Vehicle-Specific Custom Enclosure: This MTX ThunderForm enclosure
is specifically designed to fit select 1997-2004 Dodge Dakota Club Cab (extended cab)
pickups. Please refer to the Crutchfield Car Selector to confirm fit for your vehicle.
Enclosure: The ThunderForm enclosure is made of molded high-density
polyethylene resin, which dampens resonance and is rigid enough to resist flexing. It
is an acoustic suspension (sealed) chamber.
Mounting Location: This enclosure is designed and molded to mount
under the rear seat; it replaces the factory tool tray. The jack is relocated to
a cavity molded into the ThunderForm. Like the factory tool tray, the ThunderForm
has a cup holder on each side. Note: The provided dimensions are
taken at the widest points of the enclosure. Keep in mind that these enclosures are
custom made to fit in this particular vehicle, so the enclosure will fit properly
in only one specific location.
Woofers: The ThunderForm enclosure is loaded with two 8Ω,
10" MTX Terminator subwoofers. The subwoofers are wired in parallel to a single
terminal, presenting a 4Ω load to your amplifier.
Tools Required: The manual provides this list of required tools:
- Phillips Head Screwdriver
- T50 Torx
- 10mm Socket
- 1/4" Socket
- 11/32" Socket
- 6" Ratchet Extension
- Wire Crimper/Cutters
- Panel Removal Tool
Note: The manual provided is for both
the amplified and non-amplified versions of this ThunderForm.
Some of the tools may not be needed for this non-amplified
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to
find elsewhere. That's because we have our own in-house Product Research
team. They verify what’s in the box, check the owner's manual, and record
dimensions, features and specs. We stay on top of new products and technologies
to help people make informed choices.