Name: Crux RVCCH-75DC Backup Camera System
Brand: CRUX
SKU: 249RCH75DC
Price: 299.99 USD
Availability: InStock
Rating: 4 (55 reviews)

Other options

Add to wishlist

by Crutchfield's Alexander H.

The backup cam just for you

Designed specifically for select 2013-up Ram vehicles, this Crux RVCCH-75DC rear-view camera system allows you to integrate backup video into your factory radio. The package includes the CH-75D rear-view camera, an interface and harness that connect to the factory radio, and a power/signal cable that you'll route from the camera to the front of your car.

KEEP READING

The backup cam just for you

Once installed, you'll see a generous, well-lit picture of what's behind you, with a 170-degree wide view and video capture down to 0.2 Lux for night driving. Crux also gives you the option to enable on-screen parking assist lines so you can gauge distance more easily.

NOTE: The Crux RVCCH-75DC backup camera system is compatible with the Uconnect radio with 8.4” screen, the Uconnect radio with 5” screen and 6-button/2 knob interface, and the Uconnect radio with 4.3” screen and 6-button/2 knob interface. This system is NOT compatible with diesel models or those with factory-installed cargo cameras.

Installing this camera yourself? Here's what you should know.

What does it do? Unless otherwise noted, a backup camera is only intended for use backing up your vehicle. (If you require a front-view or constant rear-view camera, check for that capability.)

What tools and supplies will I need? A panel tool, a wire cutter/stripper, a soldering iron, and a rosin-core solder with heat shrink tubing are recommended, along with whatever tools are needed to remove the radio from the dash.

How much wiring is required? Wiring instructions vary from camera to camera. Some cameras have power wiring that can only be connected near the radio. Others let you power the camera at compatible reverse lights. In all cases, the camera must be wired for power and ground, the camera's video output must be connected to the radio/monitor, and the radio/monitor must be connected to a reverse trigger in your vehicle. Some radio replacement interfaces supply a reverse trigger wire for the radio -- using that wire to power your camera will damage the interface.

Will the included video cable be long enough? You'll need to route the camera's video cable from its mounting location outside your vehicle into your vehicle's cabin and all the way to the screen in the dash. This often requires drilling a small hole in your vehicle or filing some metal and or plastic. You'll also need to estimate the length of cable needed to run from the camera to the dash, which will not be a straight shot. Each camera's cable length is listed.

READ LESS

Highlights:

system includes waterproof CCD camera, video extension cable, factory interface and factory harness
NTSC wide-angle rear view camera compatible with select Ram vehicles
resolution: 420 TV lines
pixels: 656 x 492
170° wide viewing angle
warranty: 1 year
MFR # RVCCH-75DC

What's in the box:

Crux RVCCH-75DC Backup Camera System owner's manual

Rear-view integration module
Handle assembly w/ Rear-view camera (attached 4' cable)
27' Power/Composite video cable
Vehicle/interface harness
18.5mm Hole-saw bit
Installation Instructions

Loading reviews...

Average review:

55 reviews

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Filter by rating

filterStar

Customer photos

Customer provided image, click to load a larger version.

Verified customer

Verified employee review

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Have questions for

Crutchfield response

Was this helpful?

<< >>

Researched by Crutchfield's Russ B.

Product Research

Features

Sightline Series Rear-View Camera System: The Sightline series RVCCH-75DC rear-view camera system by Crux has been specifically designed for select Dodge Ram trucks that are equipped with a U-Connect factory radio. Now you can use your vehicle's factory radio to see what's behind you when backing up. The RVCCH-75DC comes with an interface module and the necessary harnesses and cables to connect the rear-view camera to your vehicle's factory system.

Note: The RVCCH-75DC rear-view camera system is meant as a back-up aid only; never solely rely on the rear-view camera when backing-up. In addition to using the rear-view camera, always look behind you to make sure everything is clear when backing up your vehicle.

Vehicle Compatibility: The Sightline series RVCCH-75DC rear-view camera system is compatible with the following Dodge Ram trucks that feature a U-Connect factory radio with 8.4" screen with separate knobs, 5" screen with 6-buttons and separate knobs, or 4.3" screen with 6-buttons and separate knobs.

Make	Model	Year
Dodge	Ram 1500/2500/3500	2013-2017

Notes:

Not compatible with diesel powered vehicles.
This camera will not work in RAM trucks equipped with the factory installed cargo camera.
Factory radio must be a "MYGIG" radio.

Automatic Rear-View Switching: The RVCCH-75DC features automatic rear-view switching. This means that when you place your vehicle in reverse gear, your factory radio's monitor will automatically switch over to the rear-view camera so you can see what's behind you immediately.

Park Assist Lines: The rear-view camera provides parking assist lines on the screen of your vehicle's in-dash factory radio. These parking lines are there to assist you when backing up into a parking space. There are two vertical lines which help you judge the left and right edges of the parking space and your vehicle. There are also 3 color-coded horizontal lines that are used to distinguish how close you are getting to the end of the parking spot - Yellow (Clear), Purple (Getting Close), Red (Very Close).

Note: You can turn off the parking assist lines by cutting white wire loop of the back-up camera cable.

Replacement Handle Assembly: The RVCCH-75DC's rear-view camera flush mounts in the included bracket/handle assembly. This custom-designed mounting bracket and handle assembly replaces the factory handle of your truck's tailgate. First you will need to remove the factory handle from the tailgate and then install the bracket/handle assembly in place of it. You'll also need to drill a 18.5mm (5/8") hole behind the rear-view camera in order to route the wires and cables.

Power/Ground & Signal Connections: The rear-view camera features an attached 19" power/signal cable which plugs into the included 20' composite video cable and the 46" power/ground cable. The composite video cable then plugs into the include vehicle harness. The vehicle harness plugs into the RVCCH-75DC's interface module and your vehicle's factory radio.

Installation Note: Because of the cables attached to the tailgate, you will need to disconnect and reconnect the camera each time you remove/re-attach the tailgate.

Specifications:

Resolution: 420 TV Lines
Pixels: 656 x 492
Viewing Angle: 170-degrees
Minimum Illumination: 0.2 Lux
Shutter Speed: 1/60s-20us
Voltage: 12V

Loading accessories...

12 questions already asked

does it come with something to enable the camera on factory radio?

jeff Aug 15, 2022

1 answer

It does come with a module that helps enable the ability within the stock radio.

jason Aug 16, 2022 (Staff)

Do you have to splice into the wiring harness at any point?

mikebravo1973# Mar 03, 2020

1 answer

Hi Jason, thank you for your question. For the installation of the Crux RVCCH-75DC backup camera system, you will not need to splice into your factory wiring. If you would like to discuss this further with an Advisor, feel free to reach out to us via online chat, or by phone at 1-800-324-9695.

jessica Mar 17, 2020 (Staff)

Is the power supply to camera constant or switched?

jeff Aug 30, 2019

3 answers

Mine comes on when I turn on my ignition switch

bobby Sep 09, 2019

thomas Sep 09, 2019

switched

mary Sep 09, 2019

Will it work with an aftermarket radio?

norman Apr 09, 2019

3 answers

Yes... I just replaced my radio after installing this with the factory radio... however you don't need the factory harness interface that comes with this kit. So it might be better to find something else cheaper.

justin Apr 11, 2019

Yes works like a charm

juan Apr 09, 2019

Not sure. If the aftermarket radio uses factory style connections and display it probably would work. There's no way to know short of testing it.

tim Apr 09, 2019

can i replace the tail gate camers with a diffrent camers. I have cap with intergrated doors so the tail gate is not available?

mark Dec 24, 2018

1 answer

Hey Mark. I'm not sure I fully understand your question. Are you interested in using the Crux RVCCH-75DC Backup Camera System but swapping out the camera that comes included? Or are you wanting a different camera that also works with the stock screen but mounts in a different location? If you can provide some more details about the vehicle and what kind of setup you are hoping for we can let you know what options we have. You can chat or call a Product Advisor for personalized advice here: https://bit.ly/2QNxGQB --Cosmo

casey Jan 01, 2019 (Staff)

Will this also work with aftermarket radio?

arthur Jul 18, 2018

1 answer

Not sure. I have an aftermarket sound system that it didn't affect at all, but my head unit is all stock. If the wiring harness behind the radio wasn't changed, then i would think it should work

ryan Jul 18, 2018

Do the guidelines move like the factory ones?

william Jun 26, 2018

6 answers

No, they were stationary on my system.

chad Jun 28, 2018

The guidelines don't move. They stay straight. I love this kit though. It works great.

matthew Jun 27, 2018

No they don't move or bend they are straight. I find it easier when hooking up to my horse trailer. The last line is exactly where my hitch ball is so I know how far to back up. Hope this helps.

melissa Jun 26, 2018

No. They are fixed.

richard Jun 26, 2018

The guidelines do not move

bobby Jun 26, 2018

No. The guidelines are steady.

james Jun 26, 2018

I looked at the interface specs on the crux website and saw this note "Note will not work with heated seats or heated steering wheel controls" --- I have a 2013 Ram 2500 Bighorn that has both heated seats and steering wheel... Is this accurate -- will the camera not work if I have these options or is this old information? I asked crux but no response so far....

lee May 10, 2018

1 answer

It's should work because it's a t adapter harness to the back of the radio so I think it would

christian May 12, 2018

Does the camera require programing form a dealer to make it work?

lloyd Apr 16, 2018

5 answers

No it does not as long as you have a RA2 radio or newer

christian May 12, 2018

You do not need a dealer to Intall it. But we did call the help line for troubleshooting issues. Once we understood what had to be done it was fine works great.

melissa May 04, 2018

It does not require any programming changes to the vehicle. I installed mine, followed the directions and it has worked flawlessly for years. Bought it to assist in trailer hook ups but find I use it often in parking lots and tight quarters when backing up.

david s May 04, 2018

Not at all. There is a module that plus into the back of the radio/stereo that has dip switches to select a couple of possible options. Other than that it is totally plug and play.

james May 04, 2018

No nothing need from the dealer on my Dodge Ram

bobby May 04, 2018

Does this tailgate handle in any way interfere with the existing electronic tailgate lock/unlock function?

don Apr 02, 2018

13 answers

Hi Don, I installed this camera in my 2014 1500 RAM and have had no issues to report the rear tailgate lock is fully functional as is the camera. Great product.

fred Apr 05, 2018

The lock/unlock function worked as normal on my 2014 Ram. The hardest part of the install was finding a place to run the camera cable into the cab. I also had to find a good place to attach the ground for the camera. Attaching it to the metal of the tailgate did not work for me. I ended up running another ground into the tailgate from the chassis. After doing this the camera has been absolutely flawless.

james Apr 02, 2018

Nope. You unbolt the stock one and the new tailgate handle with camera fits right in. Looks and feels just like the stick handle. The camera module that plugs into the stereo is a pain though. And the install directions that are sent with suck.

adam Apr 02, 2018

The tail gate handle fit's and looks like a factory component.

guillermo Apr 02, 2018

Not at all. The replacement handle is the same as the factory handle with the addition of the camera. The locking mechanism is on a different wiring harness.

william Apr 02, 2018

Nope. I have a 2017 ram it works as manufacturers specifications. The lock mechanism stays on. It's a cover for it with a camera and wires. Has nothing to do with the lock. Hope this helps

melissa Apr 02, 2018

steve Apr 02, 2018

No it plugs right up. You will need to switch the old lock cylinder from the old handle to the new one. Very easy.

jeremy Apr 02, 2018

No, I installed it according to the instructions and haven't had any problems with the electronic lock/unlock.

gregory Apr 02, 2018

I installed mine on a 2016 Ram 2500. It works seamlessly with the truck. No issues with the lock & unlock function.

clayton Apr 02, 2018

No functions just like factory

bobby Apr 02, 2018

The new handle works the same as the factory equipment. The tailgate lock functions normally. Just follow the instructions and you will be fine.

david s Apr 02, 2018

No the latch is mechanical and set up the same way as the OEM handle. I rod inside the tailgate moves the latch.

justin Apr 02, 2018

why is crux back up camera on 2015 jeep rubicon with navigation killing the batter?

2gofast Aug 16, 2017

1 answer

If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can walk you through the settings on the product and see if there may be a fix. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer, or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/.

kenneth Aug 18, 2017 (Staff)

Is the handle that comes with this as solid as the original handle that it replaces? Does it feel flimsy or cheap?

scott Apr 03, 2017

3 answers

It looks and operates like the factory handle no issues with mine at all.

gregory Apr 04, 2017

It doesn't seem flimsy to me. I've had it on my truck for about a year now and haven't had any issues, although I don't use my truck as heavily as some people might. I never even think about it not being the original handle, if that helps.

allen Apr 04, 2017

The same as oe original

carmela Apr 04, 2017

SHOW MORESHOW LESS

Loading articles...