Features
Enclosure Compatibility
Warranty

Features

Dual 4-ohm Voice Coils: This woofer features dual 4-ohm voice coils, offering wiring flexibility. When the voice coils are wired in parallel the woofer presents a 2-ohm load. When the voice coils are wired in series the woofer presents an 8-ohm load.

Terminals: The woofer features two pair of heavy-duty spring post terminals which can accept single banana plugs, pin connectors, or bare wire up to 10-gauge.

Spider Plateau Venting: Heat from the voice coil is vented through vents that surround the back of the spider. As the woofer travels back and forth, cool air is pulled in and heated air is pushed out.

Asymmetrical Linear Drive System (ALDS): The Asymmetrical Linear Drive System consists of a flat, progressive spider that improves suspension and an extended pole piece that smoothes out the cone's linear motion. The result is high output and low distortion.

Enclosure Compatibility

Sealed Box: For the best possible sound quality where space is a premium MTX recommends a sealed enclosure with an internal volume of 1.0 ft³. Sealed enclosures provide the most control over a woofer, will handle a lot of power, and provide accurate sonic reproduction, making them suitable to all types of music.

Vented Box: The recommended vented box has a net internal volume of 2.32 ft³ with a slotted port 13-3/4" x 2-1/2" x 28-3/4". Vented (or ported) enclosures typically provide better overall efficiency than sealed so they are suitable for use with smaller amplifiers, giving you more bass output from less power.

Warranty

5 Year Warranty Terms: This product carries a 5-Year Prorated Warranty with the following terms:

• Years 1-2: Products found to be defective in materials or workmanship during the first two years will be, at Mitek's option, repaired or replaced by Mitek at no charge. The warranty period does not renew, but continues on from the original date of purchase.
• Years 3-5: The purchase price of an item which becomes defective after the first two years and prior to the end of the warranty period will be prorated and credited toward the purchase of a new MTX product. The amount of proration is determined by dividing the original purchase price by the number of months in the warranty period (60), then multiplying the result by the number of months remaining in the warranty period.