Skip Navigation

Kicker PK4

4-gauge amplifier power wiring kit

3 Reviews | 2 questions - 2 answers

Watch a product review

Add to Cart

Kicker PK4

Overview

Our take on the Kicker PK4

Your amplifier needs hefty power and ground wiring in order to deliver the big power you want. Kicker's PK4 4-gauge power wiring kit includes the basic power, ground, and turn-on wiring for any amplifier with a fuse rating of up to 100 amperes. The kit is suitable for an amplifier or amp system with a total maximum output of about 650 watts RMS for Class AB amps or about 1000 watts RMS for Class D amps. Kicker makes all their wires from oxygen-free copper so you can count on maximum power and signal transfer with minimum resistance or interference.

This wiring kit does not include speaker wire or patch cables. You will need to purchase those separately, in order to complete your amplifier installation.

This kit delivers all the power your amp needs

Your amplifier needs hefty power and ground wiring in order to deliver the big power you want. Kicker's PK4 4-gauge power wiring kit includes the basic power, ground, and turn-on wiring for any amplifier with a fuse rating of up to 100 amperes. The kit is suitable for an amplifier or amp system with a total maximum output of about 650 watts RMS for Class AB amps or about 1000 watts RMS for Class D amps. Kicker makes all their wires from oxygen-free copper so you can count on maximum power and signal transfer with minimum resistance or interference.

This wire is great. Just as good as copper but extremely flexible

joshua, Elizabethtown, KY

Featured Video:

What's in the Box:

  • 17' Length of 4-gauge power wire terminated with a 5/16" ring-terminal on one end (blue/black jacket)
  • 2' Length of 4-gauge ground wire terminated with a 5/16" ring-terminal on one end (dark gray jacket)
  • 17' Length of 16-gauge remote turn-on wire (clear jacket)
  • AFS fuse holder
  • 100 amp AFS fuse (installed)
  • One 7/8" Self-tapping screw (ground)
  • 1 Flat washer
  • 1 Plastic grommet
  • 1 Red butt-connector
  • Six 5" wire ties

Product Highlights:

  • amplifier wiring kit
  • cables meet or exceed the American Wire Gauge specifications and requirements
  • 17 feet of 4-gauge power cable with attached ring terminal and protective wire loom — blue
  • 2 feet of 4-gauge ground cable with attached ring terminal — gray
  • 17 feet of 16-gauge turn-on lead wire — clear
  • AFS fuse holder and 100-amp fuse
  • assortment of installation hardware and cable ties
  • extends your Kicker amplifier's warranty by one year, if purchased along with the amp
  • warranty: 1 year
  • Our 60-day money-back guarantee
Reviews

Kicker PK4 Reviews

Average Customer Review:

3 Reviews

Quality

Written by: Ian from Minneapolis, MN on July 18, 2016

Crutchfield Customer Review (What's this?)

High quality amp install kit with 4 AWG power wire and 100 amp fuse. Shrink tubing protects the spot where the fuse box is to be installed. The ring terminals come pre-installed with shrink tubing. Approximately 6' of the power wire has braided polyester sleeve to protect it in the engine compartment.

Pros: High quality. Extra touches give professional look for durable install.

Cons:

Excellent wiring kit

Written by: joshua from Elizabethtown, KY on June 18, 2016

Crutchfield Customer Review (What's this?)

This wire is great. Just as good as copper but extremely flexible

Pros: Flexability

Cons:

Super Quality

Written by: Anonymous from Ohio on December 21, 2014

Crutchfield Customer Review (What's this?)

I have bought a number of wiring kits over the years and this has, by far, been the best quality. Everything is way overkill and meant to last 10 lifetimes. I will only buy kicker wiring kits from now on.

Pros: Super high quality. Nice neutral colors.

Cons: The only bad this is I wish the hole on the ground wire terminal was a little bigger. Not a huge issue As I just cut it and secured it under a bolt. Its not going anywhere.

Details

Hands-on research

What's in the box?

  • 17' Length of 4-gauge power wire terminated with a 5/16" ring-terminal on one end (blue/black jacket)
  • 2' Length of 4-gauge ground wire terminated with a 5/16" ring-terminal on one end (dark gray jacket)
  • 17' Length of 16-gauge remote turn-on wire (clear jacket)
  • AFS fuse holder
  • 100 amp AFS fuse (installed)
  • One 7/8" Self-tapping screw (ground)
  • 1 Flat washer
  • 1 Plastic grommet
  • 1 Red butt-connector
  • Six 5" wire ties

Product Research

Features

Single Amplifier 4-AWG Kit: This kit includes the following:

  • One 17' length of 4-gauge power wire (terminated by a 5/8" wide, 5/16" diameter ring-terminal)
  • One 2' length of 4-gauge ground wire (terminated by a 5/8" wide, 5/16" diameter ring-terminal)
  • One 17' length of 16-gauge remote turn-on lead
  • AFS fuse holder
  • 100A AFS fuse (installed)
  • One 7/8" self-tapping ground screw with flat washer
  • One plastic grommet
  • Six 5" wire ties
  • One red butt-connector

Hyper-Flex Power Cable: The power and ground cables feature a Hyper-Flex jacket for easy installation. Four feet of the power wire is covered with a wire loom to protect it in the engine compartment.

Silver Tinned OFC Copper: The power and ground cables are constructed of 1862 strand silver tinned OFC copper.

Fuse Holder: The fuse holder requires a 5mm Allen wrench to secure the input and output wires, and to change the fuse. There are four holes in the base for mounting and the dimensions are approximately:

  • Width: 3-1/2"
  • Height: 1-3/8"
  • Depth: 1-5/8"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Staff Reviews

Product reviews from the Crutchfield Labs

Top-quality power wire is key to getting the best performance out of your amplifier. Kicker power wire transfers power efficiently to your amp for best performance.

What are the Labs?
Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

I call this using the right tool for the right job... I want the best performance I can get in installing stereo equipment with safety in mind. [ JESSE  Jul 04, 2016 ]
Quality [ Mark  Mar 23, 2016 ]
i love kicker stuff and it was much cheaper here also had a scratch and dent option nice [ Thomas Parker  Feb 08, 2016 ]
Has almost everything I needed in one kit. Kicker branded wire is probably the same as any other. [ Bryan  Dec 29, 2015 ]

2 questions already asked

works as well or better than I hoped. I know you want to get it right. My whole system Crutchfield recomended for my ram crew cab could not be better. I was very pleased when I cranked it up. [ JAMES S  Jan 08, 2016 ]
The kit is suitable for an amplifier or amp system with a total maximum output of about 650 watts RMS for Class AB amps or about 1000 watts RMS for Class D amps. [ Keith  Dec 31, 2014 ]
Library

Searches related to the Kicker PK4 4-gauge amplifier power wiring kit