About the Morel 38 Limited Edition
Enhanced detail
Enhanced detail
Morel's 38th Anniversary Limited Edition 6-1/2" 3-way component system adds a midrange driver for a fuller, more palpable response and enhanced sonic detail. A carbon fiber woofer cone delivers the lows with assurance while a separate silk dome tweeter handles the higher frequencies. The woofer handles up to 140 watts RMS, thanks to a superbly engineered motor structure built around a 3" voice coil. The tweeter sports a machined aluminum face plate for a cool, powerful look, and, like the midrange driver, Morel coats the silk dome with their one-of-a-kind Acuflex™ compound which enhances damping for more accurate highs.
This Morel 3-way system comes in a cool carrying case.
High-quality crossover network
The innovation doesn't stop there — technologies like the woofer's Uniflow Air Chassis and EVC voice coil design keep efficiency high and heat build-up low for optimal performance play after play. And Morel built the high-quality crossover with select handmade components to ensure that you hear an incredibly lifelike reproduction of the performance in your vehicle.
Handmade quality you can count on
Morel was founded in 1975 with a singular mission to build speakers that can recreate the depth and detail of a live performance from a recording. And oh, how they've succeeded. Even in spite of the limitations that the automotive environment poses, Morel's car speakers soar. Every bit of that excellence is due to their passion for sound and their insistence that every Morel speaker be made by hand and tested to meet their premium standards.
Product highlights:
- component speaker system includes two 6-1/2" woofers, two midrange drivers, two tweeters, two external crossovers, two woofer grilles
- triple layer carbon fiber/Rohacell sandwich woofer cone with butyl rubber surround
- 3" voice coil
- titanium former
- aluminum voice coil wire
- cast aluminum basket
- midrange driver and silk dome tweeter
- Acuflex coating for superior damping
- machined aluminum face plate
- external crossover with 3 tweeter level settings
- handles up to 140 watts RMS (600 watts peak power)
- frequency response: 49-20,000 Hz
- sensitivity: 88 dB at 2.83 V
- woofer mounting depth: 2-7/16"
- grilles included
- warranty: 1 year
- MFR # 350498-200
What's in the box:
Morel 38 Limited Edition owner's manual
- 2 Woofers
- 2 Midrange (with attached 9" length of wire)
- 2 Tweeters (with attached 9" length of wire)
- 2 Crossovers
- 2 Lotus style woofer grilles (installed)
- 2 Lotus style midrange grilles (installed)
- 2 Lotus style tweeter grilles (installed)
- 2mm Allen wrench
- Eight 1-1/4" Screws
- Twenty-two 3/4" Screws
- 24 Speed clips
- Grille putty
- Eight 0.25" Crimp-on female quick slides
- Four 0.110" Crimp-on female quick slides
- User guide
- Morel window sticker
- Genuine product verification instructions
Customer reviews for Morel 38 Limited Edition
Loading...
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Morel 38 Limited Edition
Features & specs
General | ||
---|---|---|
Speaker Size | 6 1/2 | |
Design | 3-way | |
Tweeter Design | 28mm Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Silk | |
Woofer Composition | Carbon/Rohacell Sandwich | |
Woofer Surround | Rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | N/A | |
Sensitivity at 2.83 volts | 88 | |
Frequency Response | 49 - 25k Hz | |
Minimum RMS Wattage | --- | |
Maximum RMS Wattage | 140 | |
Peak Power Handling (Watts) | 600 | |
Top-mount Depth (Inches) | 2 1/2 | |
Bottom-mount Depth (Inches) | 2 11/16 | |
Cutout Diameter or Length (inches) | 5 5/8 | |
Mounting Height (Inches) | 0.375 | |
Frame Width | 6.531 | |
Frame Length | 6.531 |
Product Research
Features
Woofer Size Classification Note: Some manufacturers, including Morel, call this size woofer a 6-1/2". Because it requires a larger cutout than a standard 6-1/2" speaker, Crutchfield has traditionally referred to this size woofer as a 6-3/4". Please enter your vehicle information to confirm fit.
Enclosure: If the woofer is mounted in an enclosure, Morel recommends a 0.14 ft³ sealed enclosure (0.11 ft³ to 0.35 ft³ is acceptable) or a 0.35 ft³ ported enclosure tuned to 65 Hz.
Midrange Size: The midrange drivers are not a standard size, approximately 2-1/8" dome. They are top mounted and have these dimensions:
- Depth: 0.875"
- Mounting height: 0.67"
- Flange height: 0.175"
- Cutout diameter: 2.97"
- Frame diameter: 3.93"
Tweeter Mounting: The tweeter is designed to be flush mounted; it is built on a flush mount frame. The dome is very delicate, so the mesh grille should always be used.
Tweeter Dimensions:
Flush Mount | |
---|---|
Mounting Height | 0.440" |
Mounting Depth | 0.545" |
Cutout Diameter | 1.715" |
Frame Diameter | 2.462" |
Crossover: The outboard crossovers' inputs and outputs are set screw terminals; they will accept bare wire up to 10-gauge. The woofers' low pass crossover is 12 dB/octave at 500 Hz. The midrange's crossover is 6 dB/octave, 500 Hz high pass and 12 dB/octave, 3.5 kHz low pass. The tweeters' high pass crossover is 12 dB/octave at 4.5 kHz. Jumpers inside each crossover allow you to adjust the tweeter output level (choose -2 dB, 0 dB, or +2 dB) and midrange output level (choose 0 dB or +2 dB). Each crossover has bi-amp inputs, one input for the midrange/tweeter and one for the woofer. When bi-amping the speakers, the input jumper wires need to be removed. Using four amplifier channels to bi-amp speakers typically improves the dynamic range and presents an easier load for the amp(s) to drive.
Crossover Dimensions:
- Width: 6.885"
- Height: 1.875"
- Depth: 5.195"
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...