Chat
Contact us
Close contact box
Connect ID #
663 586 387 4
Connect ID #
663 586 387 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Kicker PKD4 4-gauge dual amplifier power wiring kit

Item # 206PKD4

Your amplifiers need hefty power and ground wiring wiring in order to deliver the big power you want.

Your amplifiers need hefty power and ground wiring wiring in order to deliver the big power you want.

California customers:
Please click here for your Proposition 65 warning.

Item # 206PKD4

About the Kicker PKD4

Buck Pomerantz

This kit delivers all the power your multi-amp system needs

Your amplifiers need hefty power and ground wiring wiring in order to deliver the big power you want. Kicker's PKD4 multi-amp wiring kit includes the basic power, ground, and turn-on wiring for any amp system with a total fuse rating of up to 100 amperes. This kit is suitable for a system with a total output of about 650 watts RMS for Class AB amps or about 1000 watts RMS for Class D amps.

This wiring kit does not include speaker wire or patch cables. You will need to purchase those separately, in order to complete your amplifier installation.

This kit delivers all the power your multi-amp system needs

Your amplifiers need hefty power and ground wiring wiring in order to deliver the big power you want. Kicker's PKD4 multi-amp wiring kit includes the basic power, ground, and turn-on wiring for any amp system with a total fuse rating of up to 100 amperes. This kit is suitable for a system with a total output of about 650 watts RMS for Class AB amps or about 1000 watts RMS for Class D amps.

The kit includes a 17-foot 4-gauge power wire that runs from your battery to the included distribution block, along with a 4-foot length of 8-gauge wire that'll readily accommodate two amplifiers. Kicker makes all their wires from oxygen-free copper so you can count on maximum power and signal transfer with minimum resistance or interference.

The PKD4 kit also includes Kicker's DB4 power distribution block, which takes the 4-gauge input and sends it to four outputs (4- to 8-gauge) — you can power up to four amplifiers with the one main power cable that runs from your battery. The DB4 block features a second 1/0- to 8-gauge input so you can daisy-chain another distribution block or amplifier into your system, if you want to expand later.

READ LESS

Product highlights:

  • multi-amplifier power wiring kit
  • cables meet or exceed the American Wire Gauge specifications and requirements
  • 17 feet of 4-gauge power cable with attached ring terminal and protective wire loom — blue
  • 4 feet of 8-gauge ground cable with attached ring terminals — gray
  • 4 feet of 8-gauge power cable — blue
  • 17 feet of 16-gauge turn-on lead wire — clear
  • Kicker DB4 distribution block — two 1/0- to 8-gauge inputs, four 4- to 8-gauge outputs
  • AFS fuse holder and 100-amp fuse
  • assortment of installation hardware and cable ties
  • extends a Kicker amplifier's warranty by one year, if purchased along with the amp
  • warranty: 1 year
  • MFR # PKD4

What's in the box:

  • 17' Length of 4-gauge power wire terminated with a 5/16" ring-terminal on one end (blue/black jacket)
  • 4' Length of 8-gauge ground wire terminated on both ends with 5/16" ring-terminals (dark gray jacket)
  • 4' Length of 8-gauge power wire (blue jacket)
  • 17' Length of 16-gauge remote turn-on wire (clear jacket)
  • AFS fuse holder
  • 100 amp AFS fuse (installed)
  • Power distribution block
  • Two 7/8" Self-tapping screws (ground)
  • 2 Flat washers
  • 1 Plastic grommet
  • 1 Red butt-connector
  • Six 5" wire ties

Featured video:

Customer reviews for Kicker PKD4

Loading reviews...

Average review:

5.0 out of 5 stars
3 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Kicker PKD4

Mark G.

Product Research

Features

Dual Amplifier 4-AWG Kit: This kit includes the following:

  • One 17' length of 4-gauge power wire (terminated on one end by a 5/8" wide, 5/16" diameter ring-terminal)
  • One 4' length of 8-gauge ground wire (terminated on both ends by a 1/2" wide, 5/16" diameter ring-terminal); this wire will be cut into two pieces, each with a ring terminal on one end, to supply ground wires for two amps
  • One 4' length of 8-gauge power wire; this wire will be cut into two pieces to supply power wires for two amps (connected between the distribution block and the amps)
  • One 17' length of 16-gauge remote turn-on lead
  • AFS fuse holder
  • 100A AFS fuse (installed)
  • One power distribution block with two ports for up to 1/0-gauge wire and four ports for up to 4-gauge wire; all six ports are shorted together, so any combination of them can be used
  • Two 7/8" self-tapping ground screws with flat washers
  • One plastic grommet
  • Six 5" wire ties
  • One red butt-connector

Hyper-Flex Power Cable: The power and ground wires feature Hyper-Flex jackets for easy installation. Four feet of the power wire is covered with a wire loom to protect it in the engine compartment.

Silver Tinned OFC Copper: The power and ground cables are silver tinned OFC copper. The 4-gauge is 1862 strand wire, the 8-gauge is 735 strand wire.

Fuse Holder: The fuse holder requires a 5mm Allen wrench to secure the input and output wires, and to change the fuse. There are four holes in the base for mounting and the dimensions are approximately:

  • Width: 3-1/2" (without adding for the wires)
  • Height: 1-3/8"
  • Depth: 1-5/8"

Distribution Block: The power distribution block has two 1/0-gauge inputs and four 4-gauge outputs. Each port will also accommodate smaller wire (smaller that 8-gauge not recommended). All six ports are shorted together, so any combination of them can be used. The dimensions are approximately:

  • Width: 2-3/4"
  • Height: 1-1/4"
  • Depth: 1-7/8" (without adding for the wires)

Loading accessories...

Customer Q&A

Loading articles...

Compare the sound