At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Features
Connections, Controls and
Indicators
Specifications
Features
Overview: This surge protector
is designed to plug directly into a standard grounded wall outlet. It has two
3-prong outlets (one on each side), and is designed to be used with electric
equipment that does not require any additional line protection (such as
telephone or cable). It is ideal for copiers, printers, radios, and appliances.
Lifetime $5,000,000 Connected
Equipment Warranty: Panamax will replace, pay to replace at fair market
value, or pay to repair, up to $5,000,000 equipment that is damaged by an AC
power or lightning surge while connected to a properly installed Panamax surge
protector, if the surge protector shows signs of surge damage or is operating
outside of design specifications. For conditions and information on how to make
a claim please see the manual.
Protect or Disconnect™ Circuitry:
This circuitry safeguards equipment against all surges, no matter how big.
In the event of a catastrophic surge such as lightning, it completely
disconnects AC power to connected equipment.
Catastrophic Surge Circuit:
This circuit opens automatically preventing damage if surge exceeds protection
capability
Thermal Fuse: In case of
extended over voltage, the thermal fuse shuts off power to connected equipment.
Diagnostic Indicators: This
surge protector features Protection OK, Ground OK, and Line Fault lights to keep
you informed of AC outlet status at all times.
Plugs Directly into Wall: The
MAX 2 protects two AC lines by easily plugging into wall. Side-mounted
outlets allow furniture to be moved closer to wall and accommodate the widest
range of plug styles including transformers and right-angle plugs.
Enhanced Two-Stage EMI/RFI
Filtration: Reduces unwanted interference and noise.
Power Cord Security: Attach
your equipment's power cords to the surge protector using convenient zip-ties.
Connections,
Controls and Indicators
Outlets:
- 2 AC Power Outlets: always
On and four Switched outlets
Status Indicators:
- Power/Protection OK: green
LED which indicates that the surge protector is functioning properly, power
is On, and it is protecting all connected equipment
- Line Fault: red LED which
indicates that wall outlet is improperly wired or no ground is present
- Ground OK: green LED which
indicates that the wall outlet is properly grounded
Specifications
AC Specifications:
- Initial Clamping Level: 200
Volts
- UL 1449 Suppression Rating:
330 Volts
- Protection Modes: L to N, L
to G, N to G
- Maximum Current Rating: 15A
(1800 W)
- EMI/RFI Noise Filtration: 50
dB (100kHz to 1 MHz)
- Response Time: less than 1
nanosecond
- Signal Pulse Energy Dissipation:
1350 Joules
- Peak Impulse Current: 52,000
amperes
