Skip Navigation

MTX Vehicle-specific Unloaded Enclosure — Dual 10"

For 1997-up Jeep Wrangler (Tan)

2 Reviews

Find what fits your vehicle

Can't find your exact vehicle?

Item #: 236TJ97TU

In Stock

Add to Cart

Ships Free From Manufacturer

Ask an expert

Our VA-based experts can help.

1.888.955.6000

ChatEmail

Add to Cart

349.99

Overview

Our take on the MTX Vehicle-specific Unloaded Enclosure — Dual 10"

MTX vehicle-specific unloaded enclosures preserve all the legroom in pickup trucks and all the cargo space in SUVs. Each enclosure is an acoustically-designed, non-resonant, airtight enclosure, with the correct internal volume to yield optimum bass response from a compatible subwoofer.

MTX vehicle-specific unloaded enclosures preserve all the legroom in pickup trucks and all the cargo space in SUVs. Each enclosure is an acoustically-designed, non-resonant, airtight enclosure, with the correct internal volume to yield optimum bass response from a compatible subwoofer.

So what makes these enclosures different than a standard sub box? MTX designs each enclosure for optimum performance in your specific vehicle's acoustic space. Using state-of-the-art rotational molding techniques, and exotic high-density polyethylene ,MTX creates a sculpted masterpiece of a sub box, beautifully finished to blend with your interior. And they sound as good as they look, delivering bass that's tight, accurate, hard-hitting, and way down low.

This enclosure comes without speakers — you can install a pair of 10" Type 1 subwoofers. For best results, MTX strongly recommends using a speaker designed for an enclosure with a volume of 1 cubic foot. The enclosure mounts behind the rear seat of the 1997-up Jeep Wrangler. Please enter your vehicle information or call an Advisor at 1-888-955-6000 to find out if this model is compatible with your vehicle.

This box fits perfect in my Jeep TJ, sound is amazing.

BigggD88Fan, Pasco Wa. 99301

What's in the Box:

  • Unloaded tan subwoofer enclosure
  • 2 Self-adhesive foam gaskets
  • 2 Metal mounting brackets
  • Two 2" self-tapping screws
  • Sixteen 3/4" self-tapping screws
  • 2 Flat washers
  • Instructions

Product Highlights:

  • custom-fit unloaded subwoofer enclosure
  • Type 1 enclosure for two 10" subwoofers
  • mounts behind the rear seat of the 1997-up Jeep Wrangler
  • high-density polyethylene construction
  • warranty: 2 years
  • Our 60-day money-back guarantee
Reviews

MTX Vehicle-specific Unloaded Enclosure — Dual 10"

Average Customer Review(s):

(2 Reviews)

Great Box

BigggD88Fan from Pasco Wa. 99301 on 10/7/2014

2001 Jeep Wrangler
Crutchfield Customer Review (What's this?)

This box fits perfect in my Jeep TJ, sound is amazing.

Pros: Fit sound

Cons:

works and sounds great

Sean from Dallas Texas on 10/21/2012

1998 Jeep Wrangler
Crutchfield Customer Review (What's this?)

With a jeep wrangler you are left with very little room to put any kind of subwoofer enclosure. Found this box while browsing crutchfield and took the plunge. Glad i did. I am running two JBL 10s with Boston mounted under seat and sounds great and great, but most importantly clean. Plus no obstruction with back seat and not really noticeable or visible to outside parties (i have soft top and do not have worries leaving top down and walking away for bit). Very good product and happy with purchase.

Pros:

Cons:

Details

Hands-on research

Product Research

Features
Installation

Features

Compatibility: This enclosure mounts behind the rear seat of your 1997-up Jeep Wrangler.

Unloaded: This enclosure comes without speakers, allowing you to install two compatible 10" subwoofers of your choice.

Molded Enclosure: The molded, high-density polyethylene resin enclosure resists flexing and dampens resonance.

Spring Posts: The enclosure has one set of spring posts that will accept bare wire, pin connectors, banana plugs and dual banana plugs.

Installation

Mounting Location: This enclosure mounts behind the rear seat of your 1997-up Jeep Wrangler. Once installed, the woofers fire downward.

Note: The provided dimensions are taken at the widest points of the enclosure. Keep in mind that the enclosure is custom made to fit in a particular vehicle, so the enclosure will fit properly in only one specific location.

Tools Required: You will need the following tools to install this enclosure:

  • Powered screwdriver
  • 6" bit holder extension
  • Right-angle Skewdriver
  • #2 Phillips head bit
  • Utility knife

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

Library