Kicker 12PX200.1

Mono subwoofer amplifier — 200 watts RMS x 1 at 1/2 ohm

Item #: 206PX2K1

In Stock

7 Reviews | Ask Questions

Your price: $169.99 Earn up to 170 Rewards points

Add to Cart Free Shipping Lifetime Tech Support

+ Add to wishlist + Email me alerts for this product

Scratch & Dent: $144.49

View all associated offers

Bring the music outside

Kicker designed the PX200.1 subwoofer amp to work in your powersports vehicle, boat, motorcycle, ATV, golf cart, tractor, or any other vehicle using a 12-volt charging system. This weather-resistant music maker fits in the palm of your hand — or on the fairing of your bike — delivering up to 200 watts RMS to your subs, so you can hear the bass clearly as you work or play outside.

Efficient and optimized for low-impedance subs

The PX200.1 employs Kicker's Direct Amp Technology™, using the vehicle's electrical system as its power supply so this bantamweight amp will run cool even while you're pushing it hard and loud. Kicker recommends the PX200.1 for driving one or two CompVT 6.5" 1-ohm subwoofers.

Product Highlights:

  • mono subwoofer amplifier (works in any vehicle with a 12-volt charging system)
  • 100 watts RMS x 1 at 1 ohms (200 watts RMS x 1 at 0.5 ohms)
  • Direct Amp Technology results in 90% efficiency
  • switchable low-pass filter (100 Hz, 250 Hz at 24 dB/octave)
  • selectable bass boost (0, 6 dB at 60 Hz)
  • fixed subsonic filter (40 Hz, 24 dB/octave)
  • preamp and speaker-level inputs (speaker-level input requires an optional adapter)
  • 14-gauge power and ground leads recommended — wiring and hardware not included with amplifier
  • fuse rating: 15A x 1
  • 5"W x 2-1/16"H x 3-1/2"D
  • warranty: 2 years
  • Our 60-day money-back guarantee

My system has plenty of power. Who needs an amp?

You might think you don't need an amp because you have a 400-watt system in your car, or because your new stereo puts out 50 watts a channel. But those are peak wattage ratings, which may boil down to 15 or 20 watts per channel, using the more realistic RMS rating. An amp sends your speakers the power they need to deliver your music with clarity and impact, whether you're using factory speakers or high-performance components. And low-frequency reproduction requires lots of power, so an amp is an absolute must if you're adding a sub to your system.

Hands-on research

What's in the box?

Download owner's manual

  • Mono amplifier
  • 12" Input/Output harness
  • In-line fuse holder
  • One 15-amp ATO fuse (installed)
  • Four 1" Self-tapping screws
  • Two 14-16 Gauge crimp-on ring terminals
  • Two 11-1/2" Zip-ties
  • Owner's manual (English/ Spanish/ German/ French)

Product Research

Features

Overview: PX series amplifiers are designed for motorized vehicles with small battery/charging systems; Kicker's new Direct Amp Technology uses the vehicle's charging system as its power supply, offering 90-percent efficiency. As a result, the PX200.1 draws a maximum of less than 15 amps and outputs solid power without taxing the limited charging capacity found on motorcycles, utility or other vehicles. Little ventilation is required and with its small footprint, the PX200.1 can be installed in motorcycle saddle bags or fairings, glove compartments, or other small spaces.

Power Output: The PX200.1 is a mono amplifier designed to power one or two CVT651 1Ω, 6-3/4" subwoofers. The power output is 100 watts RMS at 1Ω (<1% THD+N) and 200 watts RMS at 0.5Ω (< 10% THD+N).

Controls: The controls are under a rubber cover:

  • Low Pass Crossover: 100 Hz or 250 Hz; low pass crossover cannot be bypassed
  • Bass Boost: on/off; 6 dB boost centered at 60 Hz
  • Input Level: select high (speaker level) or low (line level)
  • Auto Turn-on: select 12V (amp turns on when +12 volts is applied to the remote wire in the harness) or DC (amp turns on when a 6 volt surge is detected from a speaker level source)
  • Gain: rotary knob; adjust to match the output of the source unit

Wiring: All the wiring connections are in one Molex plug (power, ground, remote turn-on, speaker output, RCA input).

Speaker Level Input: When connecting a speaker level source, cut the RCA plugs off and splice into the remaining wire. If you prefer not cutting the RCA plugs off, use the Kicker KiSL speaker level to RCA adapter (item number 206KiSL, sold separately).

