Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Overview: The Alpine HCE-C210RD multi-view camera directly
connects to your Alpine Mobile Multimedia/Navigation head unit to give you
multiple views of the area directly behind your vehicle. This small camera should be
installed on the rear bumper by the license plate of your SUV, truck, or car. It
is compatible only with those Alpine head units with a dedicated Alpine camera
input. It does not include a hideaway box, as some multi-view cameras require.
The package consists of the multi-view camera in a waterproof housing, adjustable
mounting bracket, and necessary cable and hardware for installation.
Head Unit Compatibility: The HCE-C210RD is compatible only
with the following Alpine Mobile Multimedia/Navigation head units (as of
Multi-View Camera: The multi-view camera gives you a wide 186°
horizontal angle view of the area immediately behind your vehicle. It is
designed to give you high visibility in daylight or at night. The clear, color
images appear on the LCD screen of your compatible Alpine Mobile Multimedia/Navigation head
unit to help you see obstructions behind the vehicle as you back into a parking
spot, or to keep an eye on cargo you may be towing. The image provided by the
camera is a mirror image, so they appear the same in the monitor as what is seen
in your rear-view mirror. Other features of the camera include:
- Weatherproof housing
- 1/3.8" color CMOS image sensor with a 4:3 aspect ratio
- 1280 x 960 (1,230,000) effective pixels
- 186° horizontal viewing angle & 144°
vertical viewing angle
- Illumination Range of 2.0 lx or more (50 IRE more)
- 0.89mm focal length
- F = 2.8 brightness
Multiple Views: This multi-view camera will show you the obstacles
around the rear of the vehicle from different angles to assist you with parking,
backing up, and to even connect a trailer.
- Rear View: Displays an image of the area directly behind the
vehicle. Use this when backing into a parking space.
- Corner View: Displays a divided image left and right of center.
Use this when checking the left and right area directly behind your vehicle
- Panorama View: Display a general perspective of what is behind
the car. Use this when you want to check mainly behind the vehicle.
- Ground View: Displays an image from above down to the lower
section for the vehicle. Use this when determining the vehicle's position in
relation to the curb, a trailer hitch, etc..
Mounting: The multi-view camera comes supplied with a bracket
designed to mount to the rear of your vehicle. The mounting bracket comes
supplied with a self-adhesive pad and 4 mounting screws. The bracket allows you
to adjust the camera angle up or down. The camera comes with a long cable to run
the power and signal from the head unit to the camera. The HCE-C210RD also comes
supplied with 5 self-adhesive cable clips for wire management.
Optional License Plate Mounting Kit (sold separately): The optional
Alpine KTX-C10LP Rearview Camera License Plate Mounting Kit (500KTXC10L,
sold separately) allows you to mount the mulit-view camera on your vehicle's
- Width = 0.9375"
- Height = 0.9375"
- Depth = 1.25"
- Width = 1.625"
- Height = 1.1875"
- Depth = 0.8125"