1.888.955.6000
 
 
1-888-955-6000
crutchfield.com
Crutchfield

Pro-Ject RM 1.3

Manual belt-drive turntable

Zoom
  • Pro-Ject RM 1.3

    Front

  • Pro-Ject RM 1.3

    Back

  • Pro-Ject RM 1.3

  • Pro-Ject RM 1.3

  • Pro-Ject RM 1.3

Item# 252RM13PB
 
DISCONTINUED
 
This item is no longer available to purchase.
 
Contact us for other options
 
Call   Email  
 
Original price $499.00
 
 
 
 

Our take on the Pro-Ject RM 1.3

by Dave Bar
Pro-Ject

Great looks and even better sound

The RM 1.3's striking appearance is just the beginning of this turntable's appeal. Pro-Ject follows through with a healthy dose of top-notch sound quality. When the Pro-Ject folks stopped by recently for a demonstration, we were truly impressed with just how solid this player is. It was a treat to hear the warm, detailed, and refreshingly natural sound that LPs can deliver when played back on a high-quality turntable. And it reconfirmed our belief that attention to materials and construction is essential for great vinyl sound.


Features that focus on performance

A look under the platter reveals the RM 1.3's unusual three-point MDF chassis. This triangular-shaped design helps resist vibrations that can smear sonic detail. The entire assembly rests on three nylon cone feet to further reduce noise. The RM 1.3's heavy MDF platter spins on a precision axle and bearing for excellent speed stability and smooth, silent rotation. The isolated motor assembly and belt drive system keep motor vibration away from the chassis, preventing noise from being transferred to the cartridge. An external AC power supply reduces the chance of hum, and can even be upgraded with Pro-Ject's Speed Box II for enhanced performance. And the table's S-shaped aluminum tonearm has an offset counterweight design that lowers its center of gravity to improve tracking — a big help with warped records.


Get the best sound, without the hassle

Pro-Ject knows that turntable setup can be a challenge for the novice. That's why the RM 1.3 comes out of the box virtually ready to play. Its pre-matched, factory-mounted tonearm and phono cartridge take the guesswork out of installation, so you can enjoy optimized sound quality with minimal effort. A few minutes to dial in key settings like tracking force, anti-skating, and platter speed are all that's needed to experience the superior performance that's waiting for you on your favorite records.

Highlights:

  • 12" resonance-optimized medium density fiberboard (MDF) platter with felt mat
  • precision bearing system for smooth platter rotation, greater speed accuracy, and low wow-and-flutter
  • one-piece S-shaped aluminum tonearm with eccentrically mounted counterweight for superior tracking performance on warped records
  • includes pre-mounted Sumiko Pearl moving magnet cartridge
  • tonearm offers easy adjustment of vertical tracking angle and azimuth for optimized playback performance and cartridge-matching
  • medium density fiberboard (MDF) base with three nylon cone feet to reduce noise and vibration
  • isolated motor assembly optimized for low noise and speed stability
  • manual operation with silicone-damped tonearm lift
  • 33-1/3 and 45 rpm speeds
  • speed variance: ±0.8%
  • wow and flutter: ±0.15%
  • signal-to-noise ratio: 70dB
  • detachable RCA audio cable included
  • tracking force gauge included
  • external power supply reduces likelihood of electro-mechanical interference
  • compatible with Pro-Ject Speed Box II electronic speed regulator for enhanced sound and speed-changing convenience
  • dust cover not included
  • weight: 7.3 lbs.
  • 14-15/16"W x 4-7/8"H x 13-1/2"D
  • warranty: 2 years (1 year warranty for the supplied cartridge)
  • Our 60-day money-back guarantee
  • requires a phono preamp or phono input on receiver or preamplifier
 

Hands-on research from the Crutchfield Labs (what are the Labs?)

Product Research
What's in the box?

Download owner's manual

  • Turntable (tone-arm and cartridge installed)
  • Platter
  • Motor
  • AC power adapter (with attached 6.5' DC cord)
  • Drive belt
  • 47" Stereo RCA audio cable (with ground wire)
  • Counter weight
  • Anti-shake weight
  • Felt platter pad
  • 45 RPM adapter
  • Head-shell weight
  • Stylus pressure gauge
  • 2 Hex-keys (large/small)
  • Instructions for Use
  • Two-Point Cartridge Alignment Protractor

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features
Specifications

Features

Overview: The Pro-Ject RM-1.3 Genie is a manual belt-driven turntable with a fitted MM-cartridge (Sumiko Pearl). Its 12" resonance-optimized MDF platter rests upon a three-point MDF plinth with an isolated motor assembly optimized for low noise and speed stability. A single-piece fixed headshell & S-shaped tone-arm features hardened stainless steel bearings and a rigid aluminum tube to provide superb tracking. Three nylon cone feet further reduce noise and vibration.

Belt Driven: The Pro-Ject RM-1.3 Genie features a quiet running synchronous motor with a two-step pulley that drives the platter's outside edge via a silicone belt. The RM-1.3 Genie supports 33-1/3 and 45 rpm speeds.

Note: The optional Pro-Ject Speed Box II (252SBIIB, sold separately) can be connected to the turntable to change speeds electronically between 33-1/3 and 45 rpm.

Isolated Motor: The drive motor of the RM-1.3 Genie is isolated on its own platform and completely decoupled from the turntable's plinth to eliminate vibration transmission.

MDF Plinth: The Pro-Ject RM-13 features three-point MDF (medium density fiber) plinth for exceptional stability.

Optimized Platter: The 12" resonance-optimized platter is made of MDF (medium density fiber) to resist vibration. It comes with a felt mat.

Inverted Bearing Assembly: The RM-1.3 incorporates an inverted chrome plated stainless steel axle that rests on a polished steel bearing in a bronze housing for low wow-and-flutter and speed accuracy.

RCA Connection with Grounding Screw: Connection to the phono input of your amplifier can be made with connecting cables of your choice through the turntable's gold-plated stereo RCA phono jacks and grounding screw.

Note: The Pro-Ject turntable comes supplied with a 47" stereo RCA cable with ground wire.

External Power Supply: The RM-1.3 Genie utilizes an external power supply to avoid potential electro-mechanical interference.

S-Shaped Tone-arm: The RM-1.3 Genie features an 8.6" long S-shaped tone-arm. The headshell and arm-tube are fashioned from a single piece of aluminum for increased rigidity. The solid arm-base permits accurate height adjustment of arm-tube and VTA (vertical tracing angle). The tone-arm's horizontal bearings consist of two hardened stainless steel points for added stability. A single fixing screw allows arm-tube rotation for easy adjustment of needle azimuth despite a fixed headshell.

MM-Cartridge: The turntable is supplied with a Sumiko Pearl fitted MM-cartridge. This moving magnet phono cartridge features an alloy cantilever, bonded elliptical stylus, and 4.0mV output

Note: If your amplifier does not have a suitable Phono MM input, you will require a separate phono pre-amplifier (252PBIIB, sold separately) to connect the turntable to your amplifier.

Internal Wiring: The tone-arm's internal wiring consists of silver coated, high-purity copper for accurate analog signal transfer.

Eccentrically-Mounted Counterweight: The eccentrically mounted counterweight reduces cantilever forces and dynamic wow when playing warped records. The counterweight is suitable for cartridges weighing between 0.14-0.317 oz (4-9g).

Nylon Feet: Three nylon spiked feet provide additional stability to the turntable.

Note: The turntable should be positioned on a low-resonance surface such as wood or multiple layer ply-board to avoid structural vibrations disturbing replay.

Specifications

Filter Cartridge: Sumiko Peral (output voltage: 4mV)

Amplifier Connection: MM-input (recommended load resistance: 47 kohms)

Nominal Speeds: 33-1/3, 45 rpm

Tone-arm Length: 8.6" (218.5mm)

Tone-arm Mass: 0.299 oz (8.5g)

Overhang: 0.748" (19mm)

Counterweight: 0.14-0.317 oz (4-9g)

Speed Variance: +/-0.8%

Wow & Flutter: +/-0.15%

Signal-to-Noise: -70 dB

Down-force Range: 15-30 mN

Power Consumption: 2W

Outboard Power Supply: 15V/550 mA AC (AC 120V / 60Hz, 13.0W)

Dimensions: 14.9375" (wide) x 4.875" (tall) x 13.5" (deep)

Weight: 7.275 lbs (3.3kg)

 
Be the first to review this product
Great Gear Giveaway rewards card

Submit a review and you will be entered to win a $150 gift card

Crutchfield Great Gear Giveaway Official Sweepstakes Rules

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Add accessories for the Pro-Ject RM 1.3

Keep the music playing with replacement cartridges and other accessories. See all categories & accessories

Sumiko Oyster Moving-magnet phono cartridge
1 person says
Your Price: $75.00
Add to Cart
Sumiko Black Pearl Moving-magnet phono cartridge
3 people say
Your Price: $100.00
Add to Cart
Sumiko Pearl Moving magnet phono cartridge
9 people say
Your Price: $125.00
Add to Cart
Pro-Ject Speed Box S Electronic speed control for Pro-Ject turntables (Silver)
5 people say
Your Price: $129.99
Add to Cart
Sumiko Blue Point No.2 Moving-coil phono cartridge
1 person says
Your Price: $399.00
Add to Cart
Pro-Ject Phono Box DC Phono preamplifier (Black)
7 people say
Your Price: $149.99
Add to Cart
Pro-Ject Tube Box S Vacuum tube phono preamplifier
4 people say
Your Price: $449.99
Add to Cart
Pro-Ject Phono Box S Phono preamplifier (Black)
7 people say
Your Price: $199.99
Add to Cart
Pro-Ject Phono Box USB Phono preamp with USB output
Your Price: $189.99
Add to Cart
NAD PP 2e Phono preamplifier
Your Price: $169.99
Add to Cart
Cambridge Audio Azur 551P Phono preamplifier for moving magnet cartridges (Black)
11 people say
Your Price: $149.99
Add to Cart
NAD PP 4 Digital phono preamplifier with USB output
2 people say
Your Price: $199.99
Add to Cart
Cambridge Audio Azur 651P Phono preamplifier (Black)
7 people say
Your Price: $249.99
Add to Cart
Panamax MD2 Space-saving surge protector with two outlets
6 people say
Your Price: $39.99
Add to Cart
Monster PowerCenter AV 750 Surge protector
5 people say
Your Price: $49.99
Add to Cart
1 person says
Your Price: $29.99
Add to Cart
AudioQuest Evergreen Stereo interconnect cable with RCA plugs (0.6 meter/2 feet)
31 people say
Your Price: $31.99
Add to Cart
Monster Cable Stereo Audio 400i Stereo interconnect cables with RCA plugs (1 meter/3.3 ft.)
4 people say
Your Price: $39.95
Add to Cart
AudioQuest Golden Gate Stereo interconnect cable with RCA plugs (0.6 meter/2 feet)
15 people say
Your Price: $64.99
Add to Cart
AudioQuest Big Sur Stereo interconnect cable with RCA plugs (0.6 meter/2 feet)
2 people say
Your Price: $96.99
Add to Cart
AudioQuest Sydney Stereo interconnect cable with RCA plugs (0.6 meter/2 feet)
4 people say
Your Price: $154.99
Add to Cart
AudioQuest Columbia Stereo interconnect cables with RCA plugs (2-meter/6.6 feet)
1 person says
Your Price: $644.99
Add to Cart
7 people say
Your Price: $14.99

After $10.00 Price Break

Add to Cart

Why choose SquareTrade?

The #1-Rated Protection Plan

Thousands of people have reviewed SquareTrade Protection Plans — and made us #1.

5-Day Service Guarantee & Free Shipping

We'll repair or replace your item in five business days or less after we've received it, or your plan is free. And, as always, we pay for all shipping.

Protection from Normal, Everyday Use

Repairing your average mechanical or electrical failure can cost as much as buying a new device. With SquareTrade, you're covered — including parts and labor.

3 Year Protection Plan
3 Year Protection Plan
Your Price: $69.99
Add to Cart

For a more in-depth review and enhanced detailed information on the Pro-Ject RM 1.3, please visit the Crutchfield website product page (/ISEO-rccbcspd/p_252RM13PB/Pro-Ject-RM-1-3.html ).