Differential Input: The differential input circuit reduces the likelihood of picking up any engine noise.

Subsonic Filter: The PX200.1 includes a 24 dB/octave subsonic filter, fixed at 40 hertz.

Weather Resistant: The PX Amps are weather-resistant, using a conformal-coated circuit board for protection against the elements. They also include stainless-steel mounting hardware.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Kicker 12PX200.1 Reviews

Average Customer Review:

7 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $500 rewards card

(0)
(0)
(0)
(0)
(0)

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Unique market amp

Written By BenE, Anchorage, AK on Tuesday, November 11, 2014

Crutchfield Customer Review (What's this?)

This amp was purchase to power a factory sub which is does quite well. If I were to do this over however, I would order the amp and the sub, as the factory paper is worthless over 10 watts. Don't waste your time, replace both.

Pros: Super easy install as it can tap into factory deck wiring for power. RCA inputs for clean signal and deck cross-over use, very tiny - easy to hide. Well built.

Cons: This is a MONO only amp, power rating is rated at 100Watts - @ 1 Ohm which is misleading. This is closer to a 40W amp when used on a 4 Ohm speaker.

Kicker Amp

Written By Vince, BOise, ID on Monday, May 19, 2014

Crutchfield Customer Review (What's this?)

Amp is compact and easy to install. High output from a small package.Senses sound so no need to run remote on from deck.

Pros: Amp is compact and easy to install. High output from a small package. Senses sound so no need to run remote wire from deck.

AWESOME if you use it right

Written By Coreshot, Boulder, CO on Thursday, April 03, 2014

Crutchfield Customer Review (What's this?)

Installed one month ago into an Audi A6 Avant.

Before buying this, you have to realize what it's for- it's for driving the Kicker 40CWRT671 at 1/2 ohm (1 ohm DVC). Don't expect to drive anything that needs more power, even just the 8 inch. That being said, It's fantastic for its niche- sends plenty of power, and is only fused for 15 amps- your car's electrical system won't even know it's there, and you don't even need to buy an amp power kit if you install it right.

Pros: 1/2 ohm stable, super low draw on electrical system- AMAZING output for 15 amps

Cons: My only gripe- given that it's 100% designed to drive this one specific speaker, having the preset crossover set at 100 hz makes zero sense- 120 or 150 would have been much better. Any decent aftermarket deck will have this, but if you want to run it with your stock deck it's poorly thought out.

Compact little amp

Written By Julio, Lynchburg, VA on Sunday, September 29, 2013

Crutchfield Customer Review (What's this?)

It does what It was design for, but in my case was not enough. I was looking to have more sound depth and this amp couldn't do it.

Pros: Small, compact. I see this amp adequate for small vehicles.

Cons: Not enough for a regular size sedan.

Unit is perfect size for installation where space is a concern

Written By Grant, Traverse City,Michigan on Saturday, August 10, 2013

Crutchfield Customer Review (What's this?)

Unit fit on top of the dash substructure on my polaris RZR

Pros: Great fit and finish

Cons: Unfortunately this was an open box purchase and the unit was bad out of the box. Crutchfield offered to make good on the purchase but do to time constraints I needed to purchase an comparable unit from my installer.

Good things come in small packages

Written By Boz, Blue Ridge Summit, PA on Tuesday, May 21, 2013

Crutchfield Customer Review (What's this?)

I'm using this amp to drive the Kicker 6.5 subwoofer. It is more than adequate and its super compact size is just what I needed for my installation.

Pros: Powerful enough, extremely compact, ease of installation.

Cons: none

PX200.1

Written By Ryan P, Houston, TX on Monday, April 23, 2012

Crutchfield Customer Review (What's this?)

This product is everything that I was expecting. I installed this along with the CVT651 sub and PXi 50.2 amp, and PS5250 speakers on a 2012 Seadoo Wake Pro Watercraft. The sound is amazing and very clear. Very loud also. The amp draw is small enough that I didn't need to add or upgrade a battery.

Pros: Sound quality, size, easy install and easy to use.

Cons: I wish this has easier control of the sub gain.

