We offer vehicle-specific interfaces that you'll need to complete your remote start/car security installation. Please identify your vehicle as we review every order to make sure you've got everything you need.

Upgrade security and add remote start

Your new car may feature keyless entry, but most likely doesn't offer much in the way of security protection, remote start, or other remote functions. Code Alarm's CA6153 security system protects your car and its contents with an impact sensor and alarm, so unwanted intrusions won't be a worry anymore. Plus, it adds the convenience of remote start — you can start your car before you leave the house or your office to avoid the worst of winter's bite and summer's sweltering heat. This remote start system works with diesel and hybrid vehicles too.

The system includes:

  • remote start
  • a dual-stage magnetic shock sensor that detects unauthorized tampering
  • a powerful 125 dB weatherproof siren
  • two metal-clad remote controls
  • remote door lock and unlock
  • a starter interrupt feature which shuts down ignition during unauthorized use

Even more:

Ignition-activated doorlocks, carjacking protection, and automatic rearming provide additional reassurance. The CA6153 also features an override switch for valet parking, while the "silent choice" feature allows you to arm and disarm your car alarm without disturbing your neighbors. You can expand your protection even more by adding an optional sensor to the auxiliary input, or using the auxiliary output to unlock the trunk, turn on the interior lights, or run another operation. The car-finding feature sounds your alarm at low volume, then increases the volume with each push of the button, so you can find your car quickly in a crowded parking lot.

Important Note:
We offer an interface that can save you lots of time when you install a Code Alarm system in most vehicles. For a limited time, you can save $60 on the interface if purchased with this Code Alarm system. Chat or call us at 1-888-955-6000 to see if the interface will work with your vehicle.

Product Highlights:

  • automotive keyless entry and security system with remote start
  • Remote Start function is for fuel injected, diesel, and hybrid vehicles with automatic transmission only
  • two 4-button extended range metal-clad transmitters
  • dual-stage impact sensor — chirps when the vehicle's bumped and sets off the alarm with further violations
  • 125 dB weatherproof siren
  • starter interrupt
  • one auxiliary channel
  • anti-carjacking protection
  • ignition-activated doorlocks
  • valet mode overrides alarm
  • silent arm and disarm
  • warranty: lifetime
  • Our 60-day money-back guarantee

Hands-on research

What's in the box?

Download owner's manual

  • CA-6153 control module
  • 2 CATX-MT 4-button 1-way remote transmitters (each with CR2016 battery installed)
  • Key ring
  • 125dB Weatherproof siren with 10" power/ground wires
  • Glass-mount antenna with dual-sided adhesive pad (part # 41800292)
  • Dual-stage shock sensor (part # 47000230) with 4-wire harness
  • 3' 4-Pin Main Harness (part # 41201451)
  • 2' 6-Pin Starter Harness (part # 41201101)
  • 3' 6-Pin Output harness (part # 10327141)
  • 3' 8-Pin Input Harness (part # 10314241)
  • 3' 4-Pin Alternate Output Harness (part # 41201021)
  • 3' 3-Pin Lock Output Harness (part # 10314231)
  • SPDT Relay and socket (for starter interrupt) with attached 18" 4-wire harness (part # 10244053)
  • 8.25' Black flat cable for glass-mount antenna (part # 41201920)
  • Spring-loaded pin switch (with three hex nuts and an external-tooth lock washer)
  • Owner's Guide
  • Installation Guide
  • Limited Warranty/Consumer Registration Card
  • On-line Product Registration card
  • Maximum Insurance Discount Authorization card
  • Warning sticker
  • Code-Alarm window decal

Product Research

Alarm Features
Remote Start Features
Accessories

Alarm Features

Overview: The Code-Alarm CA6153, a part of the Professional Series line, has a remote start for cooling down or warming up your vehicle before you drive, a keyless entry system to remotely lock or unlock your doors, and a security system to protect your vehicle and its contents. It comes with two sturdy metal remotes.

Note: The remote start function is only for fuel injected, diesel, and hybrid vehicles with automatic transmission.

Remotes: The CA6153 comes with two 1-way, 4-button remote transmitters (CATX-MT). The remotes have sturdy metal bezels, and operate at 433 MHz to give you excellent range. The 1-way remotes contain four buttons for lock, unlock, vehicle locator/panic mode, and remote start. Requires one CR2016 battery (installed). Additional remotes (up to a total of 4) can be programmed to operate the alarm/remote start.

Glass-Mount Antenna: The included glass-mount antenna includes two Blue LEDs and the valet switch built in. Typically, the antenna is mounted high on your windshield near the rear-view mirror, using the provided dual-sided adhesive pad. This location gives you optimal range for the remotes, high visibility for the status LEDs, and a convenient location for the valet switch/programming button.

