1.888.955.6000
crutchfield.com
Crutchfield

MTX TH350.1D

TH Series mono sub amplifier — 350 watts RMS X 1 at 1 ohm

Zoom
  • MTX TH350.1D

    Front

  • MTX TH350.1D

Crutchfield OMC logo
We don't check this item for fit or compatibility.
 

Our take on the MTX TH350.1D

by Buck Pomerantz
MTX

My system has plenty of power. Who needs an amp?

You might think you don't need an amp because you have a 400-watt system in your car, or because your new stereo puts out 50 watts a channel. But those are peak wattage ratings, which may boil down to 15 or 20 watts per channel, using the more realistic RMS rating. An amp sends your speakers the power they need to deliver your music with clarity and impact, whether you're using factory speakers or high-performance components. And low-frequency reproduction requires lots of power, so an amp is an absolute must if you're adding a sub to your system.

MTX muscle from a TH Series amp

If you're addicted to great bass, then you know that MTX has been building great amps and subs for decades. Their TH350.1D mono amp mixes the latest advancements in amp technology with MTX know-how to bring you strong, clean power that you can rely on — day in and day out. This TH Series amp delivers up to 350 watts to your subwoofer system, with some cool features that'll make your life easier.

Flexibility and reliability

The TH350.1D can handle multiple subs, operating safely with loads as low as 1 ohm. What's this mean to you? You can send 125 watts RMS to a single 4-ohm sub right now, but you won't have to sell your amp when you add more subs later on. This 1-ohm stability gives you a little more flexibility as your system changes over time. And, speaking of time, MTX designs their amps for reliability. All internal wiring is as short as possible, for the purest reproduction with low noise. And you'll find a handy clip light that helps you set your gain properly, so you know you're getting the cleanest bass possible.

TH350.1D mono amp

Tuning your bass

MTX includes a number of tools for tuning your bass. The low-pass filter sets up a 24 dB per octave wall that stops higher frequencies from reaching your sub. You can also adjust the subsonic filter to remove the extreme low frequencies, which helps your sub play louder and improves the performance of many enclosures. And this amp also features an old school bass boost, which allows you to kick in up to 12 dB of bump at 40 Hz for max bass when you need it. MTX includes a wired remote, so you can adjust the bass level from your front seat.

See more info on this item

Highlights:

  • mono subwoofer amplifier
  • 125 watts RMS x 1 at 4 ohms (250 watts RMS x 1 at 2 ohms)
  • 350 watts RMS x 1 at 1 ohm
  • CEA-2006 compliant
  • frequency response: 20-200 Hz
  • adaptive Class D amp technology
  • variable low-pass filter (40-200 Hz, 24 dB/octave)
  • variable subsonic filter (20-50 Hz, 12 dB/octave)
  • variable bass boost (0-12 dB at 40 Hz)
  • External Bass Control included
  • clip light helps set gain
  • preamp and speaker-level inputs
  • Smart Engage turns on amp when signal arrives through the speaker-level inputs
  • fuse rating: 30A
  • 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
  • 10-1/8"W x 2-1/16"H x 7-5/8"D
  • warranty: 5 years (free repair or replacement for 2 years; prorated replacement for years 3 through 5)
  • Our 60-day money-back guarantee

Hands-on research from the Crutchfield Labs (what are the Labs?)

Features and Specs
Performance
RMS Power Output (Watts x Channels)
Loading...
125 x 1
Peak Power Output (Watts x Channels)
Loading...
750 x 1
Power at 2 Ohms (Watts x Channels)
Loading...
250 x 1
Bridged Power (Watts x Channels)
Loading...
---
Minimum Impedance Bridged
Loading...
N/A
Minimum Impedance Unbridged
Loading...
1
Best Frequency Response
Loading...
20-200 Hz
THD at Rated RMS Power
Loading...
1%
Signal to Noise Ratio
Loading...
75 dB
Input Voltage
Loading...
14.4v
Features
Amplifier Class
Loading...
D
Low-Pass Crossover Frequency
Loading...
40-200 Hz
Low-Pass Slope (dB/octave)
Loading...
24 dB/oct
High-Pass Crossover Frequency
Loading...
N/A
High-Pass Slope (dB/octave)
Loading...
N/A
Bass Boost
Loading...
0-12 dB
Bass Boost Frequency
Loading...
40 Hz
Fan Cooled
Loading...
No
Fuse Rating
Loading...
40
Speaker Level Inputs
Loading...
RCA
Preamp Outputs
Loading...
No
Width (inches)
Loading...
10-1/8
Height (inches)
Loading...
2-1/16
Depth (inches)
Loading...
7-5/8
Parts Warranty
Loading...
5 Years (3-5 Prorated)
Labor Warranty
Loading...
5 Years (3-5 Prorated)
Product Research
What's in the box?

