Skip Navigation

MTX THUNDER1000.1

Mono subwoofer amplifier — 1,000 watts RMS x 1 at 1 ohm

7 Reviews | 3 questions - 3 answers

Add to Cart

MTX THUNDER1000.1

Overview

Our take on the MTX THUNDER1000.1

You'll get some serious MTX bass mojo when you put the THUNDER1000.1D mono amp in your car. This compact amp will drive your subwoofer setup with up to 1,000 watts RMS. Hook this amp up to a nice set of subs, and you'll hear sounds you've never heard before, even in your favorite songs.

Upgrade your power for better sound

You'll get some serious MTX bass mojo when you put the THUNDER1000.1D mono amp in your car. This compact amp will drive your subwoofer setup with up to 1,000 watts RMS. Hook this amp up to a nice set of subs, and you'll hear sounds you've never heard before, even in your favorite songs.

Versatility

MTX knows that your system changes over time, and this amp will adapt to almost any subwoofer situation. It'll send 350 watts to a single 4-ohm sub now, but it's capable of delivering up to an awesome 1,000 watts to a 1-ohm load, so you don't have to buy a new amp to handle a multiple sub setup later on. It's amazing to think that so much power comes from an amp that'll almost fit on a piece of computer paper. This little bruiser will truly fit in places where amps don't usually go.

Advanced tone control

You can adjust the low-pass filter and subsonic filter to get the best possible sound from your sub and enclosure. In the unlikely event you want to bump up the bass a little, you also have access to a selectable bass boost.

MTX THUNDER1000.1 control panel

MTX THUNDER1000.1 control panel

Awesome amp I have it powering 2 Polk MM1540svc with ease, In a mega cab it slams had a RF PRIME 1,200 previous and MTX sounds 1000 times better, lower frequency response and overall Slams way harder, in my opinion MTX knows how to make amps.

Awesome, Kona,Hi

What's in the Box:

  • Mono subwoofer amplifier
  • 4mm Allen wrench
  • 2mm Allen wrench
  • Four 1/2" Self-tapping screws
  • Owner's manual (English/ Spanish/ Portuguese/ French)

Product Highlights:

  • mono subwoofer amplifier
  • 350 watts RMS x 1 at 4 ohms (600 watts RMS x 1 at 2 ohms)
  • 1,000 watts RMS x 1 at 1 ohm
  • variable low-pass filter (40-220 Hz, 12 dB/octave)
  • selectable bass boost (0, 6, 12 dB at 50 Hz)
  • variable subsonic filter (10-50 Hz, 12 dB/octave)
  • frequency response: 20-220 Hz
  • preamp inputs
  • 4-gauge power and ground leads and a 100-amp fuse recommended — wiring and hardware not included with amplifier
  • no onboard fuses — when installing multiple amps in a system, an additional 100-amp in-line fuse between the distribution block and the amplifier is recommended
  • 12-5/8"W x 2-1/4"H x 6-5/16"D
  • warranty: 2 years
  • Our 60-day money-back guarantee
Reviews

MTX THUNDER1000.1 Reviews

Average Customer Review:

7 Reviews

2008 Dodge mega cab.

Written by: Awesome from Kona,Hi on April 1, 2016

Awesome amp I have it powering 2 Polk MM1540svc with ease, In a mega cab it slams had a RF PRIME 1,200 previous and MTX sounds 1000 times better, lower frequency response and overall Slams way harder, in my opinion MTX knows how to make amps.

Pros: Runs cool, Very good low end response

Cons: None

MTX 1000.1

Written by: Joe from Berry,Ky on May 18, 2015

Crutchfield Customer Review (What's this?)

  • "Coolness Factor"
  • Build Quality
  • Ease of Use
  • Sound Quality
  • Value

It is pounding two pioneer 12" PRO Series rated @600RMS with 1-ohm without getting hot, it is bad. Really like MTX amps, They do the job without any questions. this amp is good investment you should not be disappointed with its performance.

Pros: Small footprint, Big power, One of the best.

Cons: None

shocker of an amp

Written by: leroy from indianola ms on December 1, 2014

i ve had this amp two yrs with no problems what so ever....if you get this amp you better upgrade your subs...im bumping comp d 15s.....it makes the front end of my car shake and i have major window flex in my car....i paid 150 for the old model back in 2012 and it still look brand new

Pros: this is a sleeper amp ....i rather pay the price for this amp than buy and off brand amp

Cons: none

MTX

Written by: Jammin from Connellys Springs NC on September 5, 2013

Crutchfield Customer Review (What's this?)

Great price and value on a great little amp and very big sound...

Pros: Size ,Value

Cons: None

Best Bang for your buck for sure

Written by: Anonymous from New York NY on July 27, 2013

Crutchfield Customer Review (What's this?)

