OnStar® FMV Cam Lock Mounting Kit
Mount the OnStar FMV mirror in select vehicles
Item #: 293CAMLCKT
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
Item #: 293CAMLCKT
Use this mounting kit to install the OnStar FMV mirror in your vehicle — it works your vehicle's original Cam Lock-style mirror mount. Please give us a call to make sure this is the right mounting kit for your vehicle. Warranty: 1 year.
Sorry, we cannot ship this mounting kit by air or to Alaska, Hawaii, Puerto Rico, or other U.S. territories.
I am glad that this was sent to me it made alot of difference for vehicle.
Pros: It fit.
Exact replacement I needed. Fits & works perfectly.
Pros: Easy installation
Our purchase experience was very satisfactory. Delivery was prompt. Installation...not so much.
Pros: Product works fine.
Cons: Designated installers cracked the windshield during installation. After it was replaced it was determined that it had been improperly wired during the original installation so we had no OnStar service for three weeks when the problem was finally resolved, But other than that the product we bought was fine and delivery was prompt.
Overview: The Cam Lock Installation Kit is designed specifically to mount the OnStar FMV to the windshield of compatible vehicles that use a cam lock mounting system to secure the factory rearview mirror. The Cam Lock Installation Kit consist of the following:
Removing Factory Mirror: Grasp the base of the mirror and rotate 90-degress counterclockwise. Slide the mirror down toward the dash to remove. No tools are required.
Cleaning & Prepping Windshield: Scrape the windshield with a razor blade to remove any residue or contaminates (maybe clear and not visible to the naked eye). With the provided alcohol wipes, thoroughly clean the glass mounting area. Then apply primer to this area of the windshield (keep dashboard covered to catch drips and prevent staining). Allow a minimum of 6 minutes for primer to dry before applying the adhesive.
Installing Cam Lock Mount Adapter: Slide the cam lock adapter up into the factory cam lock mount on the windshield of the vehicle. Ensure the adapter is seated all the way up into the mount. Hand tighten the set-screw using a 1/64" Allen wrench. Apply electrical tape along the sides and top of the mount adapter; use a flat-edged tool to make a tight seal between the tape and windshield to keep adhesive from squeezing out when injecting the adhesive.
Note: If the adapter starts to push away from the windshield, it is too tight.
Applying Adhesive: Using only the adhesive provided, insert the syringe into the fill holes at the top of the adapter and slowly depress the plunger. The cam lock installation kit includes 2 dual syringes. Cover the dashboard to avoid damage from drips. The adhesive starts to set within 5-10 minutes of applications. After 10 minutes, you may mount the OnStar FMV Mirror.
Note: Allow at least 20 minutes for the adhesive to fully cure at room temperature before driving the vehicle.