Features

Overview: The Epson PowerLite Home Cinema 3010e is a Full HD 1080p LCD projector with WirelessHD and 3D capability. With the Home Cinema 3010e, you can project movies, videos, games, slideshows, and presentations up to 300" (diagonally). It comes with a WirelessHD Transmitter and a built-in receiver so you won't have to run a signal cable to the projector. The Home Cinema 3010e also has built-in 10-watt stereo speakers.

C²Fine 3LCD, 3-chip Technology: The Home Cinema 3010e features C²Fine 3LCD, 3-chip technology to give you rich, vibrant images for enjoying spectacular movies, games, and sporting events in your home, or to deliver sizzling business presentations at the office. This technology requires 25% less electricity per lumen of brightness when compared to 1-chip DLP projectors.

WirelessHD: The Home Cinema 3010e allows you to wirelessly stream HD content from a video device to the projector. The supplied WirelessHD transmitter operates in the 60 GHz band, and has a single HDMI input for connecting your HDTV set-top box, DVD, or Blu-ray player. The transmitter should be placed within 32' of the projector. When the WirelessHD transmitter is powered on, "WirelessHD" appears as one of the source options. The transmitter is 6.1"W x 2.3"H x 2.4"D, and weighs 6.4 ounces.

3D Mode: To view 3D content, you must first connect a 3D-compatible video device to one of the HDMI ports, and use the optional Epson M-3Di active shutter glasses (item # 278AS3DG). An external 3D IR emitter (# V12H484001) is available from the manufacturer if you cannot view the 3D image normally, or if the projector is located more than 16-1/2 feet from the viewing area.

Projection Lamp: The projector uses an energy-efficient E-TORL 230-watt Ultra High Efficiency (UHE) lamp with a life span of approximately 4000 hours in the Normal Mode. In the ECO mode, the life span is increased to approximately 5000 hours. The lamp (Part # V12H010L68) and air filter (Part # V13H134A38) are the only user-serviceable parts.

Fan Cooled: The projection lamp is kept cool by a fan. The fan noise level is 32dB in Normal mode and 24dB in ECO mode. If the projector is to be used at an altitude above 4921 feet (1500 meters), the High Altitude Mode should be turned on so the fan can properly cool the projector at the high altitude air pressure.

Light Output: In the normal mode, the PowerLite Home Cinema 3010e outputs 2200 lumens of white light and 2200 lumens of color light for bright, balanced colorful images. The white light output is measured using ISO 21118, a more rigid standard than the ANSI lumens rating used by many competitors. Light output in the ECO mode is 1000 lumens. The projector is capable of a dynamic contrast ratio up to 40,000:1 (auto iris on) in 2D mode, and up to 1600:1 in 3D.

Native Resolution: The PowerLite Home Cinema 3010e has a native resolution of 1080p (1920 x 1080; 16:9 aspect ratio). The total number of pixels is 2,073,600 dots (1920 x 1080) x 3. You can resize the picture by changing the aspect ratio to 4:3 or 16:10.

Lens: The Home Cinema 3010e features a F1.51-1.99 lens with a focal length of 18.2mm to 29.2mm. It has a manual focus and a manual zoom ratio of 1.0 to 1.6. The projector automatically compensates for vertical keystone distortion (+/- 30°) when it is tilted upward or downward. Manual horizontal keystone adjustments (+/- 30°) can be made using the top-mounted slide control. The projector does not have a lens shift feature.

Multiple Sources: The PowerLite Home Cinema 3010e has inputs for multiple sources to give you lots of choices. For connecting to your video equipment, the unit features two HDMI (Ver.1.4) inputs, a component video input, and a composite video input. You can also connect your computer to the projector via the VGA input (D-Sub 15-pin). The unit also has a stereo RCA audio input.

HDMI Link: When you connect HDMI CEC-compatible devices, such as a receiver or DVD player, to the projector via HDMI cables, you can control them using the HDMI-Link control buttons on the projector's remote control. You can register the devices you want to operate in the HDMI Link section of the projector's menu.

Input Signals: The projector will accept the following input types:

• Composite: NTSC, NTSC 4.43, PAL, M-PAL, N-PAL, PAL60, SECAM
• Component: 480i, 576i, 480p, 576p, 720p, 1080i, 1080p
• External Source: Blu-ray, HD-DVD, DVD (Region Code 1)

USB Storage Devices: Using the projector's Type A USB port on the rear panel, you can connect a USB storage device, such as a USB flash drive or digital camera and project still images (JPEG, BMP, GIF, and PNG). The device must be USB Mass Storage Class compatible, and the images formatted in FAT or FAT32. The images can be displayed in a "contact sheet" fashion to help you locate specific photos, in full-screen manually one at a time, or automatically in a slide show with custom settings.

Color Modes: The PowerLite Home Cinema 3010e offers six color modes to optimize viewing for different environments and image content. The Color Mode adjusts the brightness, contrast, and color for the best possible picture. A different color mode can be selected for each input source. You can select from the following choices:

• Auto: automatically adjusts to the brightness of your surroundings
• Dynamic: for projecting the brightest picture available
• Living Room: for watching television programs during the day
• Cinema: for viewing movies in a dimly lit room
• 3D Dynamic: for projecting the brightest 3D picture available (3D mode only)
• 3D Cinema: for viewing 3D movies in a dimly lit room (3D mode only)

Advanced Color Adjustments: You can adjust the gamma and individual RGBCMY color tones using the remote control. There are five gamma settings to choose from (2.0 to 2.4), or you can customize your own settings from your image or a displayed graph. You can also individually adjust the hue, saturation, and brightness for each of the red (R), green (G), blue (B), cyan (C), magenta (M), and yellow (Y) components.

Auto Iris: The Auto Iris system constantly controls the light output based on the gamma and black/white levels of the projected content to give you perfectly adjusted images and deepest blacks. Using the remote, you can select either Normal or High Speed to indicate how quickly you would like the projector to respond to changes in the brightness of the image.

Adjustable Image Size: The PowerLite Home Cinema 3010e projector can produce an image that is adjustable between 30" and 300" (measured diagonally).

Lens Projection Distance: The projector's adjustable lens provides a wide range of placement possibilities for a given screen size. The projection distance (distance from lens to screen) range is 2.85' to 47.57'. The distance for several screen sizes at 16:9 and 4:3 aspect ratios are given below:

Split Screen Mode: The Home Cinema 3010e's Split Screen mode allows you to simultaneously project two images from different image sources next to each other. The side-by-side images can be equal size or one larger than the other. You can also choose which audio source you want to hear between the displayed images. The Split Screen mode is not available in 3D mode, or when USB is the active display source.

Sleep Mode: The projector turns off automatically when no video signal is received for a preset amount of time. You can set the sleep mode to 5, 10, or 30 minutes.

Remote Control: In addition to the control panel, the projector can be controlled by the supplied wireless remote control, which has a range of approximately 32 feet. The projector has infrared receivers on the front and rear to give you control from most anywhere in the room. An RS-232C port is included for connecting the projector to a 3rd party A/V controller or automation system.

Mounting Options: The PowerLite Home Cinema 3010e can be placed on a tabletop or inverted and mounted on the ceiling. It can be used for front or rear projection. For tabletop use, you can adjust the image position by raising or lowering the front feet. For ceiling mounting, you will need an optional projector ceiling mount. Four 4mm threaded screw holes are provided on the bottom for a ceiling mount. A commercially-available Kensington security lock can be attached to the unit to prevent theft when installed in a public location.

Warranty and Extra Care Home Service: The projector is covered by a 2-year parts and labor warranty, while the lamp is covered for 90 days. Included with the warranty, Epson offers Extra Care Home Service. A replacement unit (in most cases, a refurbished unit) will be shipped to you immediately. (A credit card is required for security deposit.) If it's important that you receive your original projector back, you should use the basic carry-in service instead of Home Service.