Inputs and Outputs Notes
Integrated HDTV Tuner: The TV
has a built-in over-the-air HDTV (ATSC) tuner, so you don't have to purchase a
separate digital set-top box to receive and decode over-the-air HDTV/SDTV
signals. The TV also has a 181-channel NTSC analog tuner. An additional QAM
tuner decodes unscrambled digital cable signals.
Native Resolution: The LN-T4071F has a display resolution of 1920 x 1080 and scales
all inputs for display at 1080p. The HDMI and component video inputs will accept
1080p, 1080i, 720p, 480p, and 480i
signals. Full HD, or 1080p, contains
1.5 times more scanning lines than conventional HD TVs. More scanning lines mean
more pixels, more details and a better picture.
Digital Natural Image Engine
(DNIe): Samsung's exclusive Digital Natural Image engine dramatically
improves the picture by enhancing the contrast, detail, and white balance, and
reducing noise. DNIe can be turned
off, or a demo mode shows a split screen with a DNIe enhanced picture on the
right and DNIe off on the left.
Auto Motion Plus 120Hz:
Auto Motion Plus 120Hz offer faster frame rates for
a clearer picture. This technology doubles the frame rate from 60 to 120 frames
per second (120Hz LCD panel) without repeating the same image to make more
frames. The TV intelligently calculates the 'middle' image between frame A and
frame B and inserts it in between (Auto Motion Plus 120Hz processor), making a
fluid transition from one frame to the next.
Wide Color Enhancer: Samsung's exclusive
Wide Color Enhancer technology delivers more brilliant colors, even in bright
areas of the picture where blues and greens are washed out on conventional
screens. The system displays wider color reproduction, showing you truer colors
such as the fresh green of spring foliage, the intense blue of the summer sky.
Super Clear Panel:
Samsung's super clear panel offers exceptional image clarity, highlighting black and
darkened areas, enabling vibrant, more compelling colors and a brighter, clearer picture.
Dynamic Contrast: The television's 25,000:1 Dynamic Contrast Ratio will give you a picture
with whiter whites, blacker blacks and a nearly infinite subtlety of gradations in between.
Picture Sizes: You can choose
one of the following picture sizes:
sets the picture to 16:9 wide mode
vertically enlarges the size of the picture and allows you to move the
enlarged picture using the arrows on the remote
Zoom 2: vertically enlarges the size of the picture more than Zoom 1 and allows you
to move the enlarged picture using the arrows on the remote
proportionally enlarges the picture to fit the entire screen without
changing the aspect ratio
4:3: sets the
picture to 4:3 normal mode with pillars on the left and right of the screen
see the full 720p, 1080i, or 1080p image with no resizing
Picture Control: each input saves
its own setting:
- Automatic Picture Settings: choose one of three automatic picture settings:
- Standard: resets the
standard factory settings
- Dynamic: increases clarity and
natural image without enhancements
- Manual: manually adjust
and store the following settings:
- Tint (G/R)
- Backlight: adjust the screen
brightness by adjusting the backlight intensity
- Color Tone: adjust the
overall color tone using one of five presets:
- Cool 1
- Cool 2
- Warm 1
- Warm 2
- Black Adjust: screen depth
is adjusted using Black Level, settings include:
- Off: turns off the black
- Low: sets black color
depth to low
- Medium: sets black color
depth to medium
- High: sets black color
depth to high
- HDMI Black Level: the black
level can be set to Normal or Low when using an HDMI (RGB) input
- Dynamic Contrast: adjust
contrast to optimize the picture:
- Off: turns off the
dynamic contrast adjustment feature
- Low: sets dynamic
contrast to low
- Medium: sets dynamic
contrast to medium
- High: sets dynamic
contrast to high
- Gamma: adjust the middle
brightness of the picture
- Color Space: select the
color space for the most natural color:
- Wide: offers deep and
- Auto: automatically
adjusts color tone based on the program source
- White Balance: adjust the
color temperature for more natural colors
- R offset: adjusts red
- G offset: adjusts green
- B offset: adjusts blue
- R gain: adjusts red
- G gain: adjusts green
- B gain: adjusts blue
- Reset: return to factory
- My Color: adjust to your
- Pink: darken or lighten
the pink colors
- Green: darken or lighten
the green colors
- Blue: darken or lighten
the blue colors
- White: darken or lighten
the white colors
- Reset: return to factory
- Edge Enhancement: edge
enhancement emphasizes the boundaries of an object, it can be turned off if
- xvYCC: extended colors
(relative to the NTSC standard) are supported using xvYCC, this can be
turned of if you prefer
- Active Color: active color
emphasizes the colors of the sky and grass, for a more vivid picture
Film Mode: You can manually set the frame
rate to film (vs. video) when using the TV tuner, composite input, S-video
input, or a component video with 480i input signal.