Download owner's manual

  • Mono amplifier with one 40A ATO fuse installed
  • Two 10' speaker-level input wires (with RCA plug on one end and bare wire on the other)
  • Electronic Bass Control (EBC) module
  • 16' EBC cable (with RJ-25 plugs on each end)
  • Owner's Manual (En/ Fr/ Sp/ Po)

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features
Connections
Warranty

Features

Overview: The MTX TH350.1D is a mono block Class D amplifier. It has anodized aluminum heatsinks to dissipate heat generated by the amplifier. The amp produces 125 watts RMS x 1 at 4 ohms, and 250 watts RMS x 1 at 2 ohms.

1 Ohm Stable: The TH350.1D is stable down to 1 ohms. At 1 ohms, the power output is 350 watts x 1.

Protection Circuits: The TH350.1D provides protection against overheating and electrical short circuits.

Gain: The amp's rotary gain control is continuously variable from 250mV to 5V to match the output of the source unit.

Crossovers: The amp features a built-in low-pass crossover, with a continuously variable cutoff frequency of 40-200Hz. It has a slope of 24dB/oct. In addition, the amp has a subsonic filter, which cuts ultra-low frequencies to minimize wasted power and protects speakers not capable of reproducing those frequencies. It has a variable crossover frequency of 20-50Hz, and a slope of 12dB/oct. Both filters are non-defeatable.

Bass Boost: The TH350.1D's bass boost circuit is variable from 0 to +12dB, and centered at 40 Hz.

Electronic Bass Control (EBC): The amplifier comes with the Electronic Bass Control (EBC) module that allows you to adjust the gain of the amplifier from the front of the vehicle. The EBC comes with a 16' cable which plugs into the RJ-25 jack on the amplifier.

Smart Engage: When the speaker-level inputs are used, the amplifier will automatically power on when voltage is detected on the input. No separate Remote Turn-on lead is required. This is especially convenient when adding an amplifier to a factory system without RCA outputs, or when adding an amp and sub in the trunk and you don't want to remove the head unit.

Connections

Line Level Input/Output: The line-level signals from the source unit are input using the stereo RCA inputs. The amp does not offer a line-level output.

Speaker-level Inputs: If the source unit lacks RCA outputs, such as a factory head unit, you can splice the two supplied speaker-level input wires into the head unit's speaker wires, and then plug them into the stereo RCA inputs.

Power Terminals: The TH350.1D features set screw terminals for power, ground and remote turn-on. The power and ground terminals will accommodate up to 4 AWG wire, while the remote turn-on terminal will accept up to 10 AWG wire. The set screws can be loosened or tightened with the supplied Allen wrenches. MTX recommends the use of 4 AWG power and ground wires with the TH350.1D.

Speaker Connections: The amplifier is equipped with set screw terminals for the speaker outputs. The terminals will accommodate up to 8 AWG wires, and can be loosened or tightened with the supplied Allen wrench.

EBC Port: The amp has a RJ-25 modular phone jack for plugging in the supplied Electronic Bass Control (EBC) module. The EBC comes with a 16' cable, allowing you to control the gain of the amp from the front of the vehicle.

Warranty

5 Year Warranty Terms: This product carries a 5-Year Prorated Warranty with the following terms:

  • Years 1-2: Products found to be defective in materials or workmanship during the first two years will be, at Mitek's option, repaired or replaced by Mitek at no charge. The warranty period does not renew, but continues on from the original date of purchase.
  • Years 3-5: The purchase price of an item which becomes defective after the first two years and prior to the end of the warranty period will be prorated and credited toward the purchase of a new MTX product. The amount of proration is determined by dividing the original purchase price by the number of months in the warranty period (60), then multiplying the result by the number of months remaining in the warranty period.
 
Review this product
Great Gear Giveaway rewards card

Submit a review and then enter to win a $500 rewards card

MTX TH350.1D Reviews

Average Customer Review:

4 people say:

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left
Filter by rating:
5 out of 5

Great product

Written By Rossb6, Warren,PA on Tuesday, January 28, 2014
Crutchfield Customer Review (What's this?)
 
I us a Rockford Fosgate PS2 and this amp powers it well. it came with a wired remote gain adjuster that you can run from your amp to drivers seat and is very easy and useful.
Pros:
The gain adjuster that it comes with is absolutely awesome and very useful! made of metal and is very high build quality. It looks very cool and high tech but is quite simple and easy to use. lots of setting so you can make your sub sound just how you want it to.
Cons:
none that I have found.
Was this review helpful?    Yes | No
 
5 out of 5

Amp

Written By Yeappers, Lake city fl on Thursday, August 01, 2013
Crutchfield Customer Review (What's this?)
 
