You put some good bass in your car, but now your speakers just aren't hanging with your subs. Kicker designed their KS Series component speaker systems to deliver the performance you need to bring that "live music" experience to your ride.

The KS5.2 component system features heavy-duty 5-1/4" polypropylene woofers supported by Santoprene rubber surrounds. These speakers can handle high-level playback without straining, especially when they're powered by an outboard amplifier.

Titanium 1" dome tweeters broadcast plenty of high-frequency sparkle, so you'll hear all the sonic details that make your tunes exciting. External crossovers direct the right frequencies to the tweeters and woofers for optimized performance, so you'll hear detailed, natural sound. Power these components with a nice amp, and you'll hear how these quality component speakers make your music more immediate and real.

Product Highlights:

  • component speaker system includes two 5-1/4" woofers, 2 tweeters, and 2 crossovers
  • polypropylene woofers with Santoprene™ surrounds
  • 1" titanium dome tweeters
  • flush-, angled- and surface-mount cups
  • 2-way external crossover network (12 dB/octave, 4,000 Hz high- and low-pass)
  • power range: 6-65 watts RMS (130 watts peak power)
  • frequency response: 38-21,000 Hz
  • sensitivity: 88 dB
  • woofer top-mount depth: 2"
  • warranty: 1 year
  • Our 60-day money-back guarantee

Why install component speakers?

A component speaker system gives you the best possible performance from your car audio system. A system consists of separate woofers, tweeters, and crossovers, each designed to cover one specific range of frequencies. As separate components, the woofer can move freely to deliver more powerful performance, while the tweeter can be custom-mounted in a better spot up closer to your ears, revealing a whole new world of detail. Separate crossovers are far superior to the simple filters wired into full-range speakers, so the components work together for smoother, more focused sound.

Hands-on research

What's in the box?

Download owner's manual

  • Two 5-1/4" Woofers
  • 2 Phase plugs (installed)
  • 2 Woofer grilles
  • 2 Grille mounting rings
  • Two 6x8 Adapter brackets
  • Two 1" Tweeters (each with 10" Wire attached)
  • 2 Tweeter mounting posts
  • 2 Crossovers
  • 2 Surface mount tweeter housings
  • 2 Flush mount rings (tweeter)
  • 2 Front angle rings (tweeter)
  • 2 Back angle rings (tweeter)
  • 2 Short mounting nuts (tweeter)
  • 2 Long mounting nuts (tweeter)
  • Two 10' Lengths of speaker wire (tinned wire on one end and 0.187" + 0.110" female quick slides on the other)
  • Two 10' Lengths of speaker wire (tinned wire on both ends)
  • Two 68" Lengths of speaker wire (tinned wire on both ends)
  • Twelve 1" Self-tapping screws
  • Four 1-3/4" Self-tapping screws
  • Four 5/8" Self-tapping screws
  • 16 Speed clips
  • 4 Butt connectors
  • Two 3-1/2" Zip ties
  • Owner's manual (English/ Spanish/ German/ French)

Product Research


Woofer Cones: The Kicker KS-series speakers feature durable Polypropylene woofer cones, resistant to the moisture and temperature extremes found in automotive applications.

Santoprene Surrounds: The woofer surrounds are made of Santoprene rubber to allow extended cone excursion for additional bass output and higher SPL. Santoprene is durable and resists moisture for a long life.

6x8 Adapter Bracket: For mounting flexibility, the woofer can be mounted in 6x8 applications using the supplied bracket.

Grilles: The KS5.2s come with graphite-colored, plastic, spoke-style speaker grilles.

Tweeter Mounting Options: The tweeters come with brackets to allow multiple mounting configurations; flush-mounted, angle-mounted, and surface-mounted:

  Flush Angle Surface
Mounting Height 0.322" 0.716" 1.195"
Mounting Depth 0.775" 0.631" screw depth
Frame Diameter 2.323" 2.323" 1.911"
Cutout Diameter 1.753" 1.753" N/A

Coaxial Tweeter Mount: In addition to standard tweeter mounting options, an innovative tweeter mounting post lets you mount the tweeter directly to the center of the woofer, giving you a standard coaxial speaker. When the tweeter is attached to the woofer the mounting height increases to 0.935" (top mount) and the tweeter protrusion increases to 0.677" (bottom mount).

Crossovers: The component system includes passive 2-way crossover networks for a seamless transition between the woofers and tweeters. The slope is 12dB per octave (both high pass and low pass) and the crossover point is 4000 Hz. A switch on each crossover allows you to attenuate the tweeter output; 0 dB, -4.5 dB, or -9 dB. The crossovers' dimensions are:

  • Length: 5.718"
  • Width: 3.012"
  • Height: 1.487"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Kicker KS5.2 Reviews

Average Customer Review:

6 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $500 rewards card


Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Great for high frequencies

Written By Cayle, Show Low AZ on Tuesday, July 08, 2014

Crutchfield Customer Review (What's this?)

