About the Lightning Audio L1-S410
Add some impact to your system
Add some impact to your system
If your ride's audio system sounds less than inspiring, Lightning Audio's L1-S410 10" sub can add the impact and power that you've been missing. You'll really feel the kick drum and bass lines in your favorite tracks while you ride around town, so cruising's that much more enjoyable.
The heavy-duty steel frame provides a rock-solid foundation for your bass.
Built tough
Lightning Audio built the L1-S410 with a tough polypropylene cone and a durable poly-foam surround so it'll deliver strong bass for years to come. The sub's heavy-gauge steel basket won't flex or vibrate, so your bass will stay consistent and clear, even at high levels. Lightning Audio built this sub to last, using the most up-to-date materials and design. A single 4-ohm voice-coil allows for compatibility with most amplifiers.
Product highlights:
- 10" 4-ohm subwoofer
- polypropylene cone
- poly-foam surround
- power handling: 50-150 watts RMS
- peak power handling: 300 watts
- frequency response: 23-250 Hz
- sensitivity: 85 dB
- top-mount depth: 4-13/16"
- sealed box volume: .64 cu. ft.
- ported box volume: 1.47 cu. ft.
- warranty: 1 year
- MFR # L1-S410
What's in the box:
Lightning Audio L1-S410 owner's manual
- One 10" Single voice coil 4-ohm subwoofer
- Trim ring
- Owner's manual (English/ French/ Spanish/ German)
Customer reviews for Lightning Audio L1-S410
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Lightning Audio L1-S410
Features & specs
Features and Specs | ||
---|---|---|
Size | 10 -inch | |
Impedance (Ohms) | --- | |
Cone Material | Polypropylene | |
Surround Material | Poly-Foam | |
Port diameter (inches) | 3 | |
Port length (inches) | 9.4 | |
Free-Air | No | |
Dual Voice Coil | No | |
Sensitivity |
85 dB at 1 watt | |
Frequency Response | 23 - 250 Hz | |
Max RMS Power Handling | 150 | |
Peak Power Handling (Watts) | 300 | |
Top Mount Depth (inches) | 4 13/16 | |
Bottom Mount Depth (inches) | N/A | |
Cutout Diameter or Length (inches) | 9 3/16 | |
Frame Width | 10.655 | |
Frame Length | 10.655 | |
Vas (liters) | 41.9 | |
Fs (Hz) | 30 | |
Qts | 0.59 | |
Xmax (millimeters) | 11.2 | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Box Requirements | ||
Ideal Sealed Box Volume (cubic feet) | 0.64 | |
Minimum Sealed Box Volume (cubic feet) | 0.5 | |
Maximum Sealed Box Volume (cubic feet) | 0.85 | |
Ideal Ported Box Volume (cubic feet) | 1.47 | |
Minimum Ported Box Volume (cubic feet) | N/A | |
Maximum Ported Box Volume (cubic feet) | N/A |
Product Research
Features
Enclosure Compatibility
Features
Compression Terminals: The wire terminals are spring post and will accommodate speaker wire up to 10 gauge.
CEA-2031 Compliant: Power handling for the L1-S410 conforms to CEA-2031 industry standards, meaning the subwoofer has the capacity to handle its 150 watt RMS power rating continuously.
Trim Ring: To improve the cosmetic look, a trim ring is included that mounts over the flange of the woofer. When using the PVC trim ring the woofer is first mounted with four screws, then the ring is placed on top of the woofer, aligning the final four holes of the woofer with ring. The other four screws are used for these holes to mount the ring and woofer to the enclosure. The trim ring increases the mounting height of the woofer to approximately 1" and its diameter is 11".
Enclosure Compatibility
Sealed Box: Lightning Audio recommends a sealed enclosure with an optimum internal volume of 0.64 ft³ (from 0.5 to 0.85 ft³ is acceptable). Sealed enclosures provide the most control over a woofer, will handle a lot of power, and provide accurate sonic reproduction, making them suitable to all types of music.
Ported Box: The recommended ported enclosure volume is 1.47 ft³ using one 3" diameter x 9.4" long port; this yields a tuning frequency of 38 Hz. Ported (or vented) enclosures typically provide better overall efficiency than sealed so they are suitable for use with smaller amplifiers, giving you more bass output from less power. However, this efficiency comes at the expense of very low frequency output (below 32 Hz).
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...