About the MTX Thunder1
Power in the mix
Power in the mix
Do you like your bass heavy, but your current tweeters can't seem to deliver the high frequencies in that mix? Then take a look at MTX's Thunder1 tweeters. They'll handle up to 90 watts RMS, so you can play them long and hard. Complex sounds like cymbals crashing and upper-range vocals will be reproduced with impressive accuracy, transforming your vehicle's dull soundstage into a vibrant one.
Tweak your tweeters
The Thunder1's discreet design includes a built-in crossover, along with flush- or surface-mounting capability for easy installation in that perfect spot in your vehicle. Plus, you can adjust the tweeters to match up properly with all the other speakers in your installation. And MTX's impressive 5-year prorated warranty makes the Thunder1 tweeters a smart buy.
Installation note: You'll need a pair of our universal backstraps to install these tweeters in the factory locations.
Highlights:
- 1" silk soft dome tweeter with mylar capacitors
- flush- and surface- mounting hardware included
- swivel feature for optimal imaging
- power handling: 10-90 watts RMS (180 watts peak power)
- frequency response: 2500-20,000 Hz
- impedance: 4 ohms
- sensitivity: 90 dB
- flush-mount depth: 3/4"
- warranty: 2 years
- MFR # THUNDER1
What's in the box:
- 2 Tweeters (7" wire attached)
- 2 Crossovers
- 2 Surface mount housings (with tweeters installed)
- 2 Flush mount backing rings
- 2 Flush mount trim rings
- 2 Foam spacers
- 2 Flush mounting clips
- Two M4x35mm machine screws
- Four 3/4" Self-tapping screws
- Cardboard template
- Mounting diagram
- Warranty information
Customer reviews for MTX Thunder1
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the MTX Thunder1
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 1-way | |
Tweeter Design | 30mm Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Silk | |
Woofer Composition | --- | |
Woofer Surround | --- | |
Parts Warranty | 2 Years | |
Labor Warranty | 2 Years | |
Specifications | ||
Sensitivity (1W at 1 meter) | N/A | |
Sensitivity at 2.83 volts | 90 | |
Frequency Response | 2500 - 20k Hz | |
Minimum RMS Wattage | 10 | |
Maximum RMS Wattage | 90 | |
Peak Power Handling (Watts) | 180 | |
Top-mount Depth (Inches) | 0 3/4 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 2 | |
Mounting Height (Inches) | 0.318 | |
Frame Width | 2.235 | |
Frame Length | 2.235 |
Product Research
Features
Crossovers: The crossover's input and output wires are attached. The 12" output wire has quick slides attached so the tweeter is easily connected. The 60" input wires are terminated with tinned bare wire. The crossover point is 4 kHz and the slope is 18 dB/octave.
Crossover Dimensions:
- Width: 1-3/8"
- Length: 3-7/8"
- Height: 7/8"
Tweeter Mounting Options: The tweeters can be flush mounted or surface mounted using the included hardware. Once installed in either housing, the tweeter will pivot approximately 15° in any direction.
Tweeter Dimensions:
Frame Diameter | Cutout Diameter | Mounting Height | Mounting Depth | |
---|---|---|---|---|
Flush Mount | 2.235" | 1.967" | 0.318" | 0.706" |
Surface Mount | 2.2" | N/A | 1.035" | 0.64" (Screw Depth) |
The MTX Thunder1 replaces these items
MTX TXC.1
- 1" teteron domes
- frequency response: 3,500-25,000 Hz
- 10-75 watts RMS power range
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...
These tweeters work great. They provide great highs when you have many subwoofers.
Holmes from Jersey City