I got these for my 91 Dodge Shadow. Great product. I recommend high note use only, don't handle low notes too well.

Pros: Great sound clear and crisp.

Cons: Don't use for low frequencies.

Great set of speakers

Written By enjid, Arizona on Thursday, April 24, 2014

Crutchfield Customer Review (What's this?)

Excellent speakers. I'm very impressed with how much I can turn these up without distortion as well. IMHO, the reproduce sounds very clearly and accurately. My only complaint is the slight 'tin-iness' they have, but I suspect this is from the Titanium woofers.

Pros: -loud/able to handle a lot of power from receiver -clear vocals and instruments -easy plug and play installation

Cons: -a little tin-iness -very limited bass range

Why did I wait so long...

Written By Lindo, Minnesota on Tuesday, February 25, 2014

Crutchfield Customer Review (What's this?)

2005 Toyota Corolla CE with stock system for 9 years = boring...Upgraded to Pioneer head unit, Alpine amp, JBL bass, and these Kicker Speakers = not boring. These speakers definitely make a huge difference. The old Toyota cardboard cone speakers (14.5W) uff da. I am hearing tones never heard before in this little car. These tweeters and midranges would definitely overpower existing lows so definitely add the subwoofer if you add these speakers. Took about 1 hour for front speakers, 2 hours for rear speakers due to all the plastic trim, seats, etc. that need to be removed in the Corolla. Crutchfield step-by-step instructions and a quick question to their advisor's (answered immediately) made this a snap. Now onto the 1997 F150 upgrade...

Pros: Simple, easy installation, crossover's easy to mount inside door panel, sound fantastic!

Cons: None yet

Good Price + Installation Options

Written By Anonymous, Colorado Springs, CO on Wednesday, September 07, 2011

Crutchfield Customer Review (What's this?)

I bought these on sale along with the 6.5" version for a 1998 Jeep XJ Cherokee. Powered by an Alpine KPT-445 they play clean and clear at any volume level. The tweeters are not harsh and the woofers provide good midrange.

Install was super simple in the stock rear headliner location by installing the tweeter in the center of the woofer like a co-axial speaker. Most component speakers require custom mounting holes for the tweeters, but these have the additional option of mounting the tweeter in the center while utilizing the factory speaker grills.

Had the option of putting the 6.5" units in the rear as well, but would have had to make modifications to the factory speaker locations. The 5.25" speakers don't provide as much mid-bass as the 6.5", but don't require any mods to install for my application. Would definitely recommend these to others.

Kicker 5.2 Component speakers

Written By Rick, Stevensville, MD on Sunday, April 24, 2011

Crutchfield Customer Review (What's this?)

I bought 2 pair of the kicker 5.2 component speakers for my 2008 F 250 crew cab along with the JL Audio 5/500 amp and a Kenwood 8" shallow mount Sub for my factory sub cabinet along with a Pioneer 4300 dvd head unit. This system absolutly rocks once you get the amp fine tuned... Thanks Crutchfield for all your help in putting my system together... You have a customer 4 life...;)))

Kicker KS5.2

Written By CJ, Buffalo, NY on Tuesday, April 05, 2011

Crutchfield Customer Review (What's this?)

Clean mids and highs that scream in the doors of my F150. Crossovers were
even easy enough to bury in the panels.

Product reviews from the Crutchfield Labs

Crutchfield writer Jo knew her factory audio system wasn't cutting it...she needed a car audio intervention. So she decided to replace her factory speakers with Kicker, and power them with a Kicker...

What are the Labs?

Get everything you’ll need to enjoy your new Kicker KS5.2

Reduce ambient road noise and your vehicle's "rattles," for better sound inside your car.
You'll need speaker wire to connect your speakers to your amp.
Keep your speakers clean and dry. They compress to fit behind your speakers.
The right tools will help keep your installation simple and clean.
Dynamat 10415 Xtreme Speaker Kit

Dynamat 10415 Xtreme Speaker Kit

Two 10-in. x 10-in. Sheets

Item #: 15410415


Add to Cart
Dynamat 10435 Xtreme Door Kit

Dynamat 10435 Xtreme Door Kit

With four 12" x 36" sheets — covers two doors

Item #: 15410435


Add to Cart
Dynamat SuperLite Tri-Pak

Dynamat SuperLite Tri-Pak

Triple package — 3 sheets, 12 square feet (Model #10612)

