Chat
Contact us
Close contact box
Connect ID #
112 454 797 4
Connect ID #
112 454 797 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Kicker CK4 Complete 4-gauge amplifier wiring kit — includes 2-channel patch cable and speaker wire

Item # 206CK4

Your amplifier needs hefty power and ground wiring in order to deliver the big power you want.

Your amplifier needs hefty power and ground wiring in order to deliver the big power you want.

California customers:
Please click here for your Proposition 65 warning.

1 question - 2 answers

Item # 206CK4

About the Kicker CK4

Buck Pomerantz

This kit delivers all the power and signal your system needs

Your amplifier needs hefty power and ground wiring in order to deliver the big power you want. Kicker's CK4 amp wiring kit includes the power, ground, turn-on, and signal wiring for any amplifier with a fuse rating of up to 100 amperes. This kit is suitable for an amplifier or amp system with a total output of about 650 watts RMS for Class AB amps or about 1000 watts RMS for Class D amps.

This kit delivers all the power and signal your system needs

Your amplifier needs hefty power and ground wiring in order to deliver the big power you want. Kicker's CK4 amp wiring kit includes the power, ground, turn-on, and signal wiring for any amplifier with a fuse rating of up to 100 amperes. This kit is suitable for an amplifier or amp system with a total output of about 650 watts RMS for Class AB amps or about 1000 watts RMS for Class D amps.

Includes patch cable and speaker wire

The CK4 kit includes a 17-foot, 2-channel twisted pair patch cable that'll send the signal reliably from the receiver to your amp with minimal noise. Also, Kicker provides 40 feet of 16-gauge speaker wire, enough to take care of both the front and rear speakers in most installations. Kicker makes all their wires from oxygen-free copper so you can count on maximum power and signal transfer with minimum resistance or interference.

READ LESS

Product highlights:

  • amplifier wiring kit
  • cables meet or exceed the American Wire Gauge specifications and requirements
  • 17 feet of 4-gauge power cable with attached ring terminal and protective wire loom — blue
  • 2 feet of 4-gauge ground cable with attached ring terminal — gray
  • 17 feet of 16-gauge turn-on lead wire — clear
  • one 2-channel 17-foot twisted pair RCA patch cable
  • 40 feet of 16-gauge speaker wire
  • AFS fuse holder and 100-amp fuse
  • assortment of wire termination hardware and cable ties
  • extends your Kicker amplifier's warranty by one year, if purchased along with the amp
  • warranty: 1 year
  • MFR # CK4

What's in the box:

  • 17' Length of 4-gauge power wire terminated with a 5/16" ring-terminal on one end (blue/black jacket)
  • 2' Length of 4-gauge ground wire terminated with a 5/16" ring-terminal on one end (dark gray jacket)
  • 17' Length of 16-gauge remote turn-on wire (clear jacket)
  • AFS fuse holder
  • 100 amp AFS fuse (installed)
  • 17' Stereo RCA patch cord
  • 40' Length of 16-gauge speaker wire
  • One 7/8" Self-tapping screw (ground)
  • 1 Flat washer
  • 1 Plastic grommet
  • 1 Red butt-connector
  • Six 5" wire ties
  • Four 3/16" crimp-on spade-connectors
  • 2 Blue spade-connector sleeves
  • 2 Black spade-connector sleeves

Featured video:

Customer reviews for Kicker CK4

Loading reviews...

Average review:

4.5 out of 5 stars
14 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Kicker CK4

Mark G.

Product Research

Features

Single Amplifier 4-AWG Kit: This kit includes the following:

  • One 17' length of 4-gauge power wire (terminated by a 5/8" wide, 5/16" diameter ring-terminal)
  • One 2' length of 4-gauge ground wire (terminated by a 5/8" wide, 5/16" diameter ring-terminal)
  • One 17' length of 16-gauge remote turn-on lead
  • 17' Stereo RCA patch cord
  • 40' Length of 16-gauge speaker wire
  • AFS fuse holder
  • 100A AFS fuse (installed)
  • One 7/8" self-tapping ground screw with flat washer
  • One plastic grommet
  • Four 3/16" crimp-on spade-connectors (5/16" outer width)
  • 2 Blue spade-connector sleeves
  • 2 Black spade-connector sleeves
  • Six 5" wire ties
  • One red butt-connector

Hyper-Flex Power Cable: The power, ground, and speaker wires feature a Hyper-Flex jacket for easy installation. The RCA patch cord also has a Hyper-Flex jacket. Four feet of the power wire is covered with a wire loom to protect it in the engine compartment.

Silver Tinned OFC Copper: The power and ground cables are constructed of 1862 strand silver tinned OFC copper. The speaker wire is 111 strand silver tinned OFC copper.

Fuse Holder: The fuse holder requires a 5mm Allen wrench to secure the input and output wires, and to change the fuse. There are four holes in the base for mounting and the dimensions are approximately:

  • Width: 3-1/2"
  • Height: 1-3/8"
  • Depth: 1-5/8"

Loading accessories...

Customer Q&A

1 question already asked

Q
Can use this kit with kicker amp cx300.1. I'm planing to upgrade the amp later on to a 600 rms one but for the moment I'm going to be using this 300 rms?
wforce  Apr 04, 2016
2 answers
A
Yes, if it's big enough for 600rms it will be more than enough for 300.1 .With power wiring you can't go too big. It might be a tight fit in the 300.1 power terminal. But it should be fine.
james  Apr 04, 2016
A
I've been using this kit on a 1000rms amp for over a year now and have had no issues with it.
matt  Apr 04, 2016

Loading articles...

Compare the sound