by Crutchfield's Jon Paul

A handy hub for your powersports audio system

A quality receiver is the centerpiece of any proper audio system, right? Of course it is. But what if you really don't have the space (or the desire) to install a new receiver in your vehicle? Does that mean you're stuck listening to an MP3 player through a set of cheap earbuds every time you head out in your small boat, ATV, side-by-side, or golf cart?

KEEP READING

A handy hub for your powersports audio system

Works with lots of Bluetooth devices

MTX's MUDBTRC Bluetooth receiver gives you the music you want without putting you through the trouble of installing a new head unit.This universal remote control is designed to work with most Bluetooth-enabled devices, including iPhone® and Android® smartphones and tablets. It's an easy-to-install, easy-to-use way to turn your Bluetooth device into the hub of your system.

You can surface- or flush-mount the MUDBTRC, or just clamp it to a roll bar using the included hardware.This weatherproof device will work in or on a variety of vehicles and will connect with almost any amplifier, so it's the ideal audio solution for motorcycles, side-by-sides, boats, or even cars and trucks.

Bluetooth note: Use of this receiver's Bluetooth features will depend upon your phone's Bluetooth capabilities. Learn more in our article explaining Bluetooth profiles.

READ LESS

Product highlights:

Bluetooth receiver with control panel
ideal for use in boats, ATVs, side-by-sides, golf carts, cars, and trucks
works with most amps
three mounting options: surface, flush, or clamp
weatherproof design
five big front-panel touch controls
works with most Bluetooth devices, including smartphones and tablets
hassle-free Bluetooth pairing
includes power, ground, and output connections
3.5mm auxiliary output for connecting to amplifier
mounting hardware included
warranty: 2 years
MFR # MUDBTRC

What's in the box:

MTX MUDBTRC owner's manual

Bluetooth remote/receiver (attached 3' power/ground harness)
Flush-mount bracket
Surface-mount bracket
2 Mounting clamps
2 Screws
Hex-nut
Two-side tape
Owner's Manual

Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.

See the difference between "Open Box" and "Scratch & Dent" Outlet items

Loading reviews...

Average review:

15 reviews

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Filter by rating

filterStar

Customer photos

Customer provided image, click to load a larger version.

Verified customer

Verified employee review

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Have questions for

Crutchfield response

Was this helpful?

<< >>

Researched by Crutchfield's Stacey B.

Product Research

Features

Add-On Bluetooth Receiver & Remote Control: The MTX Audio MUDBTRC is a universal Bluetooth receiver & remote control that is designed to work with most Bluetooth enabled devices including iPhone and Android smartphones and tablets. This easy to install and use, all-in-one unit is capable of transforming your Bluetooth enabled mobile device into the center of your vehicle's audio system. Designed to mount a variety of vehicles and able to work with most amplifiers, the MUDBTRC is ideal for use in boats, ORV's, ATV's, motorcycles, side-by-sides, boats, cars, or trucks.

Bluetooth Music Streaming: The MUDBTRC Bluetooth receiver & remote allows you to stream music directly from your Bluetooth-enabled Apple iPod/iPhone/iPad, Android smartphone/tablet, and other Bluetooth compatible devices to your vehicle's existing stereo system. You can operate basic playback functions (such as Play/Pause & Previous/Next Track) from the MUDBTRC's push-button controls.

Aux Output: The MTX Audio MUDBTRC features a female minijack (3.5mm) audio output to connect to an Aux or analog audio input of your amplifier. You will need either a stereo minijack cable or a stereo minijack-to-RCA cable (sold separately).

Push-Button Controls: The MTX Bluetooth receiver & remote features push-button controls which allow you to power on/off the device, turn the volume up/down, and operate basic playback functions (like Play/Pause & Previous/Next Track) of your connected Bluetooth audio device.

Mounting Options: The MTX Audio MUDBTRC offers 3 mounting options - surface mount, flush mount, and spring clamp. The flush-mount bracket requires a cutout of 2.5625" and a mounting depth of approximately 1.4375".

Wiring Harness: The MUDBTRC can be used with practically any 12-volt battery. The Bluetooth remote/receiver has three wires in its wiring pigtail. The power wire (red) should be directly connected to the vehicles positive battery terminal, the ground wire (black) should be connected directly to the vehicle's chassis where paint has been removed or the negative terminal on the battery, and the accessory wire (blue) should be connected to the ignition wire on the vehicle.

Loading accessories...

16 questions already asked

Can you have one at the helm and one at the rear of the boat so you can reach it why you are in the water?

richard Sep 18, 2023

1 answer

Greetings Richard. Great question. Here is why I think it would be a bit of a problem, but technically would work. Pairing the phone. A phone can only be paired to one of these at a time. You would have to re-pair the phone to the receiver to be used, then re-pair to the next. Not real convenient, especially if they are within 30 feet of each other.

hogan Sep 19, 2023 (Staff)

will this power on and control a MUDSYS46 sound bar?

chris Jul 10, 2023

1 answer

Greetings Chris, and thank you for your question. Unfortunately not. This MUDBTRC is an actual Bluetooth receiver to be used with an existing stereo that does not have Bluetooth, but an Aux in. It will not emit commands to another device via Bluetooth, just receive information from your phone, or tablet.

hogan Jul 11, 2023 (Staff)

Does this connect to MUD100-4 with just the Y-adapter? I have a 4 speaker system, do I need additional cables to the amp?.

ralph Jun 06, 2022

1 answer

This sweet Bluetooth controller has a 3.5mm female Aux output, and they do not include adapters in the box. You can use this with the MUD100-4, or any amplifier by using a 3.5 to RCA breakout cable like this Fusion in the link below. Since the MUD does not have a 2 channel input capability, you'll also need 2 of these marine rated female RCA to dual male RCA adapters for the amp's signal inputs. That should get you sorted! https://www.crutchfield.com/p_917BCRCA35/Fusion-MS-CBRCA3-5.html https://www.crutchfield.com/p_142RMM/EFX-Rogue-Y-Adapter.html

bo Jun 06, 2022 (Staff)

What color is the backlighting?

shawn Oct 21, 2020

1 answer

Red. You cannot see it during the day, only at night.

ryan Oct 21, 2020

The instructions say to wire the blue lead directly to the amp remote turn on (blue) and a remote turn on is not needed because the MTX will turn off after 5 minutes if no bluetooth is detested. That sounds nice but if you forget to turn off your phone or playing device it could drain the battery. Can i still wire the blue wire from the MTX and the amp to a remote turn on to have more control of the both the system?

chris Sep 30, 2020

1 answer

If you purchased the product from Crutchfield, feel free to contact our Tech Support team. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer.

kristina Oct 15, 2020 (Staff)

Will the MTX MUDBTRC work with the MTX MUD6SPBT?

robert Sep 11, 2020

1 answer

Unfortunately I cant help. I used it with a etereo on a motorcycle which I have since moved to bluetooth..... good luck.

gary Sep 11, 2020

What is output voltage ?

anthony Aug 19, 2020

1 answer

No output voltage. Just amplifier pre-outs. You cannot power speakers from this interface. You will need an external amplifier to power your speakers.

ryan Aug 19, 2020

Does this unit has a plug that could be conectes to the factory radio in order to simplify it's installation for my Suzuki Grand Vitara 2009?

dámaso Sep 09, 2018

1 answer

The unit has a Power, Ground, Remote turn on for an amplifier, and RCA connections. The unit does not have any factory plugs for OEM stereos.

john Sep 17, 2018

Can I wire this to a simple stereo receiver I have in my bathroom using the RCA input to control it or does it need to just be a power amp to work?

robert Jan 10, 2018

4 answers

It needs to be to some sort of amp because this unit is strictly a Bluetooth receiver/controller

jason d Jan 13, 2018

It needs power from somewhere...mine is on my harley and draws from the battery

eric Jan 10, 2018

This is not a receiver, it accepts Bluetooth or an input from a 3.5mm plug (I think). This unit then connects to an amp with RCA cables.

lee Jan 10, 2018

You will have to get a adapter from 3.5mm plug to rca. It should work. It is just a Bluetooth receiver and controller.

cris Jan 10, 2018

can this be hooked up to 2 amps at once?

jones May 08, 2017

1 answer

It offers a single 3.5mm stereo audio output so, you would need a minijack to RCA cable and some RCA Y adapters to provide the audio to more than one amplifier.

ryan May 13, 2017 (Staff)

Does this product have any back lighting to be able to see it at night in my side by side?

jason d Dec 08, 2016

2 answers

Yes, i own this and it works very well. It does have backlighting.

jarrett Dec 09, 2016

Yes it does light up with backlighting once it's powered up.

dustin Dec 09, 2016

Is this product compatible with a JVC Head unit (KDR730BT)? I'm looking for a remote for said head unit without having to get a new head unit (if I can avoid it). thanks!

nick Apr 06, 2016

1 answer

No. The MTX is designed to be a stand-alone device and connect directly to the inputs of an external amplifier. Your JVC came packaged with a wireless remote originally (RM-RK52). If you need a replacement, you may be able to get one from JVC': 800-252-5722 I hope that helps! My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=5

ryan Apr 11, 2016 (Staff)

Can this device be used with the aux input connection on the front of a 2013 Harley Street Glide?

james Nov 22, 2015

1 answer

Sure. It's designed to be a direct source input to an external amplifier but you can connect it to an auxiliary audio input on your stereo. The only drawback to this will be the two volume controls: one on the MTX and one on your stereo. So, you'll just have to balance these two settings to ensure proper performance. I hope that helps!

ryan Nov 27, 2015 (Staff)

IS THERE A PRODUCT SIMILAR TO THIS ONE THAT DOES THE BLUETOOTH AS WELL AS HAVE AN AUX INPUT TO CONNECT IPOD OR PHONE DIRECT?

tom Oct 06, 2015

1 answer

I forwarded your question to an Advisor and they responded with the following: The closest match that offers the functionality you require is the Dual MGH30BT marine receiver. In addition to Bluetooth, it has a rear-mounted USB for direct connection and control of an iOS device. If you would like to discuss further you can contact an Advisor directly by phone (1-800-324-9695) or online chat.

kristina Oct 11, 2015 (Staff)

Was is the IPV Waterproof rating (3 or 6)?

andrew Jun 30, 2015

1 answer

I forwarded your question to an Advisor and they responded with the following: MTX has not provided information about the waterproof rating, however, I did notice on their website it lists the item as "weather-proof" rather than "water-proof". I can say that it will likely hold up as well as any marine amp. If you would like to discuss further you can contact an Advisor directly by phone (1-800-324-9695) or online chat.

kristina Jul 05, 2015 (Staff)

What size bar is the mounting clamp for? i.e. 1", 3", etc.

clint w. Jun 24, 2015

1 answer

two bar clamps. one is 7/8" and other is 1 1/8" They are thin metal so fairly flexible.

brenden Jun 24, 2015

SHOW MORESHOW LESS

Loading articles...