1-888-955-6000
crutchfield.com
Crutchfield

Bell'O SP-224

24" speaker stands

Zoom
  • Bell'O SP-224

    Front

  • Bell'O SP-224

    Shown with speakers attached (not included)

 

Our take on the Bell'O SP-224

by Kristen Schaub
Bell'O

These distinctive speaker stands measure 24" tall and feature sturdy steel frames that hold up to 100 pounds. Use the included hook-and-loop adhesive strips to securely mount your speakers on the top plates. The columns of the stands also come with wire guides to help you cleanly route wire to your speakers. Plus, you get flat feet to protect hardwood floors and floor spikes for extra stability on plush carpets.

See more info on this item

Highlights:

  • stand height: 24"
  • supports up to 100 lbs.
  • black, all-metal steel frame
  • comes with hook-and-loop adhesive strips for securely mounting speakers
  • speaker wire guides help minimize cable clutter
  • flat feet to protect wood or tile floors
  • carpet spikes for stable placement on carpeted floors
  • top plate: 7"W x 7"D
  • base: 13-1/2"W x 11"D
  • weight: 12 lbs. (each)
  • warranty: 1 year
  • Our 60-day money-back guarantee

Hands-on research from the Crutchfield Labs (what are the Labs?)

Product Research
What's in the box?

Download owner's manual

  • 2 Center columns (speaker stand)
  • 4 Curved base sections
  • 8 Plastic levelers
  • 8 Leveler spikes
  • Four 12mm screws
  • Four 18mm screws
  • 8 Threaded washers
  • 4 Washers
  • Allen wrench
  • Assembly Instructions

Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features

Overview: The Bell'O SP-200 is a pair 24" black finish speaker stands. Its distinctive 24" tall steel frame design features an elegant black finish. Hook-and-loop adhesive strips are included for securely mounting speakers and integrated wire management hides your speaker wire. Flat and spiked feet are included for carpet or hardwood floor use.

Dimensions:

  • Overall Dimensions: 13.5" (w) x 24" (h) x 11" (d)
  • Top Plate: 7" (w) x 7" (d)
  • Base: 13.5" (w) x 11" (d)
  • Weight Capacity: 100 lbs
 
Review this product
Great Gear Giveaway rewards card

Submit a review and then enter to win a $500 rewards card

Bell'O SP-224 Reviews

Average Customer Review:

4 people say:

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left
Filter by rating:
1 out of 5

Does Bello have a quality control program?

Written By Dave, CA on Saturday, January 12, 2013
Crutchfield Customer Review (What's this?)
 
I would give them no stars if I could. The materials are OK but the bends and cutt ends are not straight so it does not stand vertical. The speaker mounting plates are not level side to side. Poor manufacturing tolerances.
Pros:
None. Could be good stands if they were properly manufactured.
Cons:
They are junk.
5 out of 6 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Perfect

Written By Rick, Fort Worth, TX on Wednesday, October 24, 2012
Crutchfield Customer Review (What's this?)
 
Great looking stands and easy to put together!
1 out of 2 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

sturdy and looks like art speaker stands

Written By william, ky. usa. on Friday, September 07, 2012
Crutchfield Customer Review (What's this?)
 
very nice looking and strong speaker stands with hook and loop straps that really make the speakers stay put, very hard to knock off. they havent been. if you like classy looking stands then buy these.
Pros:
look beautiful and will last a lifetime.
Cons:
they were a little tough to put together you might need two people i did them by myself, once i put them together though was very pleased.
2 out of 2 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Great stands, reasonably priced

Written By JohnMichael, Central Ohio on Friday, August 31, 2012
Crutchfield Customer Review (What's this?)
 
The Bell'O speaker stands first caught me eye do to their style and design. I was looking at more expensive stands that were fully welded when I first saw the Bell'O stands. I liked that the top plate is welded to the two upright columns. I compared them with another stand using the same speakers and the Bell'O stands were more rigid. Switching stands the imaging and soundstaging were better with the more rigid Bell'Os than the Sanus EF 24 inch stands. Much of the weight in the SP224's is in the base. The stands have good carpet piercing spikes to couple to the floor under the carpet. The weight of the base and the spikes make for a very stable stand on carpeted floors. They also include soft feet for wood or tile floors. The spike feet are adjustable and once adjusted can be locked in place by a round threaded flat nut.
Pros:
The two columns, one which is a hollow steel rectangle and the other being a round hollow steel post, compliment each other to create a rigid stand. The two upright columns attach to the base at two different places to distribute the weight. The stands are easy to assemble and all hardware and tools needed are enclosed. I used small, flat and round rubber cushions under the speakers to keep them in place. The cushions are attached to the top plate of the stand and not to the speaker.
Cons:
There is no way to add mass to the stands by filling with sand or shot.
4 out of 4 people found this helpful
Was this review helpful?    Yes | No
 

1 question already asked

IS THE 7 BY 7 BASE SUFFICIENT TO HANDLE A 18# SPEAKER THAT IS 8.5W BY12.5D BY15.5H ? [ BILL  Jul 10, 2014 ]
3 answers
  • I bought these stands for Polk LSI9 speakers. The LSI9 dimensions are 15" high x 8 5/8 in" wide x 15 1/4" deep. They weigh 33 lbs. apiece. For me the stands were a perfect match for speakers of this dimension. They are ruggedly built and are modernly fashionable. If you have little kids or big pets running around your audio setup be sure to use the included fastening strips to secure the speaker to the setting plate. [ DARRELL   Jul 11, 2014 ]
  • thanks i will buy these stands in the future [ BILL   Jul 11, 2014 ]
  • Yes it will handle it. [ REGINALD L   Jul 11, 2014 ]

For a more in-depth review and enhanced detailed information on the Bell'O SP-224, please visit the Crutchfield website product page (/ISEO-rccbcspd/p_494SP224/BellO-SP-224.html ).