This Amp Really kicks Ass I am powering 2 12' 2ohms 'MTX Road Thunder Ported & the Gain level is not even @ 25% and my 2003 Honda Odyssey wants to fall apart "CLEAN CHEST POUNDING BASS"......NOTE: WHEN SETTING THIS Amp you must set the Voltage to work properly with your speakers great value for the $$$

Pros:

Cons:

Best amp I have ever owned in 15 years!!

Written by: Charles Dutcher from Huron SD on June 8, 2013

Crutchfield Customer Review (What's this?)

The look the feel and the power Is just amazing for the small physical size of this very powerful amp!!

Pros: great price!! small in size with huge output, stays cool under heavy use operating at 1 ohm. 5 year warranty!!! Sound is definately a much more higher quality bass and no clipping at its output level unlike my old amp that in order to get loud it had to clip a little.

Cons: no on board fuses luckily i had an extra 100A fuse and fuse holder.

THUNDER!!

Written by: BIGjerm from Eros, LA on June 3, 2013

Crutchfield Customer Review (What's this?)

After receiving this amp I at first thought, where's the rest of it!? I installed it hoping for the best but expecting the worst. After literally smoking my old subs the first 5 minutes in. I replaced them with a fresh pair of Alpine SWS-12D4's stepped down to 1-ohm mono in an off the shelf ported box. I was thoroughly impressed. This thing is a killer! Don't use under-rated subs unless you feel like replacing them...frequently. I just wish had came withe remote bass control witch is an optional add-on.

Pros: Small foot print Massive power output Open lug terminals vs spade terminal w/screws Great Value Remote Bass Control Option

Cons: No inboard fuse, must add extra in-line Remote bass control is extra purchase

Details

Hands-on research

What's in the box?

Download the MTX THUNDER1000.1 manual

  • Mono subwoofer amplifier
  • 4mm Allen wrench
  • 2mm Allen wrench
  • Four 1/2" Self-tapping screws
  • Owner's manual (English/ Spanish/ Portuguese/ French)

Product Research

Features
Connections

Features

Overview: The MTX Thunder1000.1 is a mono Class D subwoofer amplifier. It has aluminum heatsinks to dissipate heat generated by the amplifier. The amp produces 350 watts RMS x 1 at 4Ω, 600 watts RMS x 1 at 2Ω, and 1000 watts RMS x 1 at 1Ω.

Gain: The amp's rotary gain control is continuously variable from 200mV to 5V to match the output of the source unit.

Protection Circuits: The Thunder1000.1 provides protection against overheating, under voltage, and electrical short circuits.

Crossovers: The amp features a built-in low-pass crossover, with a continuously variable cutoff frequency of 40-220Hz; the crossover cannot be bypassed. Additionally, the amp has a subsonic filter to remove ultra-low frequencies, thus minimizing wasted power and protecting speakers not capable of reproducing those frequencies. It has a variable crossover frequency of 20-50Hz.

Bass Boost: The Thunder1000.1's bass boost circuit is centered at 50 Hz. It can be set to 0dB, +6dB, or +12dB.

Electronic Bass Control (EBC): An Electronic Bass Control (EBC) module is available directly from MTX that allows you to adjust the bass output of the amplifier from the front of the vehicle.

Connections

Power Terminals: The Thunder1000.1 features set screw terminals for power, ground and remote turn-on. The power and ground terminals will accommodate up to 4 AWG wire, while the remote turn-on terminal will accept up to 10 AWG wire. The set screws are loosened/tightened with the supplied Allen wrenches. MTX recommends the use of 4 AWG power and ground wires.

Note: The Amplifier is not equipped with an internal fuse. An external 100-amp fuse (not included) must be installed on the power wire. If the system has only this amp and a wiring kit is used that includes a fuse with a value other than 100-amps, the original should be replaced with a 100-amp fuse.

Speaker Connections: The amplifier is equipped with two pair of set screw terminal speaker outputs. The outputs are internally wired in parallel, making it easy to connect two subwoofers. Each terminal will accommodate up to 10 AWG bare wire and is loosened/tightened with the supplied Allen wrench.

EBC Port: The amp has a 3.5mm mini-jack for plugging in an optional Electronic Bass Control (EBC) module, currently available directly from MTX.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

3 questions already asked

Thanks for your question. For information on selecting the best amp I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system. [ Krissy  Jun 15, 2014 ]  Staff
If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can walk you through the settings on the product and see if there may be a fix. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer. You can also post your question in our forums: http://community.crutchfield.com. Or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/. [ Krissy  May 26, 2014 ]  Staff
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system. [ Krissy  Mar 12, 2014 ]  Staff
Library