Skip Navigation

StreetWires 1/0-gauge 3/8" Crimp-on Power Rings®

2 Reviews

Item #: 211RTC0L

This item is no longer available.

Original Price: $9.99

Shop all Power Cable Terminals & Clips

Overview

Our take on the StreetWires 1/0-gauge 3/8" Crimp-on Power Rings®

StreetWires 1/0-gauge 3/8" crimp-on power rings provide secure connection for your amp's power and ground cables. Just insert the bare wire end and use a crimp tool to lock it in place. The pair includes red and black heat-shrink tubing. 8-millimeter hole diameter. Warranty: lifetime.

StreetWires 1/0-gauge 3/8" crimp-on power rings provide secure connection for your amp's power and ground cables. Just insert the bare wire end and use a crimp tool to lock it in place. The pair includes red and black heat-shrink tubing. 8-millimeter hole diameter. Warranty: lifetime.


Priced per pair

Worked as suggested. What else can I say. Insert cable and crimp. The heat shrink tube did take a little while to shrink, but I was using a hair dryer to try to make it shrink. I might suggest using a lighter to produce the heat. Just put the flame close to the tube, but not on it.

Bryan, San Ramon, CA

What's in the Box:

  • Two 1/0 AWG crimp-on power rings
  • Two 1.5" Lengths of heat-shrink insulation
Reviews

StreetWires 1/0-gauge 3/8" Crimp-on Power Rings® Reviews

Average Customer Review:

2 Reviews

StreetWires 1/0-gauge 3/8" Crimp-on Power Rings®

Written by: Bryan from San Ramon, CA on February 28, 2009

Crutchfield Customer Review (What's this?)

Worked as suggested. What else can I say. Insert cable and crimp. The heat shrink tube did take a little while to shrink, but I was using a hair dryer to try to make it shrink. I might suggest using a lighter to produce the heat. Just put the flame close to the tube, but not on it.

Pros:

Cons:

good product

Written by: mary from green Ohio on February 8, 2009

Crutchfield Customer Review (What's this?)

good: it comes with good heat shrink materal and is easy to make the hole on it larger with no problem. bad: it is hard to crimp the darn thing on. over all: good product. I would use vice to crimp it on the wire.

Pros:

Cons:

Details

Hands-on research

What's in the box?

  • Two 1/0 AWG crimp-on power rings
  • Two 1.5" Lengths of heat-shrink insulation

Product Research

Features

Overview: These connectors are designed to provide a secure, crimp-on termination for 1/0 AWG power and ground cables. Each terminal has a 8mm mounting hole, and heat-shrink insulation is included for the terminals. We recommend using a crimp tool to make the best connection.

Connection: When installing these crimp-on power rings, follow the instructions listed below:

  • Strip approximately 1/2" of insulation from the cable
  • Slide one length of the heat-shrink insulation over the cable, beyond the stripped portion
  • Push the wire (stripped end) into the connector's cavity (internal diameter: 0.5625")
  • Using a crimp tool, make a tight crimp, securing the wire inside the terminal
  • Slide the heat-shrink insulation over the power ring's crimped collar. Apply heat to cause the insulation to shrink and tightly adhere to the terminal and cable.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Library