Game Mode: The Game
mode enhances dark areas, sharpens the picture, speeds up the image processing
response, and enhances the sounds of your games.
Wiselink: A side-panel USB port allows you to connect a USB mass
storage device (MSC) to view JPEG files and play MP3 audio files. You have access to
the following functions:
Anynet+: Anynet+ is an AV network system that enables you
to control other components with your Samsung TV's remote.
The Anynet+ system can be used only with Samsung AV devices that support the
Anynet+ feature and are connected with HDMI 1.3 cables. The Anynet+ feature must
be turned on in the menu to function. Anynet+ can support up to 12 AV devices in
PC-Capable: This unit has a
15-pin D-Sub (RGB) input that allows you to use it as a high-resolution computer
monitor. The HDMI 1 input can also be used with a computer. The TV can be set to automatically adjust to the video signals
received, or you can use the setup menu to adjust the screen quality and
position. No cables are supplied for connecting the TV to a PC.
Picture-In-Picture (PIP): The Picture-In-Picture feature
allows you to watch two video sources (TV, VCR, DVD) simultaneously. The
Picture-In-Picture feature allows you to view an analog TV broadcast on the PIP
screen (sub-picture) when the main picture is from an external device connected
by HDMI, Component or PC. The TV has only one tuner, so you cannot watch two TV
channels at the same time. There are three PIP views: Double Window
(side-by-side split screens and each screen has a 4:3 aspect ratio), Double Wide
(side-by-side split screens and each screen has a 16:9 aspect ratio), or
standard picture-in-picture (a small window inside the full screen). In the
standard picture-in-picture mode, the inset PIP window can be moved to any of
the screen's four corners. PIP will not work while the V-chip or xvYCC is in
Input Source Names: You can
assign a preprogrammed name to each of the inputs. When input
naming is completed, you will no longer have to remember which component is
connected to each input when selecting a source to watch. Source names include
VCR, DVD, D-VHS, Cable STB, HD STB, Satellite STB, PVR STB, AV Receiver, DVD
Receiver, Game, Camcorder, DVD Combo, PC, VOD STB, and TV.
Channel Labels: Each analog
channel programmed into memory can be labeled with a name up to 5 characters.
Digital channels names are already assigned and cannot be edited.
Favorite Channel: You can
create a list of your favorite channels and recall the list using the FAV.CH
button on the remote.
Freeze: The still button allows you to freeze an image on the screen, it can only
be activated from the remote control. When you freeze the picture the audio
Digital Signal Strength Meter:
The digital signal strength meter can be used to help you find the antenna
position that delivers the highest HDTV digital signal strength.
Analog Channel Fine Tuning:
fine tuning feature allows you to manually adjust analog channels for optimal
reception. A separate fine tuning setting may be put into the TV's memory for
each analog channel.
Low Noise Amplifier (LNA): In a weak
signal area reception
might be improved by boosting the incoming signal using the LNA function. A
separate LNA setting may be put into the TV's memory for each channel.
