About the MTX FPR12-02
Shallow sub, intense bass
Shallow sub, intense bass
MTX built the FPR12-02 subwoofer to give you big bass in a vehicle that that doesn't have room for traditional large subwoofers. This sub comes in at only 3-3/8" deep, so it mounts in low-profile enclosures that'll fit almost anywhere. This sub handles up to 400 watts RMS, and delivers the kind of powerful performance that you'd usually only experience with a traditional sub. Its 2-ohm impedance makes it a great match for your mono amp.
Durable design
You can push the FPR12-02 hard, and it's built to survive in the tough car environment. A lightweight aluminum dustcap protects the polypropylene cone, while the rugged rubber surround offers long-lasting durability. MTX's unique Spider Plateau Venting keeps your subwoofer running cool during intense jam sessions. This sub requires a sealed box.
Product highlights:
- 12" shallow-mount subwoofer with single 2-ohm voice coil
- polypropylene woofer cone with rubber surround
- power range: 200-400 watts RMS (800 watts peak power)
- frequency response: 22-150 Hz
- sensitivity: 83 dB
- top-mount depth: 3-3/8"
- sealed box volume: 0.84 cubic feet
- warranty: 2 years
- MFR # FPR12-02
What's in the box:
- One 12" Subwoofer
- Specification sheet
Customer reviews for MTX FPR12-02
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the MTX FPR12-02
Features & specs
Features and Specs | ||
---|---|---|
Size | 12 -inch | |
Impedance (Ohms) | --- | |
Cone Material | Polypropylene | |
Surround Material | Rubber | |
Port diameter (inches) | N/A | |
Port length (inches) | N/A | |
Free-Air | No | |
Dual Voice Coil | No | |
Sensitivity |
89.3 dB at 2.83 volts 83 dB at 1 watt | |
Frequency Response | 22 - 150 Hz | |
Max RMS Power Handling | 400 | |
Peak Power Handling (Watts) | 800 | |
Top Mount Depth (inches) | 3 3/8 | |
Bottom Mount Depth (inches) | N/A | |
Cutout Diameter or Length (inches) | 11 1/16 | |
Frame Width | 12.655 | |
Frame Length | 12.655 | |
Vas (liters) | 43.67 | |
Fs (Hz) | 29.4 | |
Qts | 0.77 | |
Xmax (millimeters) | 13 | |
Parts Warranty | 2 Years | |
Labor Warranty | 2 Years | |
Box Requirements | ||
Ideal Sealed Box Volume (cubic feet) | 0.84 | |
Minimum Sealed Box Volume (cubic feet) | N/A | |
Maximum Sealed Box Volume (cubic feet) | N/A | |
Ideal Ported Box Volume (cubic feet) | N/A | |
Minimum Ported Box Volume (cubic feet) | N/A | |
Maximum Ported Box Volume (cubic feet) | N/A |
Product Research
Features
Shallow Mount Design: The MTX Thunder Flat Piston Round (FPR) subwoofers are designed for applications where space is a premium. They are optimized to perform best in a sealed enclosure, no matter what type of music you listen to. The recommended enclosure design (0.84 cubic feet) was tested by the MTX engineering team. The subwoofer uses a polypropylene cone with an aluminum dustcap.
Specifications:
- Fs (resonant frequency): 29.4 Hz
- Qms (mechanical Q at Fs): 5.45
- Cms (suspension compliance): 0.105 mm/N
- Mms (diaphragm/coil mass, including acoustic load): 279.17 g
- Rms (suspension's mechanical resistance): 9.59 kg/s
- Vas (equivalent compliance volume): 43.67 liters
- Xmax (maximum linear peak): 13 mm
- D (cone diameter): 10.35"
- Sd (cone area): 543.3 cm² (0.05433 m²)
- Vd (peak displacement volume): 0.7051 liters
- Qes (Electrical Q at Fs): 0.90
- Re (voice coil DC resistance): 1.75 Ω
- Bl (force factor): 10.00 Tm
- Qts (total Q at Fs): 0.77
- η0 (reference efficiency): 0.114%
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Just installed this sub because i had a 10 inch and needed more bass and it delivered. The sub sounds clear with a lot of bass i love it.
kert from California