Skip Navigation

Alpine MRP-M1000

Mono subwoofer amplifier
1,000 watts RMS x 1 at 2 ohms

18 Reviews

Watch a product review

Item #: 500MRP1000

This item is no longer available.

Original Price: $329.99

Shop all Car Amplifiers

Overview

Our take on the Alpine MRP-M1000

V-Power amplifiers deliver the sound quality that made Alpine famous. Highly efficient power supplies housed in sleek black casings guarantee that these amps stand out in performance and appearance. The thermal management system dissipates heat and saves power, so your V-Power amp will run reliably for years to come.

Alpine Authorized Online Dealer

V-Power amplifiers deliver the sound quality that made Alpine famous. Highly efficient power supplies housed in sleek black casings guarantee that these amps stand out in performance and appearance. The thermal management system dissipates heat and saves power, so your V-Power amp will run reliably for years to come.

The Alpine MRP-M1000 mono amplifier drives your subwoofer system with up to 1,000 watts RMS — enough to satisfy the hungriest bass setup. The low-pass filter puts you in command of the frequencies that reach your subs, while the variable bass boost is armed with plenty of low-end punch. A subsonic filter prevents wasted energy by eliminating ultra-low bass, putting all the power where you need it.

Preamp- and speaker-level inputs allow you to connect this amp in almost any vehicle. Let a V-Power amplifier transform the sound of your car's audio system.

Note: Sorry, Crutchfield cannot ship Alpine products to Guam or Puerto Rico.

This amp is a beast. I have 2 Kicker Solo Classics (600 rms each) and they match up nicely. She does run pretty hot which can't be good so I took off one star. Lets see how it holds up. A true 1000 rms watts at 2 ohms is hard to beat at the price. I recommend this baby.

07avy, Atlanta. GA

Featured Video:

What's in the Box:

  • Mono amplifier
  • Four 25 amp fuses (installed)
  • 7" Speaker-level input harness (4-pin Molex plug on one end and bare wires on the other)
  • 2 Terminal covers
  • 4 Self-tapping hex-head screws (M4 x 20mm)
  • 4 Machine screws for securing terminal covers (M3 x 12mm)
  • Owner's Manual (English/French/Spanish)
  • Customer Care Registration card

Product Highlights:

  • mono subwoofer car amplifier
  • 600 watts RMS x 1 at 4 ohms (1,000 watts RMS x 1 at 2 ohms)
  • variable low-pass filter (50-200 Hz, 24 dB/octave)
  • variable bass boost (0-12 dB at 50 Hz)
  • subsonic filter (15 Hz, 24 dB/octave)
  • Class D amp with MOSFET power supply
  • CEA-2006 compliant
  • STAR Topology (minimizes internal noise and prevents ground interference)
  • speaker- and preamp-level inputs
  • gold-plated screw terminals
  • fuse rating: 25A x 4
  • 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
  • 15"W x 2-7/16"H x 9-9/16"D
  • warranty: 1 year
  • Our 60-day money-back guarantee
Reviews

Alpine MRP-M1000 Reviews

Average Customer Review:

18 Reviews

Good Amp

Written by: 07avy from Atlanta. GA on December 2, 2012

This amp is a beast. I have 2 Kicker Solo Classics (600 rms each) and they match up nicely. She does run pretty hot which can't be good so I took off one star. Lets see how it holds up. A true 1000 rms watts at 2 ohms is hard to beat at the price. I recommend this baby.

Pros: not too big, powerful, easy connections and tuning & great price

Cons: no rca outs, no bass knob (can buy a universal) & does run hot but has yet to shut down

Can't take the heat

Written by: Gary J from Tulsa, OK on March 27, 2012

Crutchfield Customer Review (What's this?)

First off, this amp was installed correctly with plenty of airspace and wired correctly. Like others have stated, it sounds great! That only lasts for maybe 30 minutes if you are really pushing your subs and it then goes into protect mode. I had it connected to two Polk MM 12" DVC speakers in a sealed box. It got about as loud as I expected it too but it could not handle much volume for long. After a couple months it gave up the ghost. Not impressed. ' '

Pros: Sounds great.

Cons: Overheats

Alpine MRD-1000D

Written by: foursixty from Senatobia MS on February 5, 2011

I've had it nearly three years and it was at least a couple of years old when I bought it. I used it on 2 12" Audiobahn 550RMS subs. It absolutely pounded. Keep in mind they are in a custom sealed box behind the seat of a single cab S-10, Unreal how loud it was in that tiny box. Not only loud, but the Alpine amp has a musicality about it that most other sub amps just don't have. Just take a look at the S/N ratio. The ratio is better than 100. Less noise equals cleaner power. I finally got the best of one of my subs after 2yrs. I replaced the subs with 2 Kicker Solo Classic 12's. Now it's just as loud and hits deeper and sounds even better. I have never had this amp cut out or do anything other than what it was designed to. If you take the time to hook this amp as it was meant, it is absolutely bullet-proof. I love it.