Item #: 15410612


Add to Cart
T-Spec 16-gauge Speaker Wire

T-Spec 16-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW16WB1


T-Spec 12-gauge Speaker Wire

T-Spec 12-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW12WB1


Stinger PRO Series Speaker Wire

Stinger PRO Series Speaker Wire

Priced per foot (16 Gauge)

Item #: 541SPW516B


XTC 5-1/4

XTC 5-1/4" Speaker Baffles

Protect your speakers (3-3/4" depth)

Item #: 237XT55


Add to Cart
Boom Mat 5-1/4-inch Speaker Baffles

Boom Mat 5-1/4-inch Speaker Baffles

Protect your speakers
Regular and slim-line sizes (Regular: 4" depth)

Item #: 696B050320


Add to Cart
Metra Crimp Tool and Connectors

Metra Crimp Tool and Connectors

Package contains crimp tool and over 150 pieces

Item #: 120CRIMPKT


Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6NGL


Add to Cart
S&G Wire Cutter/Stripper Tool

S&G Wire Cutter/Stripper Tool

Cuts and strips 12- to 22-gauge wire

Item #: 18119100


Add to Cart
S&G Tool Aid 87615

S&G Tool Aid 87615

Window and Door Clip Removal Tool

Item #: 18187615


S&G Tool Aid 87650

S&G Tool Aid 87650

Door Trim and Panel Removal Tool

Item #: 18187650


Skewdriver Pro SPK4042

Skewdriver Pro SPK4042

Ratcheting straight and offset screwdriver set with 40 bits (Skewdriver Pro with ratchet handle, pictured)

Item #: 180SPK4042


Add to Cart
Spec Tools SQR-200a Squeeze Wrench

Spec Tools SQR-200a Squeeze Wrench

Narrow space ratchet kit with 18 sockets

Item #: 180SQR200A


Add to Cart
Install Bay 3320

Install Bay 3320

Auto-ranging digital multimeter

Item #: 1203320

Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6LNGL


Add to Cart
Posi-Products™ Car Speaker Connectors

Posi-Products™ Car Speaker Connectors

8 connectors for installing car speakers

Item #: 669PP502


Add to Cart
DEI Heat Shrink Tubing

DEI Heat Shrink Tubing

Black 4-foot length (Assortment)

Item #: 696010839


Add to Cart

Questions & Answers Ask the community. Share your knowledge.

3 questions already asked

I run mine just off of my kenwood and it works fine [ STEVEN  Jun 09, 2014 ]
Yes you need a small amp my truck has one from factory built in for the on- star that's what I used good luck with them [ JUAN  Jun 04, 2014 ]
You don't need an amp at all. I run these off my stock head unit and they sound great! So you should be fine with out an amp, but having one would only make them sound even better. [ JOHNATHAN K  Jun 03, 2014 ]
I have the ix1000.1 powering a pair of these and a pair of 6.5's and they sound excellent! I always recommend amplifying midrange coaxials and components with at least 50 watts rms. [ ROY  Jun 03, 2014 ]
Hi Daniel, I have recently installed these speakers in a 2005 Toyota Corolla and they really livened up the car. They replaced the 12W paper cone stock speakers. I installed a Pioneer DEH-X8600BS head unit and did provide extra power with an Alpine KTP-445U Power Pack which provides 45W RMS x 4. I purposely stayed below the 65W RMS for the speakers to ensure they would last for awhile. Honestly, I would bump the power up to at least 45W RMS. They get plenty noisy in the Corolla and I suspect your Volvo is a little bigger. I know I wouldn't want to go down to 22W in the Toyota after hearing the Kickers with the Alpine providing the extra punch. Hope this helps. [ Kent  Jun 03, 2014 ]
Hey I have a pioneer avh-x2400bt head unit that puts out 54w per channel and have this setup with out a amp and it sounds great u might need a amp im hooking mine up to a amp soon they can take 300watts.over all very good component set [ SARA  Jun 03, 2014 ]
The radio it self is enough but the sound quality is going to be lacking since the component setup. For optimal performance an amp is always suggested but not required [ STEVEN  Jun 03, 2014 ]
My kenwood puts out 50 watts per channel and that gives me 100 db output so it's really a personal preference of how loud you want it to be. But I would if I were you [ clifford  Jun 02, 2014 ]
I was told not to run them unless you had at least 50 watts per speaker. I had them under powered and they blew. So I would recommend getting an amp to power them. [ DALE  Jun 02, 2014 ]
If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can walk you through the install. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer. You can also post your question in our forums: Or try our online support center: [ Krissy  May 26, 2014 ]  Staff
This will depend largely on your vehicle. For recommendations please contact an Advisor by phone (1-800-324-9695) or online chat. [ Jeff  Jan 20, 2014 ]  Staff