About the MTX Terminator65
It's time to upgrade
An inline crossover eliminates the need to install an outboard crossover in your door.
It's time to upgrade
MTX is looking out for you. They designed the Terminator Series speakers to put out serious sound without you having to empty your bank account. If you've been dying to replace your burned-out factory speakers with a component system, but haven't been able to justify the expense, MTX takes guilt out of the equation.
What a speaker
These Terminator65 6-1/2" component speakers will take your in-car audio experience to the next level. The durable polypropylene woofer and Mylar tweeter are vast improvements over the standard paper cones used by factory speakers. With the sensitivity of these new materials, you'll gain more focus in the midrange and clearer highs, even from the power of a factory stereo. But if you have an aftermarket stereo or amp, you can listen with confidence since these puppies can handle up to 45 watts RMS. Grilles are included for a custom installation.
Installation note: You'll need a pair of our universal backstraps to install the tweeters in the factory locations.
Highlights:
- component car speaker system includes two woofers and two tweeters
- 6-1/2" polypropylene woofer cone
- 1" Mylar tweeter with inline crossover
- frequency response: 54-20,000 Hz
- sensitivity: 89 dB
- RMS power: 2-45 watts (90 watts peak)
- top-mount depth: 2"
- grilles included
- warranty: 2 years
- MFR # TERMINATOR65
What's in the box:
MTX Terminator65 owner's manual
- 2 Woofers
- 2 Tweeters (4" wire attached)
- 2 Metal woofer adapter rings
- 2 Woofer grilles
- 2 Flush mount tweeter housings
- 2 Surface mount tweeter housings
- 2 Angled tweeter mounting housings
- Two 6" Speaker wires (each with quick slide terminals on one end and bare wire on the other)
- 2 Tweeter flush mounting clips
- Four 5/8" Screws
- Eight 1" Screws
- Two 1-3/8" Screws
- 10 Speed clips
- Eight M3x4mm Machine screws
- Mounting diagram
- Warranty information
- Specifications printed on the box
Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Customer reviews for MTX Terminator65
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the MTX Terminator65
Features & specs
General | ||
---|---|---|
Speaker Size | 6 1/2 | |
Design | 2-way | |
Tweeter Design | 1" Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Mylar | |
Woofer Composition | Polypropylene | |
Woofer Surround | Rubber | |
Parts Warranty | 2 Years | |
Labor Warranty | 2 Years | |
Specifications | ||
Sensitivity (1W at 1 meter) | 84.7 | |
Sensitivity at 2.83 volts | 89 | |
Frequency Response | 54 - 20k Hz | |
Minimum RMS Wattage | 2 | |
Maximum RMS Wattage | 45 | |
Peak Power Handling (Watts) | 90 | |
Top-mount Depth (Inches) | 2 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 5 1/16 | |
Mounting Height (Inches) | 0.488 | |
Frame Width | 6.241 | |
Frame Length | 6.241 |
Product Research
Features
Woofer Cones: The MTX Terminator series speakers feature durable and rigid polypropylene woofer cones. Polypropylene is also resistant to the moisture and temperature extremes found in automotive applications.
Woofer Mounting: MTX calls the Terminator65 woofers 6-1/2. They fit into standard 6-3/4 and 6-1/2 openings, but the bolt pattern is 6-3/4. In most 6-1/2 applications, new screw holes must be drilled.
Tweeter Mounting Options: The tweeters can be flush mounted, angled mounted (semi-flush), or surface mounted using the included hardware. Once flush mounted or surface mounted, the tweeter will pivot approximately 10° in any direction.
Tweeter Dimensions:
Frame Diameter | Cutout Diameter | Mounting Height | Mounting Depth | |
---|---|---|---|---|
Flush Mount | 1.843" | 1.643" | 0.220" | 0.841" |
Angled Mount | 2.125" x 1.752" | 1" x 1.355" | 1.01" | 0.35" |
Surface Mount | 1.888" | N/A | 0.984" | Screw Depth |
Crossovers: The high pass crossovers are built into the tweeter frames.
Specification Note: MTX seems to list contradicting power specifications on the box; with the other specifications they list 90 watts peak, but on the front of the box they list 135 watts max power. We've adopted the 90 watt rating simply because it's the more conservative figure.
Loading...
Loading accessories...
Customer Q&A
3 questions already asked
Loading...
Loading articles...
Sound amazing, I would recommend to anyone. Great sound balance between woofer and tweeter. Does have built in cross over in the tweeter so no worries of where to put an extra box.
Cameron from Lafayette, IN