About the OnStar® FMV Cam Lock Mounting Kit
Use this mounting kit to install the OnStar FMV mirror in your vehicle — it works your vehicle's original Cam Lock-style mirror mount. Please give us a call to make sure this is the right mounting kit for your vehicle. Warranty: 1 year.
Sorry, we cannot ship this mounting kit by air or to Alaska, Hawaii, Puerto Rico, or other U.S. territories.
What's in the box:
OnStar® FMV Cam Lock Mounting Kit owner's manual
- Cam lock installation bracket
- Tube of 1-step glass primer
- 2 Dual self-adhesive syringes
- 2 Alcohol prep-pads
- Installation Instructions
Customer reviews for OnStar® FMV Cam Lock Mounting Kit
Loading...
Loading reviews...
Average review:
4.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the OnStar® FMV Cam Lock Mounting Kit
Product Research
Features
Overview: The Cam Lock Installation Kit is designed specifically to mount the OnStar FMV to the windshield of compatible vehicles that use a cam lock mounting system to secure the factory rearview mirror. The Cam Lock Installation Kit consist of the following:
- Cam lock installation bracket
- Tube of 1-step glass primer
- 2 Dual self-adhesive syringes
- 2 Alcohol prep-pads
- Installation Instructions
Removing Factory Mirror: Grasp the base of the mirror and rotate 90-degress counterclockwise. Slide the mirror down toward the dash to remove. No tools are required.
Cleaning & Prepping Windshield: Scrape the windshield with a razor blade to remove any residue or contaminates (maybe clear and not visible to the naked eye). With the provided alcohol wipes, thoroughly clean the glass mounting area. Then apply primer to this area of the windshield (keep dashboard covered to catch drips and prevent staining). Allow a minimum of 6 minutes for primer to dry before applying the adhesive.
Installing Cam Lock Mount Adapter: Slide the cam lock adapter up into the factory cam lock mount on the windshield of the vehicle. Ensure the adapter is seated all the way up into the mount. Hand tighten the set-screw using a 1/64" Allen wrench. Apply electrical tape along the sides and top of the mount adapter; use a flat-edged tool to make a tight seal between the tape and windshield to keep adhesive from squeezing out when injecting the adhesive.
Note: If the adapter starts to push away from the windshield, it is too tight.
Applying Adhesive: Using only the adhesive provided, insert the syringe into the fill holes at the top of the adapter and slowly depress the plunger. The cam lock installation kit includes 2 dual syringes. Cover the dashboard to avoid damage from drips. The adhesive starts to set within 5-10 minutes of applications. After 10 minutes, you may mount the OnStar FMV Mirror.
Note: Allow at least 20 minutes for the adhesive to fully cure at room temperature before driving the vehicle.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
I needed this piece to mount my OnStar* mirror that I purchased in 2009. OnStar no longer make these mirrors. Thank GOD Crutchfield had the mounting kit I needed for installation.
AprilNCT from Hartford, CT