Inputs and Outputs
V-Power: Alpine's V-Power series amplifiers offer clean power output,
clarity and detail at any volume level, and exceptional reliability. V-Power
amplifiers feature rugged heat sinks that ensure optimum temperature and
performance for non-stop output. The V-Power amplifiers are ideal for upgrading
aftermarket or factory equipment and can be connected to just about any system.
RCA and High-level inputs ensure easy installation, while flush mount controls
make for an easy set-up. The V-Power amplifier also come with end caps that
cover the inputs and connectors to create a clean, finished installation. In
addition, variable crossover and Bass EQ functions provide flexible tuning
possibilities for your car audio system.
Thermal Management: The amplifier utilizes rugged heat sinks and an
extremely sophisticated thermal management processor to continuously monitor the
amplifier's temperature, ensure nonstop output and stable, reliable performance.
Gain Controls: This amp has
independent front and rear channel gain controls.
Crossovers: Both front and rear
channels have independently selectable high-pass and low-pass variable 50-400 Hz
crossovers with a slope of 12dB/octave. The crossovers can also be independently
turned off for full-range operation.
Subsonic Filter: This amp utilizes a fixed-automatic 15Hz, 18 dB/oct
subsonic filter to eliminate super low frequencies that can rob power from your
amplifier and damage your speakers.
Bass EQ: The Bass EQ circuit
provides a fixed boost of 12dB at 50 Hz for the rear channels only. The Bass EQ does not function when the amp's rear-channel crossover is set to "high-pass" operation.
Inputs: The amplifier offers
both line-level and speaker-level inputs for 4 channels. The supplied speaker-level
input harness allows you to connect this amplifier to a receiver without preamp
outputs; aftermarket or factory.
Line Outputs: This amplifier
has a pair of non-fading stereo RCA line outputs. You can use these outputs to
daisy-chain another amplifier without having to run additional signal cables
from the receiver.
Terminal Cover: The amp comes with
plastic covers that protect and insulates the RCA, power, and speaker connections.
machine screws attach the cover to the amplifier.
Left Side Of Amplifier:
- GND: Gold-plated set screw terminal, accommodates bare wire up to 4
- Battery: Gold-plated set screw terminal, accommodates bare wire up to
Gold-plated set screw terminal, accommodates bare wire up to 8 gauge
- Speaker Outputs: Gold-plated
terminal strips for 4 speakers, 0.3125" wide
Right Side Of Amplifier:
- Line Inputs: 2 pair of gold-plated
stereo RCA jacks
- Line Outputs: 1 pair of
gold-plated stereo RCA jacks
- Speaker Level Input: Molex
plug input for supplied 8-pin harness
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to
find elsewhere. That's because we have our own in-house Product Research
team. They verify what’s in the box, check the owner's manual, and record
dimensions, features and specs. We stay on top of new products and technologies
to help people make informed choices.