Pros:

Cons:

One bad amp!

Written by: chris from Lindenhurst, IL on June 26, 2010

Crutchfield Customer Review (What's this?)

This amp is super bad. I'm pushing 2 Alpine 1242D type R's in a sealed box. After i hooked up the amp and subs and turned it on, I could not believe how hard the subs where pounding. I would recommend this amp if you want some serious hard hitting sounds. It's worth the money. Thanks Troy !

Pros:

Cons:

You need this AMP!

Written by: Jeremy from Houston, TX on July 6, 2009

Crutchfield Customer Review (What's this?)

I am using this AMP to power two Kenwood W3012 subwoofers with signal from a Kenwood DNX-7140. The AMP is clear, powerful and very clean. This setup sounds great and has enough power to practically shake the ground.

Pros:

Cons:

Ok amp for the buck

Written by: Joseph from Roanoke, VA on June 17, 2009

I had one of these amp briefly to replace an older Alpine M300 amp that I had. It put out a lot of power, but did get hot on me quite a bit, powering 2 infinity perfect 10 subs. I decided to replace this amp with another Alpine PDX 1.600 amp and although the PDX was only 600 watts compared to this 1000 watt amp, in my opinion the PDX digital amps by Alpine sounds worlds better. The bass hit loud and sounded quite a bit cleaner with the PDX amp. Because the PDX amp is a digital amp it didn't get hot like the vpower amp I had. The pdx amp just got a little warm and didn't seem to draw as much power as noticable with my lights not dimming as much with each bass note. It is a good amp for the price, but from my experience, I'd spend the extra $$$ for the Alpine PDX amp. U wont regret it...

Pros:

Cons:

alpine m-1000

Written by: 3895 from lancaster, ma on April 29, 2009

I bought this amp to replace my old rockford amp ive had for almost 10yrs and not too happy with the alpine m-1000. I'm using it to power my JL 12w7 the quality of sound that comes out is better but my old rockford is so much louder.

Pros:

Cons:

Dan

Written by: Dani from New Jersey on April 13, 2009

Crutchfield Customer Review (What's this?)

This is a great amp. I had jl and kenwood amps and they dont compare to this. I got this hooked up to two alpine 12" type r and it bumps hard. u can hear me comin from at least one city block away and i shake any car around me no joke. when people r standin around my car they can feel the ground vibratin which is kinda funny cuz the cops to like it too much when they pull up next to me at a stop lite and their car is shakin. Luckily i got nice cops who havent given me any tickets and actually complimented me on how loud it is and i also set off car alarms which gets sum people mad. gonna b gettin a 12" type x in the next month but still decidin if i should get 2 type x and another one of these amps. mite b too much base tho kinda scared that i mite break a window lol

Pros:

Cons:

would have given it a 5 but

Written by: rip21 from mo county,md on March 4, 2009

tryed to hook this amp to 2 type r's that was dumb because u cant do it, because it is made to power only 1 sub. thank god crutchfield was able to exchange my type r's and upgraded to get a 12"type x(should have done that in the first place.) as far as powering the type x i couldnt ask for anything better.

Pros:

Cons:

Alpine is best

Written by: mark from Champaign, IL on February 23, 2009

Crutchfield Customer Review (What's this?)

Alright, so here it is. I bought an entire system off of crutchfield.. I went with 4 12'' JL audio subs and 2 alpine 1000watt amps. Alpine reciever, rockford fostgate wiring and CAP. It is LOUD. Havent had a problem with the amps.. They are nice looking and work excellent. 5 STARS.

Pros:

Cons:

Powers 2 Type R 12's PERFECT!!!!

Written by: Keith from Shoreview, MN on February 23, 2009

Crutchfield Customer Review (What's this?)

I recently just got 2 Type R 12 inch 2 ohm subs and put then in a custom sealed box at the recommended .85 cu. ft. paired up with the V power 1000 watt RMS @ 2 ohm and my Pioneer HU is at -11 and these things still shake my rear view!!! Once they get broken in I'll really crank them up and see what they can do. Great Subs for their SQ and SPL!!!!

Pros:

Cons:

WOOOOOOW

Written by: mary from Green Ohio on February 16, 2009

This is powerfull!!! It pushes a 15'' RF P2 DVC wired to 2 ohms. and it ratals!!=)

Pros:

Cons:

Alpine MRP-M1000

Written by: lilbrom from hobbs,nm on January 23, 2009

this is by far the best amp ive ever had it puts out enough power for two 12w6's.

