Vehicle-Specific Custom Enclosure: This MTX ThunderForm
enclosure is specifically designed to replace the factory console in select
1992-2000 Cadillac, Chevrolet, and GMC Escalade, Suburban, Yukon, Tahoe, and
full-size Blazer models. Please refer to the Crutchfield Car Selector to confirm
fit for your vehicle.
Enclosure: The ThunderForm enclosure is made of molded
high-density polyethylene resin, which dampens resonance and is rigid enough
to resist flexing. The color of the enclosure matches factory GM colors. Three
cup holders (2 for the front and 1 for the rear) and a tray are molded into the
top of the enclosure. It is a down-firing acoustic suspension (sealed) chamber.
Woofer: The ThunderForm enclosure is loaded with a 4-ohm,
10" MTX Terminator woofer.
Mounting Location: This enclosure is designed and molded to
mount between the front bucket seats, replacing the factory console, with the
woofer firing downward. Note: The provided dimensions are taken
at the widest points of the enclosure. Keep in mind that these enclosures are
custom made to fit in this particular vehicle, so the enclosure will fit properly
in only one specific location. Mounting hardware is included to bolt the enclosure
to the floor of the truck.
Tools Required: The manual provides this list of required tools:
- Phillips Head Screwdriver
- T50 Torx
- 15mm Socket
- 10mm Socket
- Power Drill
- 6" Ratchet Extension
- 5/16" Wrench
- Wire Crimper
- Wire Cutters
- 3/8" Drill Bit
Note: The manual provided is for both
the amplified and non-amplified versions of this ThunderForm.
Some of the tools may not be needed for this non-amplified
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to
find elsewhere. That's because we have our own in-house Product Research
team. They verify what’s in the box, check the owner's manual, and record
dimensions, features and specs. We stay on top of new products and technologies
to help people make informed choices.