Get everything you’ll need to enjoy your new Kicker 12PX200.1

You'll need an amp wiring kit to install your new amplifier, as wiring is not included.
Patch cables take the music from your stereo to the amplifier. Most amp wiring kits don't include them.
Bring the music from your amp to your speakers.
The right tools will make the installation easier.
Have your new amplifier put in by a qualified professional in your area.
Install Bay IBR38

Install Bay IBR38

12-gauge power and ground wire (20 feet red, 10 feet black)

Item #: 120IBR38

EFX PA10BX Wiring Kit

EFX PA10BX Wiring Kit

10-gauge amplifier wiring kit — includes 2-channel patch cable

Item #: 142PA10BX

(7)

$29.99
Add to Cart
Rockford Fosgate RFK10i

Rockford Fosgate RFK10i

10-gauge amplifier power and signal wiring kit

Item #: 575RFK101

(41)

$49.99
Add to Cart
Rockford Fosgate RFK10

Rockford Fosgate RFK10

10-gauge amplifier power wiring kit

Item #: 575RFK10

(40)

$29.99
Add to Cart
Posi-Products™ Fuse Holder Kit

Posi-Products™ Fuse Holder Kit

2 blade fuse holders

Item #: 669PP618

(1)

T-Spec 2-Channel RCA Patch Cables

T-Spec 2-Channel RCA Patch Cables

Available in 7 different lengths (1.5-foot)

Item #: 120RCA152

(27)

$9.99
Add to Cart
EFX 17-foot RCA Patch Cable

EFX 17-foot RCA Patch Cable

Item #: 142A17C

(55)

$7.99
After $2.00 Savings Add to Cart
Kicker KISL

Kicker KISL

2-channel speaker wire adapter (bare-wire connector to RCAs)

Item #: 206KISL

(14)

$12.99
Add to Cart
EFX 2-Channel RCA Patch Cables

EFX 2-Channel RCA Patch Cables

Core Series Twisted RCA patch cables — available in 5 different lengths (3-foot)

Item #: 142RCT3B

$6.95
Add to Cart
EFX 2-Channel RCA Patch Cables

EFX 2-Channel RCA Patch Cables

Elite Series Braided Multi-Core RCA patch cables — available in 5 different lengths (17-foot)

Item #: 142RE17

$74.95
Add to Cart
EFX 2-Channel RCA Patch Cables

EFX 2-Channel RCA Patch Cables

Reference Series Multi-Core RCA patch cables — available in 5 different lengths (12-foot)

Item #: 142RR12

$19.95
Add to Cart
T-Spec 16-gauge Speaker Wire

T-Spec 16-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW16WB1

(13)

Stinger PRO Series Speaker Wire

Stinger PRO Series Speaker Wire

Priced per foot (16 Gauge)

Item #: 541SPW516B

(52)

$0.39
Add to Cart
T-Spec 12-gauge Speaker Wire

T-Spec 12-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW12WB1

(30)

S&G Wire Cutter/Stripper Tool

S&G Wire Cutter/Stripper Tool

Cuts and strips 12- to 22-gauge wire

Item #: 18119100

(17)

$19.99
Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 3 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR3NGL

(183)

$11.99
Add to Cart
Pro.Fit Wire Worm

Pro.Fit Wire Worm

Installation tool helps route wiring through tight spaces

Item #: 042DM4533

(34)

$12.99
Add to Cart
Install Bay IB35400

Install Bay IB35400

Premium door panel and trim tool

Item #: 12035400

$15.99
Add to Cart
Metra Crimp Tool and Connectors

Metra Crimp Tool and Connectors

Package contains crimp tool and over 150 pieces

Item #: 120CRIMPKT

(15)

$19.99
Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6LNGL

(2)

$29.99
Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6NGL

(53)

$24.99
Add to Cart
S&G Tool Aid 87650

S&G Tool Aid 87650

Door Trim and Panel Removal Tool

Item #: 18187650

(71)

Skewdriver Pro SPK4042

Skewdriver Pro SPK4042

Ratcheting straight and offset screwdriver set with 40 bits (Skewdriver Pro with ratchet handle, pictured)

Item #: 180SPK4042

(8)

$49.99
Add to Cart
Install Bay 3320

Install Bay 3320

Auto-ranging digital multimeter

Item #: 1203320

$39.99
Add to Cart
DEI Heat Shrink Tubing

DEI Heat Shrink Tubing

Black 4-foot length (Assortment)

Item #: 696010839

(8)

$24.99
Add to Cart
InstallCard: Amp or Equalizer

InstallCard: Amp or Equalizer

Prepaid professional amplifier or EQ installation

Item #: 597421003

(18)

$79.99
Add to Cart

Questions & Answers Ask the community. Share your knowledge.