1.888.955.6000
 
 
1-888-955-6000
crutchfield.com
Crutchfield

Kicker CK4

Complete 4-gauge amplifier wiring kit — includes 2-channel patch cable and speaker wire

Watch video
Zoom
  • Kicker CK4

    4-gauge complete wiring kit

  • Kicker CK4

  • Kicker CK4

Crutchfield OMC logo
We don't check this item for fit or compatibility.
 

Our take on the Kicker CK4

by Buck Pomerantz
Kicker

This kit delivers all the power and signal your system needs

Your amplifier needs hefty power and ground wiring in order to deliver the big power you want. Kicker's CK4 amp wiring kit includes the power, ground, turn-on, and signal wiring for any amplifier with a fuse rating of up to 100 amperes. This kit is suitable for an amplifier or amp system with a total output of about 650 watts RMS for Class AB amps or about 1000 watts RMS for Class D amps.

Includes patch cable and speaker wire

The CK4 kit includes a 17-foot, 2-channel twisted pair patch cable that'll send the signal reliably from the receiver to your amp with minimal noise. Also, Kicker provides 40 feet of 16-gauge speaker wire, enough to take care of both the front and rear speakers in most installations. Kicker makes all their wires from oxygen-free copper so you can count on maximum power and signal transfer with minimum resistance or interference.

Highlights:

  • amplifier wiring kit
  • cables meet or exceed the American Wire Gauge specifications and requirements
  • 17 feet of 4-gauge power cable with attached ring terminal and protective wire loom — blue
  • 2 feet of 4-gauge ground cable with attached ring terminal — gray
  • 17 feet of 16-gauge turn-on lead wire — clear
  • one 2-channel 17-foot twisted pair RCA patch cable
  • 40 feet of 16-gauge speaker wire
  • AFS fuse holder and 100-amp fuse
  • assortment of wire termination hardware and cable ties
  • extends your Kicker amplifier's warranty by one year, if purchased along with the amp
  • warranty: 1 year
  • Our 60-day money-back guarantee
 

Hands-on research from the Crutchfield Labs (what are the Labs?)

Product Research
What's in the box?

  • 17' Length of 4-gauge power wire terminated with a 5/16" ring-terminal on one end (blue/black jacket)
  • 2' Length of 4-gauge ground wire terminated with a 5/16" ring-terminal on one end (dark gray jacket)
  • 17' Length of 16-gauge remote turn-on wire (clear jacket)
  • AFS fuse holder
  • 100 amp AFS fuse (installed)
  • 17' Stereo RCA patch cord
  • 40' Length of 16-gauge speaker wire
  • One 7/8" Self-tapping screw (ground)
  • 1 Flat washer
  • 1 Plastic grommet
  • 1 Red butt-connector
  • Six 5" wire ties
  • Four 3/16" crimp-on spade-connectors
  • 2 Blue spade-connector sleeves
  • 2 Black spade-connector sleeves

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features

Single Amplifier 4-AWG Kit: This kit includes the following:

  • One 17' length of 4-gauge power wire (terminated by a 5/8" wide, 5/16" diameter ring-terminal)
  • One 2' length of 4-gauge ground wire (terminated by a 5/8" wide, 5/16" diameter ring-terminal)
  • One 17' length of 16-gauge remote turn-on lead
  • 17' Stereo RCA patch cord
  • 40' Length of speaker wire
  • AFS fuse holder
  • 100A AFS fuse (installed)
  • One 7/8" self-tapping ground screw with flat washer
  • One plastic grommet
  • Four 3/16" crimp-on spade-connectors (5/16" outer width)
  • 2 Blue spade-connector sleeves
  • 2 Black spade-connector sleeves
  • Six 5" wire ties
  • One red butt-connector

Hyper-Flex Power Cable: The power, ground, and speaker wires feature a Hyper-Flex jacket for easy installation. The RCA patch cord also has a Hyper-Flex jacket. Four feet of the power wire is covered with a wire loom to protect it in the engine compartment.

Silver Tinned OFC Copper: The power and ground cables are constructed of 1862 strand silver tinned OFC copper. The speaker wire is 111 strand silver tinned OFC copper.

Fuse Holder: The fuse holder requires a 5mm Allen wrench to secure the input and output wires, and to change the fuse. There are four holes in the base for mounting and the dimensions are approximately:

  • Width: 3-1/2"
  • Height: 1-3/8"
  • Depth: 1-5/8"
 

Product reviews from the Crutchfield Labs (what are the Labs?)

Video: Kicker car amplifier power wire

Video: Kicker car amplifier power wire

by Video Guest
2/26/2014
 
Video: Kicker car amplifier power wire

Top-quality power wire is an essential part of getting the best performance out of your amplifier. Check out this demonstration of Kicker oxygen-free power wire at the Kicker booth at CES 2014, and...

 
Be the first to review this product
Great Gear Giveaway rewards card

Submit a review and you will be entered to win a $150 gift card

Crutchfield Great Gear Giveaway Official Sweepstakes Rules

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

For a more in-depth review and enhanced detailed information on the Kicker CK4, please visit the Crutchfield website product page (/ISEO-rccbcspd/p_206CK4/Kicker-CK4.html ).

Searches related to the Kicker CK4 Complete 4-gauge amplifier wiring kit — includes 2-channel patch cable and speaker wire