Digital Noise Reduction: If the
broadcast signal received by your TV is weak, you can activate the Digital Noise
Reduction feature to help reduce any static and ghosting that may appear on the
Auto Volume: Auto volume
automatically adjusts the volume of the desired channel, lowering the sound
output when the modulation signal is high or raising the sound output when the
modulation signal is low. This reduces the difference in volume when changing
Settings: You can choose from
the following sound settings:
Standard: resets the standard factory settings
for watching music videos and concerts
Movie: for watching movies
for watching a show that is mostly dialog
Custom: adjust the 5-band EQ; 100 Hz, 300 Hz, 1 kHz, 3 kHz, and 10 kHz
TruSurround is a patented SRS technology for playing
5.1 multi-channel content using only two speakers, it delivers a
virtual surround sound experience through two speakers (internal or
external), it is fully compatible with all multi-channel formats
V-Chip: The V-Chip
feature automatically locks out programs that are deemed inappropriate for
children based on the user selected parental guidelines. The user must enter a
4-digit password before any of the V-Chip restriction are set up or changed.
Sleep Timer: The
sleep timer switches the television off after a specified amount of time. The
sleep timer can be set to 30, 60, 90, 120, 150, or 180 minutes.
On/Off Timer: The
three On/Off timers allow you to program the television to turn itself on and off by
selecting a specific on time and a specific off time. You also choose the On
Timer's channel and Volume. The on and off timers work independently of one
Energy Saving Feature:
This feature adjusts the brightness of the TV in order to reduce power
consumption. You can select from the following Energy Saving modes - Low,
Medium, High, Auto, or Off.
On/Off Melody: A
unique melody plays when the TV is turned on and off. The melody volume is
adjustable, or you can turn this feature
off if you prefer.
Function Help: With the function help feature turned on, each time you highlight a function in
the menu, a brief description of the function is also displayed.
The LN-T4071F comes with a table-top stand for easy placement on top of a
counter or table. On the stand, the TV can swivel 20° left or right.
You can remove the stand and mount this display on the wall using an optional wall-mount bracket. The
TV has four threaded screw holes spaced to accommodate many universal wall mount
brackets. The hole spacing is 200mm x 200mm, and the holes require M6 (6mm) machine screws.
Kensington Lock: When mounting
the monitor in a public place, you can secure it with an optional anti-theft
device called a Kensington Lock. This TV has a slot on the rear panel to
accommodate a Kensington Lock device.
Multi-brand Remote: The supplied remote is
pre-programmed to operate this unit and a number of functions on other brands of
components, including VCRs, cable boxes, DVD players, and set top boxes. The
remote features an illumination button that lights up the Source, Volume Up/Down
and Channel Up/Down buttons when pressed. These button only remain lit for a few
seconds and then turn off to save power. This function is convenient for using
the remote at night or when dark.
Inputs and Outputs Notes
Side Panel Inputs:
The TV features a set of jacks on the side panel for easy connection:
Wiselink (USB type A)
AV in 2 (S-video, composite
video, RCA stereo audio)
Headphone out (3.5mm), the TV's
internal speakers are muted when you plug in headphones
HDMI: There are three HDMI terminals,
two on the rear panel and one on the side. HDMI 1 can be
used for a DVI-equipped component; it has a separate analog audio connection and a DVI-to-HDMI adapter will be needed. HDMI 1 can also be used to connect a
computer. The HDMI jacks accept 1080p, 1080i, 720p,
480p, and 480i signals.
PC: This input
consists of a stereo mini-jack and an analog RGB (D-Sub 15-pin) jack.
Inputs: The 2 sets of component video
inputs will accept 1080p, 1080i, 720p, 480p and 480i signals.
Antenna Inputs: There are two antenna inputs; Ant 1 In (air) and Ant 2
Digital Audio: The
optical digital output on the rear panel will output Dolby
Digital (when available) or 2 channel PCM.
Ex-Link: This jack connects
to an optional Samsung wall mount bracket that will allow you to adjust the TV
viewing angle using the television's remote control.