About the MTX TNP112D
Add some bass to your ride
Add some bass to your ride
You want to take your bass to the next level, but you don't want to mess with matching up subs, a box, and an amp. This MTX TNP112D bass package includes a powerful mono amplifier, along with a 12" sub in a ported box. Install this setup in your car to get the rumble your system's been missing.
A complete bass package, just add wiring
With the package, you get a Terminator TNA201 mono amplifier that'll provide up to 200 watts RMS, a great match for the tough 12" Terminator sub. The sub comes mounted in a rugged ported enclosure made from 5/8" MDF that'll stay safe in your trunk, giving you the low-frequency reinforcement you're looking for. And MTX protects this bass package with a 2-year warranty.
Product highlights:
- package includes one Terminator TNA201 mono amplifier and a single 12" ported enclosure loaded with one 12" Terminator subwoofer.
Terminator TNA201 mono amplifier:
- 100 watts RMS x 1 at 4 ohms (200 watts RMS x 1 at 2 ohms)
- variable high- and low-pass filters (50-250 Hz, 12 dB/octave)
- variable bass boost (0-18 dB boost at 40 Hz)
- preamp- and speaker-level inputs
- fuse rating: 20A x 1
- 8-gauge power and ground leads recommended wiring and hardware not included with amplifier
- 11-3/4"W x 2"H x 10-1/2"D
- warranty: 2 years
Terminator ported single 12" enclosure:
- 5/8" MDF construction with aviation-grade carpet
- one Terminator 12" 4-ohm subwoofer
- polypropylene woofer cone with durable rubber surround
- frequency response: 43-125 Hz
- power range: 100-200 watts RMS
- dimensions: 21-3/8"W x 17-1/4"H x 15-1/4"D
- warranty: 2 years
- MFR # TNP112D
What's in the box:
- Mono amplifier
- 20 amp ATO fuse (installed)
- Speaker level input harness
- Subwoofer enclosure loaded with one 12" woofer
Customer reviews for MTX TNP112D
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the MTX TNP112D
Product Research
Features
Overview: This package includes a mono subwoofer amplifier and an enclosure loaded with one 12" woofer.
Enclosure: The sealed enclosure is built from 5/8" MDF (Medium Density Fiberboard) and is covered in aviation grade carpet. The installed 12" subwoofer is 4Ω.
Amplifier: The mono amplifier output is 200 watts RMS at 4Ω. It has a pair of RCA inputs, as well as a speaker-level input harness. There is also a pair of RCA outputs, so you can connect another amplifier without having to run a second pair of RCA cables back to your headunit. The low-pass crossover is adjustable from 50-250 Hz. The power, ground, and speaker output wire is attached to set-screw terminals. (8-gauge power wire is recommended.)
Note: For this system the amplifier's crossover should be set to low-pass.
Loading...
Loading accessories...
Customer Q&A
5 questions already asked
Loading...
Loading articles...
Bought and installed this product for a customer. Very pleased with the sound and volume. Even more pleased with the price. Best budget combo out there.
Tom from Long Island, New York