Chat
Contact us
Close contact box
Connect ID #
551 011 897 4
Connect ID #
551 011 897 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Code Alarm CA4054 Remote start system

Item # 220CA4054

Code Alarm's CA4054 remote start system can start your car from up to 1500 feet away — that's over a quarter...

Find what Fits your vehicle

Remove

Checking fit...

Code Alarm's CA4054 remote start system can start your car from up to 1500 feet away — that's over a quarter...

4 questions - 5 answers

Item # 220CA4054

Shop all Code Alarm Remote Start

About the Code Alarm CA4054

Buck Pomerantz

Start your vehicle remotely

Code Alarm's CA4054 remote start system can start your car from up to 1500 feet away — that's over a quarter mile. This single-button system is especially handy if your factory keyfob is built onto the head of the key. Just push the button on the keychain remote, and your car will be warmed or cooled for your comfort when you get to it. You can even program the system to automatically start your vehicle every 2 or 3 hours, which is useful in extreme cold conditions when you want to keep your engine fluids from freezing. An auxiliary channel allows you to add a function like unlocking the doors while you start your car.

Start your vehicle remotely

Code Alarm's CA4054 remote start system can start your car from up to 1500 feet away — that's over a quarter mile. This single-button system is especially handy if your factory keyfob is built onto the head of the key. Just push the button on the keychain remote, and your car will be warmed or cooled for your comfort when you get to it. You can even program the system to automatically start your vehicle every 2 or 3 hours, which is useful in extreme cold conditions when you want to keep your engine fluids from freezing. An auxiliary channel allows you to add a function like unlocking the doors while you start your car.

Note: If you know how to use a multimeter and have experience working with your vehicle's electrical system, you should be able to install this remote start system yourself. If you're unfamiliar with installing car security equipment, please consider getting professional installation (see Accessories).

Important Note:
We offer an interface that can save you lots of time when you install a Code Alarm system in most vehicles. Chat or call us at 1-888-955-6000 to see if the interface will work with your vehicle.

IMPORTANT:
If you know how to use a multimeter and have experience working with your vehicle's electrical system, you should be able to install this remote start system yourself. If not, please consider having your system professionally installed.


To ensure vehicle compatibility, please enter your vehicle information in OutfitMyCar. Your order will be reviewed by our Car Experts group, who will contact you if further information or recommended accessories are needed.

READ LESS

Product highlights:

  • remote start system
  • remote start function is for fuel injected, diesel, and hybrid vehicles with automatic transmissions only
  • two 1-button 1-way transmitters — up to 1500-foot range
  • glass-mount antenna with red status LED
  • one auxiliary channel for adding a function
  • can auto start every 2 or 3 hours
  • compatible with FlashLogic FLCAN vehicle interface module
  • warranty: limited lifetime
  • MFR # CA4054

What's in the box:

  • CA-4054 control module
  • 2 CATX1B 1-button 1-way remote transmitters (each with CR2016 battery installed)
  • 2 Key rings (installed on remotes)
  • Antenna/LED/Valet module (with self-adhesive pad)
  • 4-pin Main harness with 30" 36" and 55" leads (part #41201052)
  • 3-pin Parking Light harness with 24" 30" and 36" leads and in-line 15A ATO fuse (part #41201031)
  • 6-pin Start harness with 20" leads and in-line 20A and 30A ATO fuses (part #41201101)
  • 4-pin Alternate Output harness with 20" leads (part #41201021)
  • 2-pin Lock Output harness with 36" lead (part #41201041)
  • 5-pin Antenna/LED/Valet harness with flat 8' cable (part #41201920)
  • Spring-loaded pin switch (with three hex nuts and an external-tooth lock washer)
  • Owner's Guide
  • Installation Guide
  • Warning sticker

Customer reviews for Code Alarm CA4054

Loading reviews...

Average review:

4.5 out of 5 stars
3 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Code Alarm CA4054

Russ B.

Product Research

Features

Overview: The Code-Alarm CA4054 Remote Start System, a part of the Professional Series line, will remotely start your vehicle. This offers you the convenience of warming up your car on a cold day, or cooling it down on a hot day. The CA4054 is not a car security or keyless entry system, although the unit will unlock the doors when the remote start feature is active. The system comes with two 1-button remotes.

Glass-Mount Antenna: The included glass-mount antenna includes a red LED and the valet switch built in. Typically, the antenna is mounted high on your windshield near the rear-view mirror, using the provided dual-sided adhesive pad. This location gives you optimal range for the remotes, high visibility for the status LEDs, and a convenient location for the valet switch/programming button.

