Lightning strikes again

Lightning Audio makes a great line of amplifiers that'll appeal to car audio fans everywhere. Their LA-4100MINI 4-channel amplifier will hit your speakers with 50 watts RMS each, giving your sound system much greater clarity and power. This handsome little amp packs its wallop using Class AB amp technology, for clean, distortion-free reproduction of your music. Want power for two speakers and a sub? You can switch the LA-4100MINI to 3-channel mode and blast a couple speakers with 50 watts each and your sub with 150 watts RMS.

Precise control

You can use the high-pass filters on the front and rear channels to keep low frequencies out of your speakers. If you've got a sub, this allows your speakers to play much louder and cleaner so they can compete with the bass. Lightning Audio includes a low-pass filter on the rear channels, so you can adjust the bass going to a sub or two when you're running the amp in 3-channel or 2-channel mode.

Lightning Audio LA-4100MINI control panel

                                               LA-4100MINI control panel

Product Highlights:

  • 4-channel car amplifier
  • 50 watts RMS x 4 at 4 ohms (75 watts RMS x 4 at 2 ohms)
  • 150 watts RMS x 2 bridged at 4 ohms (4-ohm stable in bridged mode)
  • frequency response: 20-20,000 Hz
  • Class AB amp technology
  • variable high-pass filter on front channels (20-250 Hz, 12 dB/octave)
  • variable high- and low-pass filters on rear channels (50-250 Hz, 12 dB/octave)
  • preamp inputs
  • 4-gauge power and ground leads and a 60-amp fuse recommended — wiring and hardware not included with amplifier
  • no onboard fuses — when installing multiple amps in a system, an additional 60-amp in-line fuse between the distribution block and the amplifier is recommended
  • 12-7/8"W x 2-5/16"H x 6-5/16"D
  • warranty: 1 year
  • Our 60-day money-back guarantee

My system has plenty of power. Who needs an amp?

You might think you don't need an amp because you have a 400-watt system in your car, or because your new stereo puts out 50 watts a channel. But those are peak wattage ratings, which may boil down to 15 or 20 watts per channel, using the more realistic RMS rating. An amp sends your speakers the power they need to deliver your music with clarity and impact, whether you're using factory speakers or high-performance components. And low-frequency reproduction requires lots of power, so an amp is an absolute must if you're adding a sub to your system.

Lightning Audio LA-4100MINI Reviews

Average Customer Review:

2 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $350 rewards card


Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

smaller spaces but still want power? this is your AMP!

Written By Gipper, Tennessee on Sunday, May 10, 2015

Crutchfield Customer Review (What's this?)

I did my homework on the spaces I was working with and the power I desired and this amp fit into my equation perfectly. I am pushing two Infinity Primus 2-way door speakers(rated at 70 watt RMS) and a 8" Bazooka tube(BT 8014 4-ohm) My application is underneath my driver seat in my 1995 GMC sierra sle ext. cab and when you open the driver door you cannot see the amp of the rest of the upgrade. I've got the amp controls pointed backward so any sound adjustments made are simply done by pulling lever to move seat up and the control side of the amp is now exposed. Other details about this specific install are in another review by me on the Bazooka tube (BT8014).

Pros: Smaller size yet plenty of power for a nice aftermarket upgrade. Keep the hidden/factory look but aftermarket quality sound.

Cons: None so far

2011 gmc crew cab

Written By derek, sacramento, ca on Saturday, February 01, 2014

my dealers service dept. (reliable Cadillac) gave the wiring diagram for my factory gmc bose system i removed the factory amp the nav deck has low level out puts i spliced rca connectors into them and removed the bose amp i installed a lighting audio 4100 mini and wired it 2 the front bose and the rear doors and factort center sub then installed a lighting audio 1000 mdmini to a fosgate punch 12" sub under the rear seat . the system sound incredible. and I've had no trouble. i listen to everything from nwa to hank williams

Pros: simple , no thrills and preforms great

Cons: non

Hands-on research

What's in the box?

Download owner's manual

  • 4-Channel amplifier
  • 4mm Allen wrench
  • 2mm Allen wrench
  • Four 1/2" Self-tapping screws
  • Instructions (English/ German/ French/ Spanish/ Italian)

Product Research


Gain: The front and rear amps have independent rotary gain controls adjustable from 150mV to 4V.


  • Front: high-pass; crossover point variable from 20 to 250 Hz, 12 dB/octave slope
  • Rear: switchable between low-pass, full range, and high-pass; crossover point variable from 50 to 250 Hz, 12 dB/octave slope


  • Battery: set screw terminal; accepts up to 4 gauge wire
    • Fuse: an external 60-amp fuse (not included) must be installed on the power wire; if a wiring kit is used which includes a fuse with a value other than 60-amps, the original should be replaced with a 60-amp fuse
  • Remote: set screw terminal; accepts up to 10 gauge wire
  • GND (ground): set screw terminal; accepts up to 4 gauge wire
  • Speaker Output: four pair of set screw terminals; accept up to 10 gauge wire
  • Line Inputs: 2 pair of stereo RCA jacks

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.