About the Kicker 40PXIBT50.2
Tough and versatile
Tough and versatile
Kicker's 40PXIBT50.2 2-channel amp can add music to just about any vehicle with a 12-volt electrical system. This compact, water-resistant amp can be installed on many types of ATVs, motorcycles, tractors, and riding mowers — we even installed one in a cooler. For its small size, the 40PXIBT50.2 gives you up to 25 watts RMS per channel to drive a wide variety of speakers, including Kicker's PS52504 multipurpose speakers. You'll also get a pair of preamp outputs, in case you need another amp for a subwoofer or more speakers.
Even more adaptability
This little Kicker features built-in Bluetooth for wireless audio streaming and an auxiliary input, so you can enjoy music from various devices. If you want to go wireless, you can stream your tunes from your compatible Bluetooth device or smartphone. You can also plug almost any player into the auxiliary input.
Don't worry about controlling your music from your player's touchscreen — the included back-lit wired remote lets you control your music, while your connected device can be conveniently tucked away. You can also charge various devices by using the 5-volt USB port included on the amplifier.
Product highlights:
- 2-channel amplifier/controller with Bluetooth
- 15 watts RMS x 2 at 4 ohms (25 watts RMS x 2 at 2 ohms)
- works in any vehicle with a 12-volt charging system
- 5-volt USB input for charging portable devices
- auxiliary input and outputs
- back-lit blue LED wired remote with large rubber buttons
- weather-resistant
- 12-gauge power and ground wires and a 10-amp in-line fuse recommended
- amp: 6-1/8"W x 2-1/8"H x 3-5/8"D
- warranty: 2 years
- MFR # 40PXIBT502
What's in the box:
Kicker 40PXIBT50.2 owner's manual
- 2-Channel amplified controller for Bluetooth devices
- Wired remote/controller with attached 5.5' cable
- Plastic mounting bracket for wired remote/controller
- Handlebar mounting clamp
- Wiring harness with power/ ground/ aux input/ remote input/ preamp output
- Four 5/8" Pan-washer screws
- 4 Split lock washers
- Four 1/4" Pan-head screws
- Instructions
Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Customer reviews for Kicker 40PXIBT50.2
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kicker 40PXIBT50.2
Features & specs
Performance | ||
---|---|---|
RMS Power Output (Watts x Channels) |
15 x 2 | |
Peak Power Output (Watts x Channels) | --- | |
Power at 2 Ohms (Watts x Channels) | 25 x 2 | |
Power at 1 Ohm (Watts x Channels) | --- | |
Bridged Power (Watts x Channels) | N/A | |
Minimum Impedance Bridged | --- | |
Minimum Impedance Unbridged | 2 | |
Minimum Impedance | 2 | |
Best Frequency Response | 20-20k Hz | |
THD at Rated RMS Power | --- | |
Signal to Noise Ratio | 90 dB | |
Input Voltage | --- | |
Features | ||
Amplifier Class | Not Given | |
Low-Pass Crossover Frequency | N/A | |
Low-Pass Slope (dB/octave) | N/A | |
High-Pass Crossover Frequency | N/A | |
High-Pass Slope (dB/octave) | N/A | |
Bass Boost | No | |
Bass Boost Frequency | N/A | |
Fan Cooled | No | |
Fuse Rating | 10 | |
Speaker Level Inputs | --- | |
Preamp Outputs | 1 pair | |
Width (inches) | 6-1/8 | |
Height (inches) | 2-1/8 | |
Depth (inches) | 3-5/8 | |
Parts Warranty | 2 Years | |
Labor Warranty | 2 Years |
Product Research
Features
Overview: The Kicker PXiBT50.2 is a simple 2-channel amplifier that allows you to listen to your Bluetooth device in a vehicle without a built-in music source. This Amplified Controller can be installed in boats, ATVs, utility vehicles, golf carts, tractors, snowmobiles, hot rods, motorcycles, and riding lawnmowers. The unit also provides a 5-volt/1-amp USB port to power and charge your source.
Components: The PXiBT50.2 consists of the following components:
- Amplifier: a small 2-channel amp with a weather-resistant cover
- Remote Controller: the 6-button wired remote is weather-resistant and backlit in blue; the attached cable is 5.5 feet long; it can be flush-mounted using the included bracket, mounted to a pipe or handlebars (1.5" diameter max) with the included clamp-type mount, or surface mounted using adhesive or Velcro (not included)
- Wiring Harness:
- Power/Speaker Output: 24" wires for constant power (with 10 amp in-line fuse), switched power, ground, remote output (to turn on an outboard amp), right and left speaker output
- Preamp Output: 8" stereo RCA outputs (female)
- Aux Input: 3.5mm mini-jack aux input on 9" pigtail
- Remote: 3.5mm mini-jack wired remote input on 9" pigtail
- Illumination: 11" remote illumination wire
Remote Controller: The 6-button wired remote offers control of your Bluetooth connected player; power on/off, raise/lower the volume, next/previous track, and play/pause the track. The dimensions vary with mounting method:
- Flush Mounting Bracket:
- Width: 3-7/8"
- Height: 1-7/8"
- Mounting Height (protrusion): 3/8"
- Depth (into mounting surface): 3/4"
- Handlebar Clamp:
- Width: 3-3/16"
- Height: 1-5/8"
- Depth: 1-1/4"
Additional Input/Output: In addition to the Bluetooth connection, the PXiBT50.2 has a 3.5mm auxiliary input for adding an additional source, such as a portable CD or satellite radio. There is also a pair of stereo RCA preamp outputs for use with additional amplifiers.
Specifications:
- Power Output: 15 watts RMS x 2 (4 ohms); 25 watts RMS x 2 (2 ohms)
- Frequency Response: 20Hz - 20kHz (+/- 1dB)
- RCA Output Voltage: 2.5V RMS
- Signal-to-Noise Ratio: 90dB
- Max Current Draw: 10A
- Aux-Input Sensitivity: 500mV to 1.75V
- USB Charging: 5V @ 1A
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...