts x Channels)||400 x 2|
|Power at 2 Ohms (Watts x Channels)||200 x 2|
|Bridged Power (Watts x Channels)||400 x 1|
|Minimum Impedance Bridged||4|
|Minimum Impedance Unbridged||2|
|Low-Pass Crossover Frequency||40-5,000 Hz|
|Low-Pass Slope (dB/octave)||24 dB/oct|
|High-Pass Crossover Frequency||10-500 Hz|
|High-Pass Slope (dB/octave)||24 dB/oct|
|Bass Boost Frequency||40Hz|
|Speaker Level Inputs||Yes|
|Preamp Outputs||1 pair|
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
Marine Amplifier: The Kicker KXM400.2 marine amplifier's special weather-resistant features allow it to withstand the harsh marine environment and give you dependable performance. The internal circuit board has been sprayed with a moisture-deterring, protective conformal coating for water and dirt resistance. The power, speaker, and input connections are gasket-sealed, as is the cover hiding the control settings, creating a water-resistant barrier to key components. Stainless steel mounting hardware prevents rust stains, and the UV-treated chassis finish battles harsh sunlight.
Class D Amplifier Design: The full-range Class D amplifier uses digital switching to amplify audio signals, resulting in high efficiency and less heat. The Class D design also allows a small footprint for increased cargo space.
CEA-2006 Compliant: CEA-2006 is a system of testing and measurement methods for mobile audio amplifiers. This voluntary standard advocates a uniform method for measuring an amplifier's RMS power output and signal-to-noise ratio. The criteria for measuring power uses a DC input voltage of 14.4 volts and the RMS power output is measured into a 4Ω load, with 1% or less Total Harmonic Distortion plus noise (THD+N), and over a frequency range of 20 Hz to 20 kHz (for full range amplifiers). Signal-to-Noise ratio is measured in weighted absolute decibels (dBA) at a reference of 1 watt into 4Ω. CEA-2006 allows consumers to compare amplifiers on an equal basis. Using CEA-2006 criteria, the Kicker KXM400.2 is rated at 100 watts RMS x 2 channels, with a 75 dBA signal to noise ratio.
Specifications: The manual also lists these non CEA-2006 compliant specifications:
Kicker Livin' Loud Certified Power: The amplifier comes with a certificate that indicates the total maximum RMS power output of the particular amplifier, along with the model number, serial number, and whether the amplifier passed the total harmonic distortion, signal-to-noise ratio, and protection circuit tests.
Protection Circuitry: The KXM400.2 has protection circuitry that will turn the amp off in the event of overheating, over voltage (power input), under voltage (power input), and short circuit (speaker output). If the Protection LED on the front side of the amp illuminates red, the protection circuit has engaged and the amp will not play until the problem is resolved.
Gain: To accommodate the varying range of signal levels coming from today's factory and aftermarket radios, the Kicker KXM400.2 features an adjustable gain control (low level: 125mV-5V, high level: 250mV-10V), labeled from 0 to 11.
Input Level Switch: Set the input level switch to low when using preamp level input signals and high when using speaker level input signals.
Kick EQ: The amp's Kick EQ bass boost circuit is continuously variable from 0 to +18 dB and centered at 40 Hz.
Auto Turn-On: The Auto Turn-On switch offers three options:
Power Connections: The power and ground connections are set-screw terminals that will accommodate up to 4-gauge wire. The remote turn-on set-screw terminal will accept up to 8-gauge wire. The included Allen-wrench is required to loosen/tighten the terminals.
Note: The Amplifier is not equipped with an internal fuse. An external 60-amp fuse (not included) must be installed on the power wire. If the system has only this amp and a wiring kit is used that includes a fuse with a value other than 60-amps, the original should be replaced with a 60-amp fuse.
Speaker Outputs: The Kicker KXM400.2 is equipped with two pair of set-screw speaker output terminals. The terminals will accommodate up to 8-gauge wire and are loosened/tightened with the included Allen-wrench.
Dual Sensitivity Inputs: The KXM series amplifiers have dual input sensitivity differential RCA inputs, which will accept either speaker-level (high) or preamp (low) signals from your source unit. A high-level signal can be run from the head unit's speaker outputs to the stereo RCA inputs of the amplifier using Speaker Wire to RCA adapters (206KiSL, sold separately). The Input Level Switch on the amp should be set to high when using a speaker-level input, and low when using a line-level input.
Line Level Output: The amplifier has a pair of RCA line level outputs for feeding another amplifier. This is the same signal that is present at the amp's inputs. Either input method (speaker-level or RCA) will provide a low-level output signal to the RCA outputs. The amplifier's crossovers have no effect on the line level output signal, however, if you input a filtered signal from the head unit, the amp's low-level output will also be filtered.
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.