Mono subwoofer amplifier 1,000 watts RMS x 1 at 1 ohm
Item #: 236THND10K
Your price: $379.99 Earn up to 380 Rewards points
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
Item #: 236THND10K
Your price: $379.99 Earn up to 380 Rewards points
You'll get some serious MTX bass mojo when you put the THUNDER1000.1D mono amp in your car. This compact amp will drive your subwoofer setup with up to 1,000 watts RMS. Hook this amp up to a nice set of subs, and you'll hear sounds you've never heard before, even in your favorite songs.
MTX knows that your system changes over time, and this amp will adapt to almost any subwoofer situation. It'll send 350 watts to a single 4-ohm sub now, but it's capable of delivering up to an awesome 1,000 watts to a 1-ohm load, so you don't have to buy a new amp to handle a multiple sub setup later on. It's amazing to think that so much power comes from an amp that'll almost fit on a piece of computer paper. This little bruiser will truly fit in places where amps don't usually go.
You can adjust the low-pass filter and subsonic filter to get the best possible sound from your sub and enclosure. In the unlikely event you want to bump up the bass a little, you also have access to a selectable bass boost.
MTX THUNDER1000.1 control panel
You might think you don't need an amp because you have a 400-watt system in your car, or because your new stereo puts out 50 watts a channel. But those are peak wattage ratings, which may boil down to 15 or 20 watts per channel, using the more realistic RMS rating. An amp sends your speakers the power they need to deliver your music with clarity and impact, whether you're using factory speakers or high-performance components. And low-frequency reproduction requires lots of power, so an amp is an absolute must if you're adding a sub to your system.
It is pounding two pioneer 12" PRO Series rated @600RMS with 1-ohm without getting hot, it is bad. Really like MTX amps, They do the job without any questions. this amp is good investment you should not be disappointed with its performance.
Pros: Small footprint, Big power, One of the best.
i ve had this amp two yrs with no problems what so ever....if you get this amp you better upgrade your subs...im bumping comp d 15s.....it makes the front end of my car shake and i have major window flex in my car....i paid 150 for the old model back in 2012 and it still look brand new
Pros: this is a sleeper amp ....i rather pay the price for this amp than buy and off brand amp
Great price and value on a great little amp and very big sound...
Pros: Size ,Value
This Amp Really kicks Ass I am powering 2 12' 2ohms 'MTX Road Thunder Ported & the Gain level is not even @ 25% and my 2003 Honda Odyssey wants to fall apart "CLEAN CHEST POUNDING BASS"......NOTE: WHEN SETTING THIS Amp you must set the Voltage to work properly with your speakers great value for the $$$
The look the feel and the power Is just amazing for the small physical size of this very powerful amp!!
Pros: great price!! small in size with huge output, stays cool under heavy use operating at 1 ohm. 5 year warranty!!! Sound is definately a much more higher quality bass and no clipping at its output level unlike my old amp that in order to get loud it had to clip a little.
Cons: no on board fuses luckily i had an extra 100A fuse and fuse holder.
After receiving this amp I at first thought, where's the rest of it!? I installed it hoping for the best but expecting the worst. After literally smoking my old subs the first 5 minutes in. I replaced them with a fresh pair of Alpine SWS-12D4's stepped down to 1-ohm mono in an off the shelf ported box. I was thoroughly impressed. This thing is a killer! Don't use under-rated subs unless you feel like replacing them...frequently. I just wish had came withe remote bass control witch is an optional add-on.
Pros: Small foot print Massive power output Open lug terminals vs spade terminal w/screws Great Value Remote Bass Control Option
Cons: No inboard fuse, must add extra in-line Remote bass control is extra purchase
|RMS Power Output (Watts x Channels)||
350 x 1
|Peak Power Output (Watts x Channels)||2000 x 1|
|Power at 2 Ohms (Watts x Channels)||600 x 1|
|Bridged Power (Watts x Channels)||N/A|
|Minimum Impedance Bridged||N/A|
|Minimum Impedance Unbridged||1|
|Best Frequency Response||20-220 Hz|
|THD at Rated RMS Power||0.3%|
|Signal to Noise Ratio||75 dB|
|Low-Pass Crossover Frequency||40-220 Hz|
|Low-Pass Slope (dB/octave)||12 dB/octave|
|High-Pass Crossover Frequency||N/A|
|High-Pass Slope (dB/octave)||N/A|
|Bass Boost||0, 6, 12 dB|
|Bass Boost Frequency||50 Hz|
|Speaker Level Inputs||No|
|Parts Warranty||5 Years (3-5 Prorated)|
|Labor Warranty||5 Years (3-5 Prorated)|
Overview: The MTX Thunder1000.1 is a mono Class D subwoofer amplifier. It has aluminum heatsinks to dissipate heat generated by the amplifier. The amp produces 350 watts RMS x 1 at 4Ω, 600 watts RMS x 1 at 2Ω, and 1000 watts RMS x 1 at 1Ω.
Gain: The amp's rotary gain control is continuously variable from 200mV to 5V to match the output of the source unit.
Protection Circuits: The Thunder1000.1 provides protection against overheating, under voltage, and electrical short circuits.
Crossovers: The amp features a built-in low-pass crossover, with a continuously variable cutoff frequency of 40-220Hz; the crossover cannot be bypassed. Additionally, the amp has a subsonic filter to remove ultra-low frequencies, thus minimizing wasted power and protecting speakers not capable of reproducing those frequencies. It has a variable crossover frequency of 20-50Hz.
Bass Boost: The Thunder1000.1's bass boost circuit is centered at 50 Hz. It can be set to 0dB, +6dB, or +12dB.
Electronic Bass Control (EBC): An Electronic Bass Control (EBC) module is available directly from MTX that allows you to adjust the bass output of the amplifier from the front of the vehicle.
Power Terminals: The Thunder1000.1 features set screw terminals for power, ground and remote turn-on. The power and ground terminals will accommodate up to 4 AWG wire, while the remote turn-on terminal will accept up to 10 AWG wire. The set screws are loosened/tightened with the supplied Allen wrenches. MTX recommends the use of 4 AWG power and ground wires.
Note: The Amplifier is not equipped with an internal fuse. An external 100-amp fuse (not included) must be installed on the power wire. If the system has only this amp and a wiring kit is used that includes a fuse with a value other than 100-amps, the original should be replaced with a 100-amp fuse.
Speaker Connections: The amplifier is equipped with two pair of set screw terminal speaker outputs. The outputs are internally wired in parallel, making it easy to connect two subwoofers. Each terminal will accommodate up to 10 AWG bare wire and is loosened/tightened with the supplied Allen wrench.
EBC Port: The amp has a 3.5mm mini-jack for plugging in an optional Electronic Bass Control (EBC) module, currently available directly from MTX.
5 Year Warranty Terms: MTX products purchased on or after January 1st, 2013 carry a 5-Year Prorated Warranty with the following terms:
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Thanks for your question. For information on selecting the best amp I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system. [ Krissy Jun 15, 2014 ] Staff
If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can walk you through the settings on the product and see if there may be a fix. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer. You can also post your question in our forums: http://community.crutchfield.com. Or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/. [ Krissy May 26, 2014 ] Staff
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system. [ Krissy Mar 12, 2014 ] Staff