About the MTX Amplified ThunderForm
Crinkled french fries, discarded receipts, old gum wrappers you probably have everything in the hidden corners of your vehicle except great bass. ThunderForm enclosures fill the nooks and crannies of your vehicle with low tones that stand out, but their factory look blends right in.
MTX engineers evaluate the "sonic signatures" of top-selling vehicles so they can design ThunderForms as custom acoustic matches. Each ThunderForm fits and blends inconspicuously into your vehicle, so you get great bass without losing any space. The high-density polyethylene resin enclosure curbs unwanted resonances from your sub, so you'll hear bass that's tight, hard-hitting, and way down low.
This molded MTX ThunderForm comes loaded with a premium-quality 10" Terminator subwoofer and a specially-designed amp that puts out 200 watts RMS of power. It installs inside the factory center console of your 2007-up GMC Yukon, Chevy Suburban, or Chevy Tahoe with bucket front seats. MTX's Electronic Bass Control (EBC) lets you adjust the bass level from the driver's seat. Hardware and harness are included.
Important Note: This enclosure will not work in trucks with AC vents on the back of the center console, or in vehicles with the deep storage area in front of cup holders.
Product highlights:
- custom-fit powered subwoofer
- enclosure fits inside front center console
- one 10" Terminator subwoofer
- built-in 200-watt RMS Class-D amplifier
- high-density polyethylene enclosure
- variable low-pass filter (50-150 Hz at 12 dB per octave)
- Electronic Bass Control
- preamp- and speaker-level inputs
- 20' power harness included
- dimensions: 22-3/5"L x 6-1/2"H x 11"D
- warranty: 2 years
- MFR # CTYSD07FB10A-TN
What's in the box:
MTX Amplified ThunderForm owner's manual
- Tan amplified ThunderForm enclosure loaded with one 10" MTX audio subwoofer and a 20A ATC fuse
- Cloth grille
- Wiring harness (20' power lead/3' ground lead and 3' remote turn-on lead)
- 1 Fuse holder with attached wire loop
- One 20A ATC fuse
- One 0.202" crimp-on ring
- One 0.414" crimp-on ring
- 1 Yellow butt connector
- Two 5' RCA high-level input wires (each wire has an RCA connector on one end and tinned wire on the other end)
- External bass control with attached 17.5' cable (has a right-angle minijack stereo connector)
- 1 Plastic knob (for the external bass control)
- 1 Metal mounting bracket
- Two 3/4" self-tapping screws
- 1 Medium flat washer
- 2 Small flat washers
- 2 Lock washers
- 1 Hex nut
- One 3-3/4" cable tie
- 1 External bass control sticker
- 3 "L" brackets
- 8 Self-tapping screws
- 1 Nylon strap
- 2 Plastic brackets
- 4 mounting screws
- Manual
- Template
Customer reviews for MTX Amplified ThunderForm
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the MTX Amplified ThunderForm
Product Research
Features
Molded Enclosure: The molded, high-density polyethylene resin enclosure resists flexing and dampens resonance.
MTX Audio Subwoofer: The ThunderForm houses a single proprietary 0.35 ohm woofer. The woofer features a long excursion voice coil and is designed to take full advantage of the efficiency of the enclosure's Class D amplifier giving you powerful, low frequency bass extension
Class D Amplifier: The enclosure contains a built-in 200-watt Class D (digital) amplifier that allows RCA or speaker-level input. The amplifier is highly efficient and designed specifically for use with the subwoofers in the enclosure.
Built-in Low-pass Filter: The low-pass filter frequency can be varied from 50 to 150 Hz for a seamless transition between the output of this unit and that of the other speakers in the vehicle.
Auto Turn-On Feature: When the speaker level inputs are used, the system will automatically turn on and off with the radio.
External Bass Control: The external bass control allows you to adjust the bass level from anywhere in the vehicle.
Protection Circuitry: The MTX ThunderForm features over voltage, over current and voice coil short protection circuitry to protect the built-in amplifier and mounted subwoofer.
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...
It fit perfect in my 2008 Chevy Silverado Easy install only problem is we had to cut a stud off were the old sub sat to let the Mtx to set flat
Terry from Jacksonville il