Pros:

Cons:

Big Power

Written by: tower from Houston, TX on November 21, 2008

Bigger brother of the MRP-M500 -- identical for the most part, just 50% longer and putting out 2x the power for 2x the price. 1000W RMS @ 2ohms is a significant amount of power and is more than enough to push even the beefier, more expensive subs. I've used this amp on a single Alpine Type-R 15" (4+4ohm obviously, as this amp is not 1ohm capable and therefore not ideal for a single 2+2ohm sub) or on two JL 12W3's with pleasing results, though neither setup could handle all of the amp's power. As long as your subs are wired correctly and tuned properly, it will never shut off on you. It looks nice too, with end caps to cover up the connections and settings. I highly suggest a charging system upgrade with it though (capacitor or secondary battery), as it draws quite a bit of current.

Pros:

Cons:

Best Amp

Written by: Frank from Ct on November 21, 2008

Crutchfield Customer Review (What's this?)

If you want power you found it. I just bout this amp and two alpine subs and boy is it amazing. This amp is by far the best I ever use. The sound quality and bass are outstanding. I recommend this to anyone looking for a high quality system.

Pros:

Cons:

Alpine MRP-M1000

Written by: gold232 from Klawock AK on November 13, 2008

Crutchfield Customer Review (What's this?)

this amp can really push some subs i like it havent had it shut down on me yet and i like cranking it. if i do find its a problem ill put a fan on it.

Pros:

Cons:

Pretty decent for the price!

Written by: T-RAY from Foley, AL on June 6, 2008

Crutchfield Customer Review (What's this?)

I am curently using this amp as a replacement for my PDX-1.1000. It performs nicely, doesn't get too hot, and has a nice appearance. My PDX is curently under repair at Crutch so I needed a replacement so I bought this one cause I absolutely love Alpine products! The only reason I didn't give this one a perfect score is because I dont believe it pushes my type X as hard as my PDX did! It has cut out on me twice but man was I jammin! I turned my HU off then back on and it came right back, small annoyance, but this amp is still a great buy!

Pros:

Cons:

Clean, Solid Bass!!!

Written by: Ronald from Indianapolis, Indiana on April 1, 2008

This amp will definetly push your subs! I have this amp hooked up to 2 12" Alpine Type R @ a 2ohm load and they sound excellent! The bass is clean and solid with no distortion. The only problem I have with this amp is if you play your music really loud like I do the amp will get hot and shut off in about 20 to 30 min, but keep in mind thats with the volume really cranked up. But overall you will be very happy with the sound quality.

Pros:

Cons:

Details

Hands-on research

What's in the box?

Download the Alpine MRP-M1000 manual

  • Mono amplifier
  • Four 25 amp fuses (installed)
  • 7" Speaker-level input harness (4-pin Molex plug on one end and bare wires on the other)
  • 2 Terminal covers
  • 4 Self-tapping hex-head screws (M4 x 20mm)
  • 4 Machine screws for securing terminal covers (M3 x 12mm)
  • Owner's Manual (English/French/Spanish)
  • Customer Care Registration card

Product Research

Features
Controls
Connections

Features

Power Supply: The MRP-M1000 amplifier's power supply uses MOSFETs to convert DC battery voltage to the higher DC voltages needed for high power. It supplies positive and negative voltages around 0V, rather than around 6V as with conventional single-polarity power supplies. The result is higher power levels and a dynamic range wider by as much as 10dB.

Inputs: The amplifier offers both line-level and speaker-level inputs for 2 channels. The supplied speaker-level input harness allows you to connect this amplifier to a receiver without preamp outputs; aftermarket or factory. The speaker level inputs will accept the output from a high powered radio.

Terminal Covers: The amp comes with two plastic covers that protect and insulate the RCA, power, and speaker connections. Four supplied machine screws attach the covers to the amplifier.

Controls

Low Pass Filter: The amp is equipped with a 50-200Hz variable low-pass filter with a slope of 24dB/octave. This being a mono subwoofer amp, the crossover is always engaged.

Subsonic Filter: This amp utilizes a subsonic filter at 15Hz to eliminate super low frequencies that can rob power and damage speakers. The subsonic filter operates at all times, and cannot be turned off.

Bass EQ: The Bass EQ circuit provides a variable boost (0-12dB) at 50 Hz.

Connections

Left Side Of Amplifier:

  • GND (ground): gold-plated set screw terminal, accommodates bare wire up to 4 gauge
  • Battery: gold-plated set screw terminal, accommodates bare wire up to 4 gauge
  • Remote: gold-plated set screw terminal, accommodates bare wire up to 8 gauge
  • Speaker Output: gold-plated set screw terminal, accommodates bare wire up to 8 gauge

Note: Alpine recommends 4 gauge power and ground wire (minimum).

Right Side Of Amplifier:

  • Line Inputs: 1 pair of gold-plated stereo RCA jacks
  • Speaker Level Input: Molex plug input for supplied 4-pin harness

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Library