About the Lightning Audio LT
Raise the bar
Raise the bar
Improve your system's clarity with the Lightning Audio LT tweeters. Lightning Audio includes flush- and surface-mounting gear for a clean installation and to create the best possible soundstage for your car. Once you've installed them, sit back and listen to the natural, uncolored highs produced by these 1/2" Mylar balanced dome tweeters — you'll notice details in the music that you've never heard before. These speakers will handle up to 40 watts RMS, so they'll be a welcome addition to just about any system.
Installation note: You'll need a pair of our universal backstraps to install these tweeters in the factory locations.
Product highlights:
- two 1/2" Mylar balanced dome tweeters
- flush- and surface-mounts with swivel action
- inline high-pass crossover included
- power handling: 2-40 watts RMS (80 watts peak power)
- frequency response: 1,900-20,000 Hz
- sensitivity: 88 dB
- top-mount depth: 13/16"
- warranty: 1 year
- MFR # LT
What's in the box:
Lightning Audio LT owner's manual
- Two tweeters (46" wire attached terminated with quick-slide connectors)
- 2 Flush mount housings (installed)
- 2 Flush mount retaining rings
- 2 Surface mount housings
- Four 1/2" Flat-head screws
- Owner's manual (English/ French/ Spanish/ German/ Italian)
Customer reviews for Lightning Audio LT
Loading...
Loading reviews...
Average review:
4.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Lightning Audio LT
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 1-way | |
Tweeter Design | 1/2" Balanced Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Mylar | |
Woofer Composition | --- | |
Woofer Surround | --- | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 88 | |
Sensitivity at 2.83 volts | 91 | |
Frequency Response | 1988 - 20k Hz | |
Minimum RMS Wattage | --- | |
Maximum RMS Wattage | 40 | |
Peak Power Handling (Watts) | 80 | |
Top-mount Depth (Inches) | 0 13/16 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 1 7/8 | |
Mounting Height (Inches) | 0.296 | |
Frame Width | 2.111 | |
Frame Length | 2.111 |
Product Research
Features
Mounting: The tweeters offer multiple mounting options; choose a flush mount, surface mount, or angled surface mount. The tweeters are shipped in the flush mount housings and the angled surface mount housings are included. The back of the flush mount housing and the top of the angled surface mount housing combine to create the (non-angled) surface mount housing. Once installed in any of the housings, the tweeter will pivot slightly to optimize imaging. Depending on mounting, the dimensions are:
Flush | Surface | Angled | |
---|---|---|---|
Mounting Height | 0.296" | 1.075" | 1.658" |
Mounting Depth | 0.781" | Screw Depth | Screw Depth |
Frame Diameter | 2.111" | N/A | N/A |
Cutout Diameter | 1.825" | N/A | N/A |
Frame Width | N/A | 1.81" | 1.81" |
Frame Depth | N/A | 1.81" | 1.836" |
Crossover: Each tweeter has an integrated 6 dB/octave high-pass crossover, simplifying installation.
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...
These tweeters have a good sound and were easy to install. They have the option of surface or flush mount and are quite economical.
Mike B. from Little Rock, AR