Data Bus Interface (DBI) Port: The alarm's control module has a 4-pin Data Bus Interface (DBI) port, which allows you to plug in an optional FlashLogic Transponder/Door Lock/Remote Start Interface (220FLCAN) directly into the system. These modules, compatible with many late model vehicles, can save considerable installation time by eliminating the need to find and splice various wires within the vehicle. Typical connections that are made with the interfaces include tachometer, brake, door locks, and ignition/starter.

Note: Even with the interface, there will be some required splicing into your vehicle's factory wiring.

125dB Siren: The CA6153 includes a siren which emits a single tone pattern at 125dB, which is equal to the threshold of pain in humans. Its compact size (2-3/4" footprint diameter, 3-3/8" horn diameter) gives you additional mounting flexibility. The weatherproof design keeps the siren operating flawlessly in the harsh, under hood environment.

Silent Choice: The Silent Choice feature allows you to control the arm/disarm chirps from the remote control. When Silent Choice is activated, a second press of the "lock" button is required to activate an audible arming response from the vehicle. The system default is Silent Choice disabled, which means the alarm will chirp for arm and disarm on the first button press.

Active/Passive Operation: The system can be programmed for passive or active arming and door locking. Active arming/locking requires the use of the remote to arm the system or to lock the doors. When programmed for passive operation, the doors lock and the system is armed automatically 1 minute after the last door is closed.

Delayed Arming: For vehicles with a delayed dome light, the system can be programmed to delay arming up to 60 seconds after the lock button is pressed. Once programmed, the system will learn the timing of the dome light delay and add 2 seconds before arming.

Door Locks/Trunk Release: The alarm can lock and unlock the vehicle's doors using the remotes. The alarm can be wired to work with positive or negative switching locks, reverse polarity, and positive or negative multiplexed door locks. Additional relays may be required for installation. In addition to unlocking and locking the doors, the system can also open the vehicle's trunk or hatch.

Note: When interfacing with any other type of factory door lock system besides negative switching locks, or when using aftermarket door lock actuators, two SPDT relays (such as 120E5000) will be needed. If your vehicle requires the use of a Data Integration module that controls your factory door locks, no extra parts besides the Data Integration module will be required.

Two-stage Door Unlock: The alarm's door lock function can be set to operate in two stages. The driver's door only is unlocked with one press of the unlock button. A second press of the button within 3 seconds will unlock the remaining doors.

Shock Sensor: The included dual-stage magnetic shock sensor will respond with a warning chirp when there is a light impact to the vehicle. Harder impacts will fully trigger the alarm. You can bypass the shock sensor for one arm cycle, and will default back to normal operation the next time the system is armed. The shock sensor's sensitivity can be adjusted if needed.

Starter Interrupt Output: When the alarm is triggered, the system will disable the vehicle by interrupting the circuit to the starter via a relay. As long as the system is in alarm mode, the vehicle's engine cannot be started, preventing a possible theft. The relay needed to install this feature is included with the alarm.

Personal Protection Alarm Mode: The alarm's Personal Protection or Panic Mode will activate an alert when you press and hold the panic button continually for three seconds. The transmitter's normal functions are suspended during panic mode, except to allow you to lock or unlock the doors. You can manually shut off the alarm with the transmitter, or the system will automatically stop after 30 seconds.

Real Panic Sound (RPS): During panic and alarm trigger modes, the horn and/or siren will sound in a randomized pattern. This draws more attention to the vehicle that alarms without this feature.

Progressive Car Find: To assist you in locating your vehicle in a crowded parking lot, the Progressive Car Find feature will sound the alarm and/or honk the horn five times at low volume. If you have not located the vehicle, the system will repeat the action at increasingly higher volumes (low, medium, high) with each press of the button.

Carjack Mode: The CA6153 features a Carjack mode, which must be turned on in system programming. The Carjack mode provides a delayed and progressive alarm response, starting with siren chirping, to full alarm with flashing parking lights, to starter kill activation, rendering the vehicle disabled.

Auxiliary Output: The alarm features an auxiliary output to operate optional accessories such as power windows or sunroof, or a powered sliding door. This 500mA output is capable of driving relays, and can be programmed to operate in various timing configurations (i.e. push and hold, latched, latched until ignition on, etc.).

