Skip Navigation

This wiring kit does not include speaker wire, so you'll need to purchase that separately to complete your amp installation. This kit includes patch cables for a 2-channel or mono amp — you'll need to add cables for multi-channel amps.

StreetWires uses a blend of oxygen-free copper and copper-coated aluminum wires in their ZeroNoise 3 power cables, so your amp gets maximum power at a minimum price. ZN3 cables meet the strict CEA-2015 standards for strand count so you can be sure you'll get all the electrical conductivity and sonic transparency you demand in your power applications.

This 8-gauge amp kit includes a 16.4-foot stereo patch cord, along with the insulated ground and power cables, fuseholder and fuse, remote turn-on lead, and the connectors you'll need to power an amplifier with a fuse rating of up to 60 amperes.

Product Highlights:

  • amplifier wiring kit with power and ground connections
  • 18 feet of 8-gauge red power cable with ring terminal
  • 4 feet of 8-gauge brown ground cable with ring terminal
  • cable composition: 60% oxygen-free copper and 40% copper-coated aluminum
  • 16.4-foot stereo RCA patch cable
  • AFS in-line fuse holder with 60-amp AFS fuse
  • 16 feet of 18-gauge blue remote turn-on wire
  • assorted connectors, spade terminals, and wire ties
  • warranty: lifetime
  • Our 60-day money-back guarantee

StreetWires ZeroNoise 3 ZN3Ki-08 Reviews

Average Customer Review:

4 Reviews

StreetWires ZeroNoise 3 ZN3Ki-08

Written by: Anonymous from San Antonio, TX on July 2, 2013

Crutchfield Customer Review (What's this?)

Everything I needed to wire up my system and Just the right length.




Written by: jim from Atlanta on May 28, 2013

Crutchfield Customer Review (What's this?)

an adequate set up




Written by: RickyR from Jacksonville, FL on April 8, 2013

Crutchfield Customer Review (What's this?)

Great product! Comes with everything you'll need to install an amp in your car.

Pros: fully loaded. no need to run around town to find all your parts

Cons: a little pricey but convinence makes up for the high price.

StreetWires ZeroNoise 3 ZN3Ki-08

Written by: Anonymous from Texas on February 11, 2011

Crutchfield Customer Review (What's this?)

Way overpriced, I sent it back and got another kit with #4 power cable and #16 speaker wire for less than half the price!!



Hands-on research

What's in the box?

Download owner's manual

  • One 18' length of 8AWG power wire in a translucent red jacket (has attached 5/16" battery ring terminal)
  • One 4' length of 8AWG ground wire in a translucent brown jacket (has attached 3/16" ring terminal)
  • 16' length of 18AWG remote turn-on lead wire in a blue jacket (has bare wire on each end)
  • 16.4' Stereo RCA cable
  • In-line 8AWG AFS fuse holder
  • One 60-amp AFS fuse
  • Two 8AWG crimp-on spade connectors (one has a black insulator boot and one has a translucent blue insulator boot)
  • One 18AWG crimp-on spade connector (has a translucent blue insulator boot)
  • One 18AWG red butt connector
  • 8 Wire-ties
  • Instructions on package

Product Research


Overview: This is an 8-gauge single amplifier wiring kit that includes the power & ground cables, remote turn-on lead, stereo RCA cable, and accessories required to install one amplifier.

Note: Speaker wire sold separately.

In-line Fuse Holder: The in-line fuse holder is waterproof and comes with a 60-amp AFS fuse. The fuse holder's set screw input and output accept bare 4-gauge wire (no ring terminal required). Integrated tabs allow you to mount the fuse holder using optional self-tapping screws. The fuse holder measures 1.625" (w) x 1.25" (h) x 3.125" (d).

Note: The set screws require 3mm allen wrenches.

8-AWG Power and Ground Cables: The 18' 8-gauge power cable has a translucent red insulation jacket while the 4' 8-gauge ground cable has a translucent brown insulation jacket.

18-AWG Remote Turn-On Lead: The amplifier comes supplied with a 16' 18-gauge remote turn-on lead wire.

Interconnect Cable: The 8-gauge single amplifier kit includes a 16.4' stereo RCA cable with a clear insulation jacket. The  interconnect cable employs color-coded (black/red) bands for easy left and right identification.

Crimp-on Terminal Dimensions: The crimp-on terminals have the following dimensions:

  • 8-AWG Power Ring Terminal (installed): Outer Diameter = 0.625", Inner Diameter = 0.3125"
  • 8-AWG Ground Ring Terminal (installed): Outer Diameter 0.5625", Inner Diameter = 0.1875"
  • 8-AWG Spade Terminals: Outer Width = 0.375", Inner Width = 0.215"
  • 18-AWG Spade Terminal: Outer Width = 0.285", Inner Width = 0.165"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.