Chat
Contact us
Close contact box
Connect ID #
757 493 387 4
Connect ID #
757 493 387 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

MTX WET75.4 4-channel marine amplifier — 75 watts RMS x 4 at 4 ohms

Item # 236WET754

California customers:
Please click here for your Proposition 65 warning.

1 question - 1 answer

Item # 236WET754

Low stock
$269.95 -$18.90 Outlet savings
$251.05

Other options

About the MTX WET75.4

Bob Bihlmayer

MTX gets WET

MTX brings their years of land-based experience to the water with their WET Series marine components. Based on their Thunder Series amps, the WET75.4 4-channel amplifier is designed to power your speakers under seriously adverse conditions. Its weather-resistant features include a conformal coated circuit board, stainless steel hardware, rubber gaskets around the RCA connectors, and plastic control covers to keep moisture from getting to the amplifier. The 75.4 also features MTX's surface mount technology, which attaches critical components directly to the circuit board to minimize the effect of vibration.

MTX WET75.4 100W x 4 Marine Amplifier

MTX built this rugged amp to stand up to moisture, salt, and sun.

Power and control

Behind the weatherproofing and the construction, you'll find a Class A/B 4-channel amplifier capable of delivering 75 watts per channel at 4 ohms, or 100 watts at 2 ohms. Variable high-pass filters on the front and rear outputs, along with a variable low-pass filter on the rear outputs, allow you to fine-tune the sound environment. And MTX made this amp to fit the tight spaces in a boat, with a small footprint that allows it to go almost anywhere and an extruded heat sink that'll keep things cool. It's ready to make waves. Are you?

Product highlights:

  • 4-channel marine amplifier
  • Class A/B design
  • 75 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms)
  • variable high-pass filters on front and rear outputs
  • variable low-pass filter on rear outputs
  • conformal-coated circuit board
  • weather-resistant construction
  • dimensions: 12-1/8"W x 6-3/8"D x 2-1/4"H
  • warranty: 2 years
  • MFR # WET75.4

What's in the box:

  • 4-Channel amplifier
  • 4mm Allen wrench
  • 2mm Allen wrench
  • Four 5/8" Stainless steel self-tapping screws
  • Owner's manual (English/ Spanish/ Portuguese/ French)

See the difference between "Open Box" and "Scratch & Dent" Outlet items

Customer reviews for MTX WET75.4

Loading reviews...

Average review:

4.5 out of 5 stars
11 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

Product Research

Features
Connections

Features

Overview: The MTX WET75.4 is a full range 4-channel amplifier designed for the harsh marine environment. The amp features a conformal coated PCB, covered controls, rubber gaskets around the RCA inputs, and stainless steel mounting hardware. The output power is 75 watts RMS x 4 at 4Ω, 100 watts RMS x 4 at 2Ω, and 200 watts RMS x 2 bridged at 4Ω.

Note: The cover over the gain and crossover controls is held in place by two 2.5mm Allen head screws; no 2.5mm Allen wrench is included with the amp.

Gain: The amp's front and rear channel rotary gain controls are independent and continuously variable from 200mV to 5V to match the output of the source unit.

Protection Circuits: The WET75.4 provides protection against overheating, under/over voltage, and electrical short circuits.

Crossovers: The front and rear channels have independent built-in crossovers:

  • Front: high-pass; continuously variable from 10 Hz (full range) to 200 Hz
  • Rear: switchable between low-pass, full range, and high-pass; the crossover point (high-pass or low-pass) is continuously variable from 50 Hz to 750 Hz
Connections

Power Terminals: The WET75.4 features set screw terminals for power, ground and remote turn-on. The power and ground terminals will accommodate up to 4 AWG wire, while the remote turn-on terminal will accept up to 10 AWG wire. The set screws are loosened/tightened with the supplied Allen wrenches. MTX recommends the use of 4 AWG power and ground wires.

Note: The Amplifier is not equipped with an internal fuse. An external 60-amp fuse (not included) must be installed on the power wire. If the system has only this amp and a wiring kit is used that includes a fuse with a value other than 60-amps, the original should be replaced with a 60-amp fuse.

Speaker Connections: The amplifier is equipped with four pair of set screw terminal speaker outputs. Each terminal will accommodate up to 10 AWG bare wire and is loosened/tightened with the supplied Allen wrench.

Loading accessories...

Customer Q&A

1 question already asked

Q
Will this power led lighted speakers?
pat  Jun 08, 2019
1 answer
A
Hi Pat! If you're going to be using LED speakers on your install, you'll actually just need to purchase speaker wire that has RGB wires within the same wiring jacket. You'll still wire the positive and negative wiring to the amp as usual, you'll basically be stringing your speakers together with the addition RGB wires, this gives them the power they need for lighting, as well as keeps all of your speakers lighting connected, so you get a nice uniform install. I recommend using WetSounds RGB speaker wire, https://www.crutchfield.com/p_867XSPKRGB/Wet-Sounds-WWX-SPK-RGB-Combo.html And to make the LED connections super easy, WetSounds also makes a wiring splitter designed for LED marine lighting! https://www.crutchfield.com/p_8674P1M3F/Wet-Sounds-RGB-4P-1M-3F.html Let us know if we can help, Pat!
jessica  Jun 16, 2019 (Staff)

Loading articles...

Compare the sound