Data Bus Interface (DBI) Port: The control module has a 4-pin Data Bus Interface (DBI) port, which allows you to plug in an optional FlashLogic Transponder/Door Lock/Remote Start Interface (220FLCAN) directly into the system. These modules, compatible with many late model vehicles, can save considerable installation time by eliminating the need to find and splice various wires within the vehicle. Typical connections that are made with the interfaces include tachometer, brake, door locks, and ignition/starter.

Note: Even with the interface, there will be some required splicing into your vehicle's factory wiring.

Remotes: The CA4054 comes with two 1-way, 1-button remote transmitters (CATX1B). The remotes operate at 433 MHz to give you a range of up to 1500 feet. Each remote requires one CR2016 battery (installed). Additional remotes (up to a total of 4) can be programmed to operate the remote start system.

Transmitter Verification: As a safety precaution, each time the vehicle's ignition is turned on, the status LED will flash the number of transmitters programmed into the system. This helps identify and prevent unauthorized transmitters from accessing your vehicle.

Operation: The Code-Alarm CA4054 can remotely start your vehicle using the remote transmitters. When activated, the system will flash or turn on the parking lights to confirm the vehicle was started. The engine will remain running for a pre-programmed amount of time (5, 10, 15, 20, 45, or 60 minutes). Before operating the vehicle, you will need to insert the key, turn to the On position, and depress the brake to disengage the starter procedure.

Single/Double Press: The system can be configured that the remote start is activated with either a single press of the transmitter button or with two presses of the button.

Preheating/Precooling: Before exiting the vehicle, you should set the temperature controls to the desired setting and operation. When the vehicle is started the next time, the heater or air conditioner will be activated to heat or cool the vehicle's interior to your setting.

Special Vehicle Accommodations: The remote start can be configured to accommodate a variety of vehicle engine types. You can program the remote start for a gasoline engine with no delay for the starter output wire. You can also program the unit for a diesel engine with a delay in the starter output wire of 10, 15, 20, or 45 seconds after the ignition has been powered up by the remote start. This delay is required in order for the diesel engine's glow plugs to become ready to start the engine. The system also features a special compatibility for a hybrid vehicle.

Quick Stop: This feature allows you to keep the engine running and the vehicle secure while you make a short stop, taking the keys with you.

Tach Programming: The system will not operate unless tach is programmed, or the tachless option is turned on. The CA4054 will learn the tach rate of most vehicle's single coil, multiple coil packs, or single injector. The Smart Tachless mode is available only if a tach signal has never been learned to the system. When activated, the Smart Tachless mode will automatically be set as the Tach Mode for the system without the need of further programming. The parking lights provide an indication of which Tach mode has been chosen:

  • Tach: hard wired directly to the tach wire of the vehicle to monitor AC voltage.
  • Tachless (Crank Average / Voltage): determines crank time by averaging the last 8 times the vehicle was started with the key, then monitors the change in voltage after remote start.
  • Hybrid (Crank Average / No Voltage): determines crank time by averaging the last 8 times the vehicle was started with the key.
  • DBI Port: monitors the vehicle's tach rate through an interface module connected to the DBI port.

Safety Features: For safety and security reasons, the system will shut down or prevent the remote starter from activating if any of the following occur:

  • The vehicle hood is open.
  • The gear shift selector is not in Park.
  • The brake pedal is depressed prior to turning the ignition key to the On position.
  • The valet mode is active.

Loading accessories...

Customer Q&A

4 questions already asked

Q
will this work with a 2004 Audi Avant A6 quattro w/o bose?
ron  Sep 21, 2015
1 answer
A
For details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
kristina  Sep 21, 2015 (Staff)
Q
Will this work on a 2012 GMC Sierra 1500 truck?
joe  Jan 01, 2015
1 answer
A
For details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
kristina  Jan 04, 2015 (Staff)
Q
Will this work with a 2012 ford fusion hybrid?
rudolph  Dec 07, 2014
1 answer
A
For details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
kristina  Dec 07, 2014 (Staff)
Q
Will this work with a Manual transmission 2014 mustang GT?
bryce  Oct 23, 2014
2 answers
A
For details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
kristina  Oct 27, 2014 (Staff)
A
For details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
greg  Oct 25, 2014 (Staff)

Loading articles...

Compare the sound