Vehicle-Specific Custom Enclosure: This MTX ThunderForm
enclosure is specifically designed to mount in the cargo area in select 1993-2002
Chevrolet Camaros and Pontiac Firebirds (does not fit convertibles). Please refer
to the Crutchfield Car Selector to confirm fit for your vehicle.
Enclosure: The ThunderForm enclosure is made of molded
high-density polyethylene resin, which dampens resonance and is rigid enough
to resist flexing. It is an acoustic suspension (sealed) enclosure.
Mounting Location: This enclosure is designed and molded to
mount in the cargo area on the driver's side and is not visible once installed.
T-Top storage and luggage cover are unaffected. Note: The provided
dimensions are taken at the widest points of the enclosure. Keep in mind that these
enclosures are custom made to fit in this particular vehicle, so the enclosure will
fit properly in only one specific location. Mounting hardware is included to complete
10" Terminator Subwoofer: This enclosure comes loaded
with a single 10" MTX Terminator woofer. The woofer has an unusual impedance,
specifically designed for the built-in amp, and cannot be replaced with a standard
Class D Amplifier: The enclosure contains a built-in 200-watt
Class D (digital) amplifier that allows RCA or speaker-level input. The amplifier
is highly efficient and designed specifically for use with the subwoofer in the
Electronic Bass Control (EBC): The EBC is a wired remote and
allows you to adjust the bass level from anywhere in the vehicle. Installing the
EBC is optional.
Low-pass Crossover: The low-pass crossover point is adjustable
from 50 to 150 Hz for a seamless transition between the output of this unit and that
of the other speakers in the vehicle.
- Gain Control: rotary control; set the
gain of the amplifier is match the input
- Crossover Control: rotary control;
adjust the crossover from 50 to 150 Hz
Auto Turn-On Feature: When the speaker level inputs are used,
the system will automatically turn on and off with the radio.
Note: The auto turn-on feature does not
operate when the preamp level inputs are used, connecting the
remote turn-on lead is required.
Tools Required: The manual provides this list of required
- Powered Screwdriver
- #2 Phillips Head bit
- 5/16" Wrench
- Wire Cutters
- Terminal Crimper
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to
find elsewhere. That's because we have our own in-house Product Research
team. They verify what’s in the box, check the owner's manual, and record
dimensions, features and specs. We stay on top of new products and technologies
to help people make informed choices.