Remote Start Features

Operation: The Code-Alarm CA6153 can remotely start your vehicle using the remote transmitters. When activated, the system will sound, the parking lights will flash once, and the system will confirm that the vehicle is safe to start. If all safety parameters are correct, the vehicle will start within 5 seconds. Once started, the parking lights will turn on as a visual indication that the vehicle has started and is running. If the vehicle stalls or fails to start, the system will pause 5 seconds, then try two more times to start the vehicle. If the vehicle does not start after the third attempt, the starting process will be aborted. Before operating the vehicle, you will need to insert the key, turn to the On position, and depress the brake to disengage the starter procedure.

Single/Double Press: The system can be configured that the remote start is activated with either a single press of the transmitter button or with two presses of the button.

Special Vehicle Accommodations: The remote start can be configured to accommodate a variety of vehicle engine types. You can program the remote start for a gasoline engine with no delay for the starter output wire, or program the unit for a diesel engine with a delay in the starter output wire of 10, 15, 20, or 40 seconds after the ignition has been powered up by the remote start. This delay is required in order for the diesel engine's glow plugs to become ready to start the engine. The system also features a special compatibility for a hybrid vehicle.

Quick Stop: This feature allows you to keep the engine running and the vehicle secure while you make a short stop, taking the keys with you.

Interval Starting: The CA6153 has the ability to start the vehicle every 2 or 3 hours over a 48-hour period. This is an especially useful feature in cold climates. You can select a two- or three-hour interval, as well as the run times in the programming setup. During this period, you can shut off the engine at any time using the remote transmitter.

Daily Start Timer: The system has the ability to start your vehicle based on a 24-hour countdown timer. Once you have finished operating the vehicle for the day, a quick procedure must be followed to complete the timer process.

Extended Run Time: The system allows you to extend the time the vehicle will be running when under remote start. For example, if you have your vehicle set to run for 20 minutes and the time remaining in the current run cycle is 5 minutes, you can reset it to run another full 20 minutes.

Turbo Timer: If your vehicle has a turbo, the Turbo Timer option will keep the engine running for a period of time (1, 3, or 5 minutes) after you turn off the ignition key. This allows the vehicle's turbo to properly cool before the engine is shut off.

Tach Mode: The system can be programmed to determine how it will monitor the engine running during remote start. It can be set to one of the following options:

  • Tach: hard wired directly to the tach wire of the vehicle to monitor AC voltage.
  • Tachless (Crank Average / Voltage): determines crank time by averaging the last 8 times the vehicle was started with the key, then monitors the change in voltage after remote start.
  • Hybrid (Crank Average / No Voltage): determines crank time by averaging the last 8 times the vehicle was started with the key.
  • DBI Port: monitors the vehicle's tach rate through an interface module connected to the DBI port.

Smart Tachless Mode: This mode is only available if a tach signal has never been learned to the system, and when activated, will automatically change the Tach Mode feature in option programming to Tachless without the need to enter the feature programming mode.

Safety Features: For safety and security reasons, the system will shut down or prevent the remote starter from activating if any of the following occur:

  • The vehicle hood is open.
  • The brake pedal is pressed prior to turning the ignition key to the On position.
  • The engine is over-revved (tach checking only).
  • The valet mode is active.

Accessories

FlashLogic Interface Module: The optional FlashLogic Databus Interface Module (220FLCAN) communicates with your vehicle's Databus to provide plug-in capability for various functions of the Code-Alarm security system. Typical functions include tach input, door trigger, dome light supervision, factory alarm arm/disarm, trunk/hatch open, diesel glow plug input, remote start, and factory keyless entry controls. Compatibility and available functions vary depending upon year, make, and model of vehicle.

Note: Before installing, the FlashLogic module will need to configured for your specific vehicle via web-update. Some splicing into factory wiring will be required.

Universal Transponder Interface (UTI): The optional Universal Transponder Interface (UTI) works with vehicles that use an "immobilizer" key system, allowing you to operate the alarm system without interfering with the vehicle's anti-theft features. The UTI works with vehicles that have a transponder or RF-based immobilizer, including the GM Passkey systems.

Digital Tilt Sensor: The optional Code-Alarm DUB1 digital tilt sensor can detect when the angle of your vehicle changes and trigger the alarm to protect you from tow trucks and tire or wheel thieves. After you have parked your vehicle, the DUB1 has a digital self-leveling feature to determine the angle of your parked vehicle. If that angle changes due to the vehicle being jacked up or towed, it will trigger a full alarm in the security system.

Door Lock Actuators: Power door locks can be added to a vehicle with manual door locks with a Door Lock Actuator, enabling you to lock/unlock your doors with the CA6153's keyless entry feature. A Standard 2-wire Door Lock Actuator (220DA1) is available for normal manual door locks. For cable-driven door locking systems, a Motor Clutch-type Door Lock Actuator (220DA2) and a Cable Kit (220CLBK) will be needed. You will need an actuator for each door you want to control.

1-way Remote Transmitter: Up to 4 remote transmitters can be used with the CA6153 security system. Additional CATX-MT 1-way 4-button remotes can be purchased and programmed to operate your system.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Be the first to review this product
Great Gear Giveaway

Submit a review and then enter to win a $500 rewards card

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Get everything you’ll need to enjoy your new Code Alarm CA6153

Add a module and connect to your vehicle's databus interface. You'll need to splice into your factory wiring.
Get more convenience and effective protection with additional sensors and relays.
Having the right tools can help a lot when it comes time to do the installation.
Get replacement remotes and other accessories for your car security system.
Get more info about having your new alarm put in by a qualified professional in your area.
Integrating into your car's system saves installation time.
Code Alarm DLRKP

Code Alarm DLRKP

Door lock relay kit

Item #: 220DLRKP

$19.99
Add to Cart
Code Alarm CLBK

Code Alarm CLBK

Cable kit for cable driven door lock

Item #: 220CLBK

Code Alarm DA1

Code Alarm DA1

Standard 2-wire door lock actuator

Item #: 220DA1

(2)

Code Alarm DA2

Code Alarm DA2

Door lock motor-clutch type

Item #: 220DA2

$14.99
Add to Cart
Audiovox PROPDL25

Audiovox PROPDL25

Add power door locks to two doors in your vehicle

Item #: 220PRPDL25

(4)

$49.99
Add to Cart
Audiovox PRO-PDL-45

Audiovox PRO-PDL-45

Add power door locks to four doors in your vehicle

Item #: 220PRPDL45

$79.99
Add to Cart
Code Alarm CAGBS

Code Alarm CAGBS

Glass break sensor for Code Alarm security systems

Item #: 220CAGBS

$19.99
Add to Cart
Code Alarm DUB1

Code Alarm DUB1

Digital tilt sensor

Item #: 220DUB1

(1)

$39.99
Add to Cart
Metra Crimp Tool and Connectors

Metra Crimp Tool and Connectors

Package contains crimp tool and over 150 pieces

Item #: 120CRIMPKT

(15)

$19.99
Add to Cart
S&G Wire Cutter/Stripper Tool

S&G Wire Cutter/Stripper Tool

Cuts and strips 12- to 22-gauge wire

Item #: 18119100

(17)

$19.99
Add to Cart
Pro.Fit Wire Worm

Pro.Fit Wire Worm

Installation tool helps route wiring through tight spaces

Item #: 042DM4533

(34)

$12.99
Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6NGL

(54)

$24.99
Add to Cart
S&G Tool Aid 87615

S&G Tool Aid 87615

Window and Door Clip Removal Tool

Item #: 18187615

(12)

S&G Tool Aid 87650

S&G Tool Aid 87650

Door Trim and Panel Removal Tool

Item #: 18187650

(71)

Skewdriver Pro SPK4042

Skewdriver Pro SPK4042

Ratcheting straight and offset screwdriver set with 40 bits (Skewdriver Pro with ratchet handle, pictured)

Item #: 180SPK4042

(8)

$49.99
Add to Cart
Spec Tools SQR-200a Squeeze Wrench

Spec Tools SQR-200a Squeeze Wrench

Narrow space ratchet kit with 18 sockets

Item #: 180SQR200A

(1)

$49.99
Add to Cart
Install Bay 3320

Install Bay 3320

Auto-ranging digital multimeter

Item #: 1203320

$39.99
Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6LNGL

(2)

$29.99
Add to Cart
Install Bay IB35400

Install Bay IB35400

Premium door panel and trim tool

Item #: 12035400

$15.99
Add to Cart
Code Alarm Multi-Tone Siren

Code Alarm Multi-Tone Siren

Compact security system siren (Model MBS)

Item #: 220MBS

(1)

$29.99
Add to Cart
Posi-Products™ Car Alarm Connectors

Posi-Products™ Car Alarm Connectors

19 connectors for installing a car alarm or remote starter

Item #: 669PP503

(5)

$25.99
Add to Cart
XpressKit 8607

XpressKit 8607

Pin switch

Item #: 60786075

InstallCard: Security System with Remote Start

InstallCard: Security System with Remote Start

Prepaid professional installation of security system with remote start

Item #: 597421019

(2)

$199.99
Add to Cart
FlashLogic FLCAN Module

FlashLogic FLCAN Module

Connects a Code Alarm security system to your vehicle's databus interface

Item #: 220FLCAN

(12)

$79.99
Add to Cart