About the MTX TNS65
Step up your sound
Step up your sound
If you're looking for a big upgrade in sound without a huge outlay of cash, take a look at the MTX Terminator line of car speakers. You'll be amazed at how much better your music sounds once you've replaced your burned-out factory speakers with a set of these quality MTX Terminators. And they're protected by MTX's unique 5-year warranty.
Impressive performance and value
MTX's TNS65 6-1/2" component speaker system will take your in-car audio experience to the next level, whether powered by a factory radio, an aftermarket car stereo, or a small amp. The system handles up to 45 watts RMS, and includes two durable polypropylene woofers and two separate 1" Mylar tweeter. Mount the tweeters up closer to your ears instead of down by your feet, and it'll sound like the band is playing on your dashboard.
Product highlights:
- 6-1/2" component car speakers (pair)
- polypropylene woofer cone
- separate 1" Mylar tweeters
- frequency response: 54-20,000 Hz
- sensitivity: 89 dB
- RMS power: 5-45 watts (90 watts peak)
- top-mount depth: 2.0"
- grilles included
- warranty: 5 years (free repair or replacement for 2 years; prorated replacement for years 3 through 5)
- MFR # TNS65
What's in the box:
- Two woofers
- 2 Tweeters (3-1/2" wire attached)
- 2 Woofer grilles
- Two 6" Lengths of speaker wire (each has quick-slides on one end and bare wire on the other)
- 2 Surface mount tweeter housings
- 2 Angled semi-surface mount tweeter housings
- 2 Flush mount tweeter housings
- 2 Flush mounting clips
- Four 5/8" Self-tapping screws
- Eight 1" self-tapping screws
- Two 1-3/8" Self-tapping screws
- 8 Speed clips
- Installation instructions
- Warranty information
- Specifications printed on box
Customer reviews for MTX TNS65
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the MTX TNS65
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | 1" Semi-Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Mylar | |
Woofer Composition | Polypropylene | |
Woofer Surround | Rubber | |
Parts Warranty | 5 Years (3-5 Prorated) | |
Labor Warranty | 5 Years (3-5 Prorated) | |
Specifications | ||
Sensitivity (1W at 1 meter) | 84.7 | |
Sensitivity at 2.83 volts | 89 | |
Frequency Response | 54 - 20k Hz | |
Minimum RMS Wattage | 5 | |
Maximum RMS Wattage | 45 | |
Peak Power Handling (Watts) | 90 | |
Top-mount Depth (Inches) | 2 | |
Bottom-mount Depth (Inches) | 2 5/16 | |
Cutout Diameter or Length (inches) | 5 | |
Mounting Height (Inches) | 0.516 | |
Frame Width | 6.226 | |
Frame Length | 6.226 |
Product Research
Features
Tweeter Mounting Options: The tweeters can be flush mounted, surface mounted, or angle mounted. The angled mount is a semi-surface mount, because most of the housing sits above the mounting surface, but a small portion is counter sunk into the panel. The tweeter can pivot in the flush and surface mount housings.
Tweeter Dimensions:
Frame Width | Frame Length | Cutout Diameter | Mounting Height | Mounting Depth | |
---|---|---|---|---|---|
Flush Mount | 1.842" | 1.842" | 1.643" | 0.113" | 0.91" |
Surface Mount | 1.892" | 1.892" | N/A | 0.87" | 0.54" (Screw Depth) |
Angled Mount | 1.783" | 2.11" | 1.4" x 1" | 1" | 0.764" (Screw Depth) |
Crossovers: The tweeter crossover is built into the tweeter casing. The woofer uses its natural mechanical frequency roll off.
Woofer Mounting: The woofers fit into standard 6-3/4 and 6-1/2 openings, but the bolt pattern is the symmetrical 4-hole 6-3/4. When mounted in a typical 6-1/2 location, new screw holes must be drilled.
Warranty: Although the speaker reviewed and measured (taken from our first shipment) included information indicating a 1 year warranty, MTX recently changed to a 5-Year Prorated Warranty with the following terms:
- Years 1-2: Products found to be defective in materials or workmanship during the first two years will be, at Mitek's option, repaired or replaced by Mitek at no charge. The warranty period does not renew, but continues on from the original date of purchase.
- Years 3-5: The purchase price of an item which becomes defective after the first two years and prior to the end of the warranty period will be prorated and credited toward the purchase of a new MTX product. The amount of proration is determined by dividing the original purchase price by the number of months in the warranty period (60), then multiplying the result by the number of months remaining in the warranty period.
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...
Great value for the dollar. I bought these to replace my oe tweets and some 6 year old door speakers. Upon installation I became pleasantly surprised with the sound from these speakers! They are not great for bass, but for my setup I didn't care. They work great with my Pioneer head unit.
Nate from AZ