Skip Navigation

Audiovox's RVM35 rear-view mirror monitor goes into action when you put your vehicle in reverse — its integrated 3.5" color monitor automatically displays the view from your rear-view camera in an easy-to-see location. The mirror mounts over your existing rear-view mirror with spring clamps for a secure fit, and it gets its power from your vehicle's reverse lights. The included monitor cable features an RCA input that'll accept a signal from just about any rear-view camera on the market.

Product Highlights:

  • rear-view mirror with integrated 3.5" rear-view TFT monitor
  • power cable and tap connectors included
  • monitor turns on automatically when car goes into reverse
  • RCA video input
  • dimensions: 10-5/16"W x 3-7/16"H x 1-11/16"D
  • warranty: 1 year
  • Our 60-day money-back guarantee

Audiovox RVM35 Monitor Reviews

Average Customer Review:

1 Review

Too many problems...

Written by: Chip from Atlanta, GA on February 19, 2010

Crutchfield Customer Review (What's this?)

I had several issues with this product. First, the camera image in the mirror is impossible to see in daylight. I adjusted the image to full brightness and still couldn't see a thing during the daytime. At night, I can see an image but unless the area behind my vehicle is fairly well lit then the image is too hard to see. Secondly, in the image panel inside the mirror there is what appears to be some insulation of some kind that hangs over into the image panel partially obscurring the bottom part of the image. Thirdly, this thing vibrates so badly when my vehicle is in motion so as to be barely useable as a mirror. All in all, too many problems to deal with for one product. I used it in my vehicle for about 2 days and finally couldn't stand it anymore.

Pros:

Cons:

Hands-on research

What's in the box?

Download owner's manual

  • Rear-view mirror with integrated 3.5" rear-view TFT monitor and attached 18" cord terminated by a proprietary connector
  • 19.75' Power/Video cable with a proprietary connector on one end and a composite vide along with a power and ground lead on other end
  • 2 Wire tap connectors
  • Installation/User's Manual

Product Research

Features

Overview: The Audiovox RVM35 Rearview Mirror/Monitor, when used with a backup camera (sold separately), is designed to assist your, the driver, by providing a clear and wide image of the area behind your vehicle whenever the vehicle is shifted into reverse.

Note: You should never rely solely on this product to ensure the area is clear of pedestrians, vehicles and other obstructions. Use the Rearview Mirror/Monitor and look both ways. This product is not intended to replace existing safety procedures, but to add an additional safety tool for your vehicle.

Rearview Mirror with Integrated Monitor: The RVM35 features a rearview mirror and integrated 3.5" TFT LCD monitor. The integrated LCD monitor features a 4:3 aspect ratio and a resolution of 480 x 234 pixels.

Automatic Turn-On: The Audiovox RVM35 connects to your vehicle's back-up lights using the supplied 19.75' Power/Video cable and wire tap connectors. The RVM35's integrated LCD monitor will automatically turn on when your vehicle is put in reverse.

Composite Video Input: The Audiovox Rearview Mirror/Monitor connects to your vehicle's back-up camera using composite video. The RMV35 features a 19.75' Power/Video cable which features a male composite RCA connector to plug into your back-up camera.

Mounting: The RVM35 Rearview Mirror/Monitor easily mounts to your vehicle's existing rearview mirror with integrated spring-clamps.

Voltage DC12V/Operating Current: 80mA

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.