Great little amp drives 12" kicker free air sub better than cadillac factory sub amp
Pros:
Came with remote gain control
Cons:
Did not come with power and groud wire so had to make a trip to wally world
Was this review helpful?    Yes | No
 
5 out of 5

great item

Written By ngeiman2002, houston tx on Sunday, June 09, 2013
Crutchfield Customer Review (What's this?)
 
this is a great amp for something small like an 8 or a 10'' sub crutchfield knows there stuff trust in them mtx has never failed me i bought this amp to replace a 15 year old mtx that had seen better days great sound deep bass.
Pros:
easy to set up wiring was nice also the input areas where constructed good even the screw down points had a lot of metal to grip on
Cons:
none
Was this review helpful?    Yes | No
 
4 out of 5

MTX TH350.1D

Written By quster, st.louis mo. on Friday, March 08, 2013
Crutchfield Customer Review (What's this?)
 
This amp does it!! I have it running a 1.4 ohm Bose sub in my 95 Yukon and the sound is really good and I ordered another of These little power amps for my other Bose sub. This amp also Keeps cool so covering this amp won't cause a problem.
Pros:
Stays cool , small
Cons:
Wish it had precise lp filter scale on the adjustment.
Was this review helpful?    Yes | No
"Coolness Factor"
Build Quality
Ease of Use
Sound Quality
Value
 

Add accessories for the MTX TH350.1D

You'll need an amp wiring kit to install your new amplifier, as wiring is not included. See all categories & accessories

T-Spec 4PK Installation Kit 4-gauge amplifier wiring kit — includes speaker wire
3 people say
Your Price: $89.99
Add to Cart
Rockford Fosgate RFK4X Complete 4-gauge amplifier wiring kit
Includes patch cable and speaker wire
12 people say
Your Price: $159.99
Add to Cart
Rockford Fosgate RFK4 4-gauge amplifier power wiring kit
10 people say
Your Price: $114.99
Add to Cart
EFX PA4BX Wiring Kit 4-gauge amplifier wiring kit — includes 2-channel patch cable
1 person says
Your Price: $79.99
Add to Cart
T-Spec 16-gauge Speaker Wire Black/white jacket — priced per foot
11 people say
Your Price: $0.69
Add to Cart
T-Spec 12-gauge Speaker Wire Black/white jacket — priced per foot
27 people say
Your Price: $1.99
Add to Cart
Stinger PRO Series 16-gauge Speaker Wire Black jacket — priced per foot
46 people say
Your Price: $0.39
Add to Cart
T-Spec 2-Channel RCA Patch Cables Available in 7 different lengths (20-foot)
23 people say
Your Price: $20.99
Add to Cart
52 people say
Your Price: $9.99
Add to Cart
T-Spec Capacitor 1.5-farad capacitor with red LCD meter
9 people say
Your Price: $79.99
Add to Cart
Metra Crimp Tool and Connectors Package contains crimp tool and over 150 pieces
15 people say
Your Price: $19.99
Add to Cart
Bojo Trim Panel Tools Set of 6 pry tools — helps remove interior and exterior trim and door panels
51 people say
Your Price: $24.99
Add to Cart
S&G Wire Cutter/Stripper Tool Cuts and strips 12- to 22-gauge wire
14 people say
Your Price: $19.99
Add to Cart
Pro.Fit Wire Worm Installation tool helps route wiring through tight spaces
28 people say
Your Price: $12.99
Add to Cart
S&G Tool Aid 87650 Door Trim and Panel Removal Tool
66 people say
Your Price: $9.99
Add to Cart
Skewdriver Pro SPK4042 Ratcheting straight and offset screwdriver set with 40 bits (Skewdriver Pro with ratchet handle, pictured)
8 people say
Your Price: $49.99
Add to Cart
Bojo Trim Panel Tools Set of 6 pry tools — helps remove interior and exterior trim and door panels
2 people say
Your Price: $29.99
Add to Cart
DEI Heat Shrink Tubing Black 4-foot length (Assortment)
6 people say
Your Price: $24.99
Add to Cart
InstallCard: Amp or Equalizer Prepaid professional amplifier or EQ installation
17 people say
Your Price: $79.99
Add to Cart
Your Price: $69.95

After $10.00 Price Break

Add to Cart
Autosound 2000 Disc One Low Frequency Test CD (Disc One)
1 person says
Your Price: $19.99
Add to Cart
Autosound 2000 Disc Four Amplifier Optimizer Test CD
8 people say
Your Price: $9.99
Add to Cart

Why choose SquareTrade?

The #1-Rated Protection Plan

Thousands of people have reviewed SquareTrade Protection Plans — and made us #1.

5-Day Service Guarantee & Free Shipping

We'll repair or replace your item in five business days or less after we've received it, or your plan is free. And, as always, we pay for all shipping.

Protection from Normal, Everyday Use

Repairing your average mechanical or electrical failure can cost as much as buying a new device. With SquareTrade, you're covered — including parts and labor.

3 Year Protection Plan
3 Year Protection Plan
Your Price: $29.99
Add to Cart

For a more in-depth review and enhanced detailed information on the MTX TH350.1D, please visit the Crutchfield website product page (/ISEO-rccbcspd/p_236TH3501D/MTX-TH350-1D.html ).