About the MTX Amplified ThunderForms
Crinkled french fries, discarded receipts, old gum wrappers — you probably have everything in the hidden corners of your vehicle except great bass. But with custom ThunderForm enclosures, you can fill the nooks and crannies of your car, truck, or SUV with low tones that stand out.
MTX engineers evaluate the "sonic signatures" of top-selling vehicles so they can design ThunderForms as custom acoustic matches. With "rotational molding," MTX ensures that each ThunderForm fits and blends inconspicuously into your vehicle. They're made of high-density polyethylene resin to curb resonances and deliver bass that's tight, hard-hitting, and way down low. The enclosure is seamless and airtight, with the correct internal volume to yield optimum bass response from the subwoofers.
This molded MTX ThunderForm comes loaded with one premium-quality 10" Terminator subwoofer modified especially for amplified Thunderforms, and powered by a specially-designed 200-watt mono amp. It mounts behind the driver's seat of a standard cab 1996-04 Toyota Tacoma truck (with bench or bucket seats). There is no loss of leg room, but the factory jack arm must be relocated. Hardware is included.
Installation Note: When this ThunderForm is installed in a truck with bucket seats, the carpeted rear cover must be removed from the vehicle. This installation requires drilling an 11/64" hole in the cab wall.
Product highlights:
- high-density polyethylene enclosure
- one Terminator 10" subwoofer
- built-in 200-watt RMS amplifier
- variable low-pass filter (50-150 Hz at 12 dB per octave)
- frequency response 20-165 Hz
- warranty: 2 years
- MFR # TTP10AT-TN
What's in the box:
MTX Amplified ThunderForms owner's manual
- Amplified ThunderForm enclosure loaded with one 10" Terminator subwoofer
- Two 20 amp fuses (1 in-line/1 installed in the ThunderForm)
- Wiring harness (20' power lead/3' ground lead and 3' remote turn-on lead)
- Speaker-level to RCA harness
- Electronic Bass Control (wired remote) with attached cable
- Mounting hardware
- Installation instructions
Customer reviews for MTX Amplified ThunderForms
Loading...
Loading reviews...
Average review:
1.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the MTX Amplified ThunderForms
Product Research
Features
Vehicle-Specific Custom Enclosure: This MTX ThunderForm enclosure is specifically designed to fit select 1996-2004 standard cab Toyota Tacoma pickups. Please refer to the Crutchfield Car Selector to confirm fit for your vehicle.
Enclosure: The ThunderForm enclosure is made of molded high-density polyethylene resin, which dampens resonance and is rigid enough to resist flexing. It is an acoustic suspension (sealed) chamber.
Mounting Location: This enclosure is mounted behind the driver's seat. Retaining clips are provided to relocate the jack handle. Note: The provided dimensions are taken at the widest points of the enclosure. Keep in mind that these enclosures are custom made to fit in this particular vehicle, so the enclosure will fit properly in only one specific location.
10" Terminator Subwoofer: This enclosure comes loaded with one 10" MTX Terminator subwoofer. The woofer has an unusual impedance, specifically designed for the built-in amp, and cannot be replaced with standard MTX models.
Class D Amplifier: The enclosure contains a built-in 200-watt Class D (digital) amplifier that allows RCA or speaker-level input. The amplifier is highly efficient and designed specifically for use with the subwoofers in the enclosure.
Electronic Bass Control (EBC): The EBC is a wired remote and allows you to adjust the bass level from anywhere in the vehicle. Installing the EBC is optional.
Low-pass Crossover: The low-pass crossover point is adjustable from 50 to 150 Hz for a seamless transition between the output of this unit and that of the other speakers in the vehicle.
Controls:
- Gain Control: rotary control; set the gain of the amplifier is match the input
- Crossover Control: rotary control; adjust the crossover from 50 to 150 Hz
Auto Turn-On Feature: When speaker level inputs are used, the system will automatically turn on and off with the radio.
Tools Required: The manual provides this list of required tools:
- Powered Screwdriver
- #2 Phillips Head Bit
- 8mm Wrench
- 7/16" Wrench
- 11/64" Drill Bit
- Wire Cutters
- Terminal Crimpers
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...