About the Terk Mini Modulator
Trying to hook up a new DVD player, game console, or camcorder to a TV that only has an antenna jack? Terk's Mini Modulator is what you need. This compact, affordable modulator accepts the audio/video signal from your source component and converts it to RF for use with older TV sets. Hook up your cable TV or off-air antenna feed via the provided coaxial RF input; then, to select your connected A/V component, just turn it on auto source switching does the rest.
The Mini Modulator can be wall- or cabinet-mounted for neat, out-of-the way installation.
Details:
- 1 A/V input (composite video and RCA stereo audio)
- 1 coaxial RF input (for cable or off-air antenna feed)
- 1 coaxial RF output (for connecting to TV)
- channel 3/4 switch
- wall-mountable
- mono audio output
- 3-1/4"W x 4-5/16"H x 1-1/2"D
- warranty: 1 year
What's in the box:
Terk Mini Modulator owner's manual
- RF Modulator
- AC adapter with attached 76" power cord (Output: 9 Volts DC/100mA/Tip +)
- Product brochure
- Instructions (on back of packaging)
Customer reviews for Terk Mini Modulator
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Terk Mini Modulator
Product Research
Features
Inputs and Outputs Notes
Specifications
Features
Overview: The Terk Mini Modulator can be used to convert a composite (RCA) video and RCA stereo audio signals to an RF signal that can be used on a television which does not have line level inputs. This allows you to connect a source such as a DVD Player or Camcorder (which normally do not have RF outputs) to a television which only has an RF (Coax) input. The audio output by this modulator is mono, and there are no connecting cables supplied with the unit.
Automatic Source Switching: When you turn on the power of the connected video source, the Mini Modulator will automatically switch from the cable or antenna input to the video source as soon as it receives a signal from the source.
Channel 3/4 Switch: The unit has a Channel 3/4 switch on the top, located between the Coax input and output jacks. This switch is used to select either channel 3 or 4 to view the modulator's output on the television . To view the source connected to the RF modulator, the television must be set to the same channel as the switch.
Mounting Options: The modulator can be mounted on a wall or cabinet by using the two keyhole slots on the back of the unit. There is also double-stick tape attached just below the keyhole slots. This tape can be used alone, or with the keyhole slots for mounting purposes.
Inputs and Outputs Notes
Inputs:
-
Antenna Input: Threaded coax jack on the top of the unit for connecting a 75-ohm coaxial cable from the output of a cable box or indoor/outdoor antenna.
-
A/V Input: Composite video input (RCA) jack and stereo RCA audio inputs on the bottom of the unit for connecting the source component (DVD, Camcorder, Satellite Receiver).
-
DC Input: Input for supplied AC adapter.
Outputs:
-
Output To TV: Threaded coax jack on the top of the unit for connecting a 75-ohm coaxial cable to the TV's antenna input.
Specifications
Specifications:
- Video Carrier Output Level: 60 - 69.5 dB uV
- RF Output Channels: 3 or 4
- RF Output Impedance: 75 ohms
- Audio Input Impedance: 13 + 3K ohms
- AC Adapter:
- Input: 120 Volts AC/60Hz
- Output: 9 Volts DC/100mA
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...