Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Vehicle-Specific Custom Enclosure: This MTX ThunderForm
enclosure is specifically designed to replace the factory console in select
1992-2000 Cadillac, Chevrolet, and GMC Escalade, Suburban, Yukon, Tahoe, and
full-size Blazer models. Please refer to the Crutchfield Car Selector to confirm
fit for your vehicle.
Enclosure: The ThunderForm enclosure is made of molded
high-density polyethylene resin, which dampens resonance and is rigid enough
to resist flexing. The color of the enclosure matches factory GM colors. Three
cup holders (2 for the front and 1 for the rear) and a tray are molded into the
top of the enclosure. It is a down-firing acoustic suspension (sealed) chamber.
Woofer: The ThunderForm enclosure is loaded with a 4-ohm,
10" MTX Terminator woofer.
Mounting Location: This enclosure is designed and molded to
mount between the front bucket seats, replacing the factory console, with the
woofer firing downward. Note: The provided dimensions are taken
at the widest points of the enclosure. Keep in mind that these enclosures are
custom made to fit in this particular vehicle, so the enclosure will fit properly
in only one specific location. Mounting hardware is included to bolt the enclosure
to the floor of the truck.
Tools Required: The manual provides this list of required tools:
- Phillips Head Screwdriver
- T50 Torx
- 15mm Socket
- 10mm Socket
- Power Drill
- 6" Ratchet Extension
- 5/16" Wrench
- Wire Crimper
- Wire Cutters
- 3/8" Drill Bit
Note: The manual provided is for both
the amplified and non-amplified versions of this ThunderForm.
Some of the tools may not be needed for this non-amplified
5 Year Warranty Terms: This product carries a 5-Year
Prorated Warranty with the following terms:
- Years 1-2: Products found to be defective in materials
or workmanship during the first two years will be, at Mitek's option,
repaired or replaced by Mitek at no charge. The warranty period does not
renew, but continues on from the original date of purchase.
- Years 3-5: The purchase price of an item which becomes
defective after the first two years and prior to the end of the warranty
period will be prorated and credited toward the purchase of a new MTX
product. The amount of proration is determined by dividing the original
purchase price by the number of months in the warranty period (60), then
multiplying the result by the number of months remaining in the warranty