About the MTX ThunderForms
Crinkled french fries, discarded receipts, old gum wrappers — you probably have everything in the hidden corners of your vehicle except great bass. ThunderForm enclosures fill the nooks and crannies of your vehicle with low tones that stand out, but their factory look blends right in.
MTX engineers evaluate the "sonic signatures" of top-selling vehicles so they can design ThunderForms as custom acoustic matches. Each ThunderForm fits and blends inconspicuously into your vehicle, so you get great bass without losing any space. The high-density polyethylene resin enclosure curbs unwanted resonances from your sub, so you'll hear bass that's tight, hard-hitting, and way down low.
This molded MTX ThunderForm comes loaded with two premium-quality 10" Terminator subwoofers, and mounts under the rear bench seat of your select 2004-up Nissan Titan King or Crew Cab pickup. The enclosure is seamless and airtight, with the correct internal volume to yield optimum bass response from the subwoofer. For the ultimate in thundering bass, drive one with an MTX Thunder amplifier.
Product highlights:
- custom-fit subwoofer
- rugged enclosure fits under rear bench seat
- two 10" 4-ohm Terminator subwoofers
- high-density polyethylene enclosure
- power range 100-400W RMS
- frequency response 41-150 Hz
- dimensions: 53"W x 9"H x 12-1/2"D
- warranty: 2 years
- MFR # NTTNK04C20-TN
What's in the box:
MTX ThunderForms owner's manual
- ThunderForm enclosure loaded with two 10" Terminator subwoofers
- Mounting hardware
- Installation instructions
Customer reviews for MTX ThunderForms
Loading...
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the MTX ThunderForms
Product Research
Features
Vehicle-Specific Custom Enclosure: This MTX ThunderForm enclosure is specifically designed to fit select Nissan Titan King Cab and Crew Cab pickups. Please refer to the Crutchfield Car Selector to confirm fit for your vehicle.
Enclosure: The ThunderForm enclosure is made of molded high-density polyethylene resin, which dampens resonance and is rigid enough to resist flexing. It is an acoustic suspension (sealed) chamber.
Mounting Location: This enclosure is designed to mount under the rear seat. The jack stays in the factory location. Note: The provided dimensions are taken at the widest points of the enclosure. Keep in mind that these enclosures are custom made to fit in this particular vehicle, so the enclosure will fit properly in only one specific location.
Woofers: The ThunderForm enclosure is loaded with two 8Ω, 10" MTX Terminator subwoofers. The subwoofers are wired in parallel to a single terminal, presenting a 4Ω load to your amplifier.
Tools Required: The manual provides this list of required tools:
- Powered Screwdriver
- #2 Phillips Head Bit
- 6" Bit Extension
- 10mm Socket
- Socket Wrench
- Wire Cutters
The MTX ThunderForms replaces these items
MTX ThunderForm
- rugged enclosure fits under rear bench seat
- two 10" Thunder4500 subwoofers
- power range 100-450W RMS
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...