Vehicle-Specific Custom Enclosure: This MTX ThunderForm
enclosure is specifically designed to replace the factory console in select
1992-2000 Cadillac, Chevrolet, and GMC Escalade, Suburban, Yukon, Tahoe, and
full-size Blazer models. Please refer to the Crutchfield Car Selector to confirm
fit for your vehicle.
Enclosure: The ThunderForm enclosure is made of molded
high-density polyethylene resin, which dampens resonance and is rigid enough
to resist flexing. The color of the enclosure matches factory GM colors. Three
cup holders (2 for the front and 1 for the rear) and a tray are molded into the
top of the enclosure. It is a down-firing acoustic suspension (sealed) chamber.
Mounting Location: This enclosure is designed and molded to
mount between the front bucket seats, replacing the factory console, with the
woofer firing downward. Note: The provided dimensions are taken
at the widest points of the enclosure. Keep in mind that these enclosures are
custom made to fit in this particular vehicle, so the enclosure will fit properly
in only one specific location. Mounting hardware is included to bolt the enclosure
to the floor of the truck.
10" Terminator Subwoofer: This enclosure comes loaded
with a single 10" MTX Terminator woofer. The woofer has an unusual impedance,
specifically designed for the built-in amp, and cannot be replaced with a standard
Class D Amplifier: The enclosure contains a built-in 200-watt
Class D (digital) amplifier that allows RCA or speaker-level input. The amplifier
is highly efficient and designed specifically for use with the subwoofer in the
Electronic Bass Control (EBC): The EBC is a wired remote and
allows you to adjust the bass level from anywhere in the vehicle. Installing the
EBC is optional.
Low-pass Crossover: The low-pass crossover point is adjustable
from 50 to 150 Hz for a seamless transition between the output of this unit and that
of the other speakers in the vehicle.
- Gain Control: rotary control; set the
gain of the amplifier is match the input
- Crossover Control: rotary control;
adjust the crossover from 50 to 150 Hz
Auto Turn-On Feature: When the speaker level inputs are used,
the system will automatically turn on and off with the radio.
Note: The auto turn-on feature does not
operate when the preamp level inputs are used, connecting the
remote turn-on lead is required.
Tools Required: The manual provides this list of required tools:
- Phillips Head Screwdriver
- T50 Torx
- 15mm Socket
- 10mm Socket
- Power Drill
- 6" Ratchet Extension
- 5/16" Wrench
- Wire Crimper
- Wire Cutters
- 3/8" Drill Bit
5 Year Warranty Terms: This product carries a 5-Year
Prorated Warranty with the following terms:
- Years 1-2: Products found to be defective in materials
or workmanship during the first two years will be, at Mitek's option,
repaired or replaced by Mitek at no charge. The warranty period does not
renew, but continues on from the original date of purchase.
- Years 3-5: The purchase price of an item which becomes
defective after the first two years and prior to the end of the warranty
period will be prorated and credited toward the purchase of a new MTX
product. The amount of proration is determined by dividing the original
purchase price by the number of months in the warranty period (60), then
multiplying the result by the number of months remaining in the warranty
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.