Skip Navigation

StreetWires Power Station PSK04RM

4-gauge multi-amp wiring kit — red power/silver ground

3 Reviews

Item #: 211PSK04RM

This item is no longer available.

Original Price: $119.99

Shop all Multi-amp Wiring Kits

Add to Cart

StreetWires Power Station PSK04RM

Overview

Our take on the StreetWires Power Station PSK04RM

StreetWires Power Station amp kits provide the insulated power cables, fuses and connectors you need to install your amplifier and add an impressive, professional edge to your installation. Fine-strand, silver-plated oxygen-free wire reduces interference, so your power flows clean and pure at higher power levels.

StreetWires Power Station amp kits provide the insulated power cables, fuses and connectors you need to install your amplifier and add an impressive, professional edge to your installation. Fine-strand, silver-plated oxygen-free wire reduces interference, so your power flows clean and pure at higher power levels.

The Power Station PSK04RM multi-amp wiring kit handles amplifier systems with a rating of up to 600 watts. Each 4-gauge power and ground cable is protected by a durable, Poly Flex jacket, and come with nickel-plate ring terminals for a secure connection to your amplifier. A 4-output distribution block, in-line fuse holder, fuse, a turn-on lead, and assorted hardware is also included.

Good product. May not have all the connectors you need, depends on your setup, but most are there. All parts are good quality and product is well thought out.

David, Dothan, AL

What's in the Box:

  • One 17.75' length of 4-gauge power wire in a translucent red jacket (has attached battery ring terminal)
  • One 7.75' length of 8-gauge power wire in a translucent red jacket (has attached battery ring terminal)
  • One 6' length of 8-gauge ground wire in a clear jacket (has attached ring terminal)
  • One 16' length of 18-gauge remote wire in a blue jacket
  • In-line AFS fuse holder
  • One 100-amp AFS fuse
  • One 4- to 8-gauge distribution block (has three 4-gauge inputs and four 8-gauge outputs)
  • Two 8-gauge crimp-on ring terminals (each has a black insulator boot)
  • Four 8-gauge crimp-on spade terminals (two have a black insulator boot and two have a translucent red insulator boot)
  • Two 18-gauge crimp-on spade terminals (each has a translucent red insulator boot)
  • 1 Red butt connector
  • Six 4.5" wire ties
  • Instructions on package

Product Highlights:

  • multi-amp wiring kit with power and ground connections
  • 17.75 feet of 4-gauge red power cable
  • 7.75 feet of 8-gauge red power cable
  • AFS in-line fuse holder with 100-amp AFS fuse
  • 6 feet of 8-gauge silver grounding cable
  • distribution block (one 4-gauge input, four 8-gauge outputs)
  • 16 feet of 18-gauge blue remote turn-on wire
  • assorted connectors, ring terminals, spade terminals, and wire ties
  • warranty: lifetime
  • Our 60-day money-back guarantee
Reviews

StreetWires Power Station PSK04RM Reviews

Average Customer Review:

3 Reviews

StreetWires Power Station PSK04RM

Written by: David from Dothan, AL on March 30, 2009

Crutchfield Customer Review (What's this?)

Good product. May not have all the connectors you need, depends on your setup, but most are there. All parts are good quality and product is well thought out.

Pros:

Cons:

StreetWires Power Station PSK04RM

Written by: John from Colfax, Ca on April 23, 2007

Crutchfield Customer Review (What's this?)

This amp kit is nice. Easy to work with, wires are quite flexible along with a few terminal ends just in case you need it. The only bad this is the fuse holder broke on me when I was tightening down the bolt head.

Pros:

Cons:

StreetWires Power Station PSK04RM

Written by: ben from Lancaster, Ca on April 17, 2006

Crutchfield Customer Review (What's this?)

I purchased the 4-gauge multi-amp kit and found that the power wires are easy to cut and strip and are very flexible. I also purchased 3 sets of patch cables. I was amazed how quick the order was processed and sent to me in less than a week. I recommend this kit for anyone who is planning to run a multi-amp system with 100 amperes or less.

Pros:

Cons:

Details

Hands-on research

What's in the box?

  • One 17.75' length of 4-gauge power wire in a translucent red jacket (has attached battery ring terminal)
  • One 7.75' length of 8-gauge power wire in a translucent red jacket (has attached battery ring terminal)
  • One 6' length of 8-gauge ground wire in a clear jacket (has attached ring terminal)
  • One 16' length of 18-gauge remote wire in a blue jacket
  • In-line AFS fuse holder
  • One 100-amp AFS fuse
  • One 4- to 8-gauge distribution block (has three 4-gauge inputs and four 8-gauge outputs)
  • Two 8-gauge crimp-on ring terminals (each has a black insulator boot)
  • Four 8-gauge crimp-on spade terminals (two have a black insulator boot and two have a translucent red insulator boot)
  • Two 18-gauge crimp-on spade terminals (each has a translucent red insulator boot)
  • 1 Red butt connector
  • Six 4.5" wire ties
  • Instructions on package

Product Research

Features

General Overview: This is a dual amplifier wiring kit that includes 4-gauge and 8-gauge power cables, an 8-gauge ground cable, a turn-on lead, a power distribution block and accessories required to install two amplifiers. Speaker wire and patch cords are sold separately.

In-line Fuse Holder: The in-line fuse holder is waterproof and comes with a 100-amp AFS fuse. The fuse holder's set screw input and output accept bare 4-gauge wire (no ring terminal required). Integrated tabs allow you to mount the fuse holder using optional self-tapping screws. The fuse holder has the following dimensions: L=3.335", W=1.887" (including integrated mounting tabs), H=0.994".

Note: The set screws require 3mm and 5/32" Allen wrenches.

Distribution Block: The distribution block has three 4-gauge inputs and four 8-gauge outputs. For flexibility during installation, one input is located on the front of the distribution block and the other two are located on the sides. When you run wire, you only need to use one of the inputs. Two holes in the distribution block's base allow you to mount it using optional self-tapping screws. The distribution block has the following dimensions: L=2.065", W=2.194", H=0.835".

Note: The set screws require 3mm and 5/32" Allen wrenches.

Power and Ground Cables: The 4- and 8-gauge power cables have translucent red insulation jackets while the 8-gauge ground cable has a clear insulation jacket.

Remote Turn-on Wire: The 18-gauge remote turn-on wire has a blue insulation jacket.

Crimp-on Terminal Dimensions: The crimp-on terminals have the following dimensions:

  • Power Ring Terminal (installed): W=0.654", Inner Diameter=0.335"
  • 8-gauge Ground Ring Terminals: W=0.477", Inner Diameter=0.214"
  • 8-gauge Spade Terminals: W=0.327", Prong Spacing=0.152"
  • 18-gauge Spade Terminals: W=0.275", Prong